The plow fits:

• YAMAHA GRIZZLY 700 HUNTER (US) 2007
• YAMAHA GRIZZLY 700 FI (EUR) 2008
• YAMAHA GRIZZLY 700 EPS (EUR) 2009
• YAMAHA GRIZZLY 700 FI (EUR) 2010 
• YAMAHA GRIZZLY 700 FI (EUR) 2011
• YAMAHA GRIZZLY 700 (US) 2011
  
  
  Assembly instructions for plows: YouTube - SQUDDE
  

Can Am Maverick X3 Turbo sports exhaust with silencer
Downpipe fits X3, X RC TURBO RR, X3 Turbo R X RS versions.

2017-

Pipe diameter - 63.5 mm

The silencer mount has been designed with extreme care to provide maximum comfort and functionality for Can Am Maverick users.
With this solution, it is possible to easily mount the spare wheel at the rear of the vehicle, which is a great advantage in case of a breakdown while driving.

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal silencer based on aluminized construction of the box.
Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 63 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal silencer based on aluminized construction of the box.
Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 2x76 mm
Diameter of the inlet - 50 mm, 2x50 mm, 63 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal through-hole muffler made of acid-resistant steel with embossing.
Silencer has a visible deformation, fully operational and ready to use, comes with 24 months warranty.

Height/width of the box - 130x220 mm
Length of the silencer can - 300 mm
Diameter of the intake - 63.5 mm
Length of intake pipe - 50 mm

Fits:

• CF MOTO CFORCE 625 (2020-2024)

Downpipe AUDI A8 S8 / Quattro 3.0 TDI +heat shield

3.0 TDI
AUDI A8 S8 D5
2018-2021

AUDI A8 S8 Quattro
2019-2021

286 HP

Pipe diameter - 76 mm

There is a choice of versions:
without silencer, with a silencer or with catalytic converter.

In addition, you can choose a version with or without a heat shield.

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe Lancia Delta 1.4T
1,4T 
120, 150 bhp
2008-2012 
FWD

Pipe diameter - 76 mm
Diameter at the connection point with the turbo - 70 mm
Diameter at the connection point with the downpipe - 56 mm 

The product is not homologated and cannot be approved for use on public roads in the EU.

RM Motors oval beveled tip in satin stainless steel, choice with or without clamp.

Inner intake diameter - 51 / 63.5 mm
Tip width - 100 mm
Tip height - 77 mm
Overall length - 140 mm
Tip length - 105 mm
Bevel angle - 19°

Complete exhaust system for Skoda Octavia III RS 2.0 TSI

2.0 TSI

2013-2016

220/230 bhp

FWD

Downpipe diameter - 76mm

Exhaust pipe diameter - 63.5 mm

It is also possible to purchase the downpipe itself or the catback system itself.

The product is not homologated and cannot be approved for use on public roads in the EU.

Stainless steel embossed damper with integral damper 
Valve type - Electric
Pipe diameter - 63,5 mm, 76 mm
Height x width x length of the silencer box - 130x220x350 mm

Check also other silencers from our offer.

Polished stainless steel tip with diffuser, choice of with or without clamp.

Intake diameter inside - 50 / 63,5 / 76 mm
Diameter of the tip - 76 / 89 / 101 mm
Total length of the tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
Tip length - 105 mm

Catback - Jeep Grand Cherokee V6 3.6L, V8 5.7L

2014-2021

V6 3.6L/V8 5.7L

286/352 bhp

Automatic

4x4

Exhaust pipe diameter - 63.5 mm 

Tip diameter - 63.5 mm inlet / 114 mm outlet

Below you can choose an end silencer with or without a valve and select the appropriate tips.

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe Skoda Superb 2.0 TSI with catalyst 

2.0 TSI 
2020-
310 bhp
AWD
Fits OPF versions

Casting material - stainless steel AISI 316L
Wall thickness - 3 mm

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Possible options for configuring the kit are listed below.

Straight-through transverse silencer with electric valve.

Height/width of the box - 130x220 mm
Length of the silencer box - 350 mm
Total length - 570 mm
Intake/outlet diameter - 76 mm 

Valve type - Electric
Side - Left / Right

It is possible to select the appropriate tips:
For 76 mm diameter muffler - LINK

Universal passage silencer made of stainless steel.

Can height / width - 130x220 mm
Damper can length - 250, 300, 350, 400, 450, 500 mm
Inlet diameter - 50, 60, 63.5, 70, 76, mm
Inlet pipe length - 50 mm

The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

The plow fits:

• YAMAHA GRIZZLY 700 HUNTER (US) 2007
• YAMAHA GRIZZLY 700 FI (EUR) 2008
• YAMAHA GRIZZLY 700 EPS (EUR) 2009
• YAMAHA GRIZZLY 700 FI (EUR) 2010 
• YAMAHA GRIZZLY 700 FI (EUR) 2011
• YAMAHA GRIZZLY 700 (US) 2011
  
  
  Assembly instructions for plows: YouTube - SQUDDE
  

Can Am Maverick X3 Turbo sports exhaust with silencer
Downpipe fits X3, X RC TURBO RR, X3 Turbo R X RS versions.

2017-

Pipe diameter - 63.5 mm

The silencer mount has been designed with extreme care to provide maximum comfort and functionality for Can Am Maverick users.
With this solution, it is possible to easily mount the spare wheel at the rear of the vehicle, which is a great advantage in case of a breakdown while driving.

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal silencer based on aluminized construction of the box.
Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 63 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal silencer based on aluminized construction of the box.
Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 2x76 mm
Diameter of the inlet - 50 mm, 2x50 mm, 63 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal through-hole muffler made of acid-resistant steel with embossing.
Silencer has a visible deformation, fully operational and ready to use, comes with 24 months warranty.

Height/width of the box - 130x220 mm
Length of the silencer can - 300 mm
Diameter of the intake - 63.5 mm
Length of intake pipe - 50 mm