Satin stainless steel straight tip with welded diffuser, available with or without clamp.

Intake diameter inside - 50 / 63,5 / 76 mm
Diameter of the tip - 76 / 89 / 101 mm
Total length of the tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
Tip length - 105 mm

Downpipe Skoda Superb
2.0 TSI 
2020-
280 bhp
AWD
Fits OPF versions

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Possible options for configuring the kit are listed below.

Muffler dimensions:

Can height / width - 180x100 mm
The length of the silencer box - 250/300/350/400/450/500 mm
Inlet diameter - 50 / 60 / 63.5 / 70 mm

The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe set for AUDI A7 Sportback 3.0 TDI +heat shield

3.0 TDI
2020-2021
286 hp
Quattro

Pipe diameter - 76 mm

There is a choice of versions:
without silencer, with a silencer or with catalytic converter.

In addition, you can choose a version with or without a heat shield.

The product is not homologated and cannot be approved for use on public roads in the EU.

Polished stainless steel slanted exhaust tip without a clamp with a diffuser.

• Inner intake diameter - 76 mm
• Diameter of the tip - 89 mm 
• Total length of tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
• Tip length - 105 mm

The first photo shows the applied logo on the tip.

Downpipe Fiat 500X 1.4T
1,4T 
170 bhp
2015-2018
FWD

Pipe diameter - 76 mm
Diameter at the connection point with the turbo - 70 mm
Diameter at the connection point with the downpipe - 56 mm 

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe set for AUDI Q5 3.0 TDI +heat shield

3.0 TDI
2017-2021
286 hp

Pipe diameter - 76 mm

There is a choice of versions:
without silencer, with a silencer or with catalytic converter.

In addition, you can choose a version with or without a heat shield.

The product is not homologated and cannot be approved for use on public roads in the EU.

Round through silencer
Diameter of silencer - 150 mm
Silencer length - 350 mm
Tip length - 150 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

RM Motors zip-up hoodie

•     80% ring-spun cotton; 20% polyester
•     simpler cut for a modern look
•     double-layer hood with a covered seam drawstring tunnel
•     covered seam on shoulders, cuffs, and hem
•     flat, wide ribbed cuffs with buttonholes
•     headphone access
•     fabric weight: 280 gsm

Available sizes: S-XL.

BMW 2"/2.25"/2.5"/2.75"/3" exhaust throttle actuator
OE number: 18307851568

Stainless steel embossed damper with integral damper 
Valve type - Electric
Pipe diameter - 63,5 mm, 76 mm
Height x width x length of the silencer box - 130x220x350 mm

Check also other silencers from our offer.

Downpipe Audi SQ2 2.0 TFSI with catalyst 

2.0 TSI 
2020-
310 bhp
AWD
Fits OPF versions

Casting material - stainless steel AISI 316L
Wall thickness - 3 mm

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

Possible options for configuring the kit are listed below.

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe Volkswagen Arteon 2.0 TSI
2.0 TSI 
2021-
310 bhp
AWD
Fits OPF versions

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Possible options for configuring the kit are listed below.

Muffler dimensions:

Can height / width - 180x100 mm
The length of the silencer box - 250/300/350/400/450/500 mm
Inlet diameter - 50/60 / 63.5 / 70/76 mm

The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Satin stainless steel slanted exhaust tip without a clamp with a diffuser.

• Inner intake diameter - 76 mm
• Diameter of the tip - 89 mm 
• Total length of tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
• Tip length - 105 mm

The first photo shows the applied logo on the tip.

Universal silencer based on aluminized construction of the box.

Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 50 mm

The product is not homologated and cannot be approved for use on public roads in the EU.