There are 217 products.
W/F/KSZS89/63
Satin stainless steel slanted exhaust tip without a clamp with a diffuser.
The first photo shows the applied logo on the tip.
W/F/KSZS89/63DK
Satin stainless steel slanted exhaust tip without a clamp with a diffuser.
The first photo shows the applied logo on the tip.
EM007
Muffler dimensions:
Can height / width - 180x100 mm
The length of the silencer box - 250/300/350/400/450/500 mm
Inlet diameter - 50 / 60 / 63.5 / 70 / 76 mm
The product is not homologated and cannot be approved for use on public roads in the EU.
W/F/KSZS89/63DP
Satin stainless steel slanted exhaust tip without a clamp with a diffuser.
The first photo shows the applied logo on the tip.
EM006
Muffler dimensions:
Can height / width - 180x100 mm
The length of the silencer box - 250/300/350/400/450/500 mm
Inlet diameter - 50 / 60 / 63.5 / 70 mm
The product is also available in a version with an embossing inside the passage that improves damping.
The product is not homologated and cannot be approved for use on public roads in the EU.
W/C/N/KSCP89/63DCS
Satin stainless steel slanted exhaust tip without a clamp with a diffuser.
The first photo shows the applied logo on the tip.
EM010
Muffler dimensions:
Can height / width - 180x100 mm
The length of the silencer box - 250/300/350/400/450/500 mm
Inlet diameter - 50 / 60 / 63.5 / 70 mm
The product is also available in a version with an embossing inside the passage that improves damping.
The product is not homologated and cannot be approved for use on public roads in the EU.
W/C/KPCP101/50DS
Satin stainless steel slanted exhaust tip without a clamp with a diffuser.
The first photo shows the applied logo on the tip.
W/C/KPCP101/63DCS
Straight exhaust tip made of polished stainless steel without a clamp with a diffuser.
The first photo shows the applied logo on the tip.
W/C/KPCP101/63DS
Satin stainless steel slanted exhaust tip without a clamp with a diffuser.
The first photo shows the applied logo on the tip.
W/C/KPCP101/76DCS
Satin stainless steel slanted exhaust tip without a clamp with a diffuser.
The first photo shows the applied logo on the tip.
W/C/KPCP89/50DCS
Satin stainless steel exhaust tip without a clamp with a diffuser.
The first photo shows the applied logo on the tip.
W/C/KPCP89/63DCS
Satin stainless steel slanted exhaust tip without a clamp with a diffuser.
The first photo shows the applied logo on the tip.
W/C/KSCP101/63DCS
Satin stainless steel slanted exhaust tip without a clamp with a diffuser.
The first photo shows the applied logo on the tip.
W/C/KPZP89/63DP
Satin stainless steel slanted exhaust tip without a clamp with a diffuser.
The first photo shows the applied logo on the tip.
W/C/KPCP101/76DCS
Satin stainless steel slanted exhaust tip without a clamp with a diffuser.
The first photo shows the applied logo on the tip.
RM01/63/130/350
Muffler ready to weld in the place of the original one. Pipe diameter, dimensions of the muffler box and its length are selected in such a way so that the silencer assembly is as easy as possible.
A silencer with a straight-through construction, damped with stainless steel wool and a glass mat resistant to 800 degrees Celsius (glass mat made of full hair - we do not use scraps). Fully welded by welding robot, hand finished. Each element of the product is made using CNC technology. Crack-resistant embossed bottoms have been used.
Muffler dimensions:
Can length - 350 mm
Pipe diameter - 63.5 mm
Can diameter - 130 mm
The product is not homologated and cannot be approved for use on public roads in the EU.
E002/60/450
Muffler RM MOTORS JEEP Cherokee XJ, 2.5 and 4.0 benz.
Below is a detailed list of models:
2.5 (EPE) 2469ccm 121KM / 89kW 1995 / 10-2001 / 09
2.5 SE (EPE) 2464ccm 118KM / 87kW 1996 / 10-1999 / 09
2.5 i 4x4 (EPE HX) 2469ccm 122KM / 90kW 1991 / 12-2001 / 09
4.0 i (MX) 3960ccm 184KM / 135kW 1999 / 02-2001 / 09
4.0 i (MX) 3964ccm 184KM / 135kW 1991 / 12-2001 / 09
4.0 i 4x4 (ERH) 3964ccm 178KM / 131kW 1995/01-2001/09
Muffler to be welded on in place of the original one. The diameter of the pipe, the dimensions of the muffler box and its length are selected so that the assembly of the silencer is as easy as possible.
Model: E002 / 60/450
The product is not homologated and cannot be approved for use on public roads in the EU.
RM01/63/130/350
Muffler to weld in the place of the original one. Pipe diameter, dimensions of the muffler box and its length are selected in such a way so that the silencer assembly is as easy as possible.
A silencer with a straight-through construction, damped with stainless steel wool and a glass mat resistant to 800 degrees Celsius (glass mat made of full hair - we do not use scraps). Fully welded by welding robot, hand finished. Each element of the product is made using CNC technology. Crack-resistant embossed bottoms have been used.
Muffler dimensions:
Can length - 350 mm
Pipe diameter - 63.5 mm
Can diameter - 130 mm
The product is not homologated and cannot be approved for use on public roads in the EU.
W/C/KSCP89/50DCS
Satin stainless steel slanted exhaust tip without a clamp with a diffuser.
The first photo shows the applied logo on the tip.
W/C/KSCS89/76DS
Satin stainless steel slanted exhaust tip without a clamp with a diffuser.
The first photo shows the applied logo on the tip.
E010/63/350
Muffler to weld in the place of the original one. Pipe diameter, dimensions of the muffler box and its length are selected in such a way as so that the silencer assembly is as easy as possible.
A silencer with a straight-through construction, damped with stainless steel wool and a glass mat resistant to 800 degrees Celsius (glass mat made of full hair - we do not use scraps). Fully welded by welding robot, hand finished. Each element of the product is made using CNC technology. Crack-resistant embossed bottoms have been used.
Muffler dimensions:
Can length - 350 mm
Pipe diameter - 63.5 mm
Can dimensions - 130x220 mm
The product is not homologated and cannot be approved for use on public roads in the EU.
W/F/KPCP101/50
Satin stainless steel slanted exhaust tip without a clamp with a diffuser.
The first photo shows the applied logo on the tip.
E002/63/350
Muffler to weld in the place of the original one. Pipe diameter, dimensions of the muffler box and its length are selected in such a way so that the silencer assembly is as easy as possible.
A silencer with a straight-through construction, damped with stainless steel wool and a glass mat resistant to 800 degrees Celsius (glass mat made of full hair - we do not use scraps). Fully welded by welding robot, hand finished. Each element of the product is made using CNC technology. Crack-resistant embossed bottoms have been used.
Muffler dimensions:
Can length - 350 mm
Pipe diameter - 63.5 mm
Can dimensions - 130x220 mm
The product is not homologated and cannot be approved for use on public roads in the EU.
Polski
