RM02
DIMENSIONS: Length of the box - 650 - 950mm (every 50 mm)
Diameter of the box - 110/120/130/140/150/160 mm
Diameter of the inlet and inner pipe - 50/54/57/60/63,5/70/76 mm
The product is not homologated and cannot be approved for use on public roads in the EU.
Sport silencer with through-body design
- Made entirely of acid-resistant steel T304
- Fully welded, hand finished
- Fully manufactured in Poland
- 24 months warranty
The interior of the muffler consists of:
- Stainless steel perforated tubes
- Stainless steel wool resistant to 800 degrees Celsius
- Fire-resistant full-pile glass mat
- Stamped, crack-resistant bottom
RM02 silencers with a box diameter greater than 130 mm and a length of 400 mm are not returnable, and their production time may be extended.
Data sheet
Specific References
| Reference | Can length | Inlet diameter | Can diameter | Price | Add to cart |
|---|---|---|---|---|---|
W/MAZDA-MX5/BLENDA
Mazda MX5 (ND)
2014-2019
Convertible/Coupe
1.5, 2.0l
131, 132, 160, 184 bhp
RWD
PROM.BUM2/B
Fits:
W/C/KPCS101/76DCS
Satin stainless steel exhaust tip without a clamp with a diffuser.
The first photo shows the applied logo on the tip.
KSCP
Polished stainless steel tip available with or without clamp.
Intake diameter inside - 50 / 63,5 / 76 mm
Diameter of the tip - 76 / 89 / 101 mm
Total length of the tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
Tip length - 105 mm
220108
Downpipe AUDI A7 SPORTBACK 2.0 TFSI +heat shield
2.0 TFSI
2020-2021
245 km
Quattro
Pipe diameter - 76 mm
There is a choice of versions:
without silencer, with a silencer or with catalytic converter
In addition, you can choose a version with or without a heat shield:
The product is not homologated and cannot be approved for use on public roads in the EU.
112129
Downpipe BMW G20 330e, 320iX, 330iX
B48
Plug-in hybrid
2018-2021
184, 258, 292 bhp
RWD
Średnica rury - 88,9 mm
Średnica rury w miejscu łączenia z sekcją środkową - 80 mm
PROM.SQ24
The plow fits:
Assembly instructions for plows: YouTube - SQUDDE
PROM.SQ25
The plow fits:
KSZS/DK
Satin stainless steel tip available with or without clamp.
Intake diameter inside - 50 / 63,5 / 76 mm
Diameter of the tip - 76 / 89 / 101 mm
Total length of the tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
Tip length - 105 mm
PROM.931102+931103
Downpipe TOYOTA Yaris GR 1.6
1,6
2020-
261 km
AWD
Downpipe diameter - 76 mm
The kit does not include mounting screws and gaskets.
It is possible to buy another part of the system - CATBACK TOYOTA YARIS GR
The product is not homologated and cannot be approved for use on public roads in the EU.
All possible downpipe configuration options can be found below.
220109
Downpipe AUDI A5 S5 / Cabriolet / Sportback / Coupe 3.0 TDI +heat shield
3.0 TDI
AUDI A5 S5 / Cabriolet
2018-2021
AUDI A5 S5 / Sportback / Coupe
2017-2021
286 hp
Quattro
Pipe diameter - 76 mm
There is a choice of versions:
without silencer, with a silencer or with catalytic converter.
In addition, you can choose a version with or without a heat shield.
The product is not homologated and cannot be approved for use on public roads in the EU.
RM04
Sport straight through silencer made of acid-resistant steel
Can length - 300/400/480 mm
Can diameter - 88.9 mm
Inlet / passage diameter - 50/57/63.5 mm
The product is not homologated and cannot be approved for use on public roads in the EU.
PROM.213520C/MS
Downpipe Volkswagen Tiguan II R 2.0 TSI with catalyst
2.0 TSI
2020-
310 bhp
AWD
Fits OPF versions
Casting material - stainless steel AISI 316L
Wall thickness - 3 mm
Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm
The product is not homologated and cannot be approved for use on public roads in the EU.
Possible options for configuring the kit are listed below.
PROM.213520+213521
Downpipe Cupra Ateca
2.0 TSI
2021-2022
300 bhp
4Drive
Fits OPF versions
Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm
The product is not homologated and cannot be approved for use on public roads in the EU.
Possible options for configuring the kit are listed below.
E008/63/350
Universal silencer made of acid-resistant steel
Inlet and outlet diameter - 63.5 mm
Height x width x length of the silencer box - 130x220x350 mm
The product is also available in a version with an embossing inside the passage that improves damping.
Check also other silencers from our offer.
The product is not homologated and cannot be approved for use on public roads in the EU.
Polski
36 rat x ~21 zł
