DIMENSIONS: Length of the box - 650 - 950mm (every 50 mm)
Diameter of the box - 110/120/130/140/150/160 mm
Diameter of the inlet and inner pipe - 50/54/57/60/63,5/70/76 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Muffler dimensions:

Can height / width - 180x100 mm
The length of the silencer box - 250/300/350/400/450/500 mm
Inlet diameter - 50/60 / 63.5 / 70/76 mm

The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

The plow fits:

• CFMoto CForce 2019+
• CForce 800 XC
• CForce 850 XC
• CForce 1000 Overland 2021+

Assembly instructions for plows:  YouTube - SQUDDE 

GPF delete Hyundai Kona N

2.0 T-GDi 
2017-
250, 275 bhp
FWD

Pipe diameter - 76 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

There is a choice of versions:
without silencer or with a silencer.

Downpipe Skoda Superb 2.0 TSI with catalyst 

2.0 TSI 
2020-
310 bhp
AWD
Fits OPF versions

Casting material - stainless steel AISI 316L
Wall thickness - 3 mm

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Possible options for configuring the kit are listed below.

Downpipe Alfa Romeo Giulietta Multiair 1,4T
1,4T 
150, 170 bhp
2008-2019
FWD

Pipe diameter - 76 mm
Diameter at the connection point with the turbo - 70 mm
Diameter at the connection point with the downpipe - 56 mm 

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal passage silencer made of stainless steel.

Inside the muffler, an X-PIPE is used to equalize pressures in the exhaust system

Can height / width - 130x220 mm
Inlet pipe length - 50 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe Abarth 500 / 595 1.4T
1,4T 
164, 177 bhp
2013-2016 
FWD

Pipe diameter - 76 mm
Diameter at the connection point with the turbo - 70 mm
Diameter at the connection point with the downpipe - 56 mm 

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe AUDI RS4 B9, RS5 B9
2,9 TFSI
2018-
450 bhp
Quattro

Inlet diameter - 114 mm 
Outlet diameter - 76 mm 

Possible options for configuring the kit are listed below.

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe BMW G02 X4 20iX, X4 30iX
B48
2018-2021
184 bhp
xDrive

Pipe diameter - 88.9 mm
Diameter of the tube at the point of connection with the center section - 80 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

GPF delete Kia Sportage IV

1.6 T-GDi
2018-2022
177 bhp
AWD/FWD

Pipe diameter - 63.5 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe Volkswagen Arteon 2.0 TSI
2.0 TSI 
2021-
310 bhp
AWD
Fits OPF versions

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Possible options for configuring the kit are listed below.

Downpipe Cupra Ateca
2.0 TSI 
2021-2022
300 bhp
4Drive
Fits OPF versions

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Possible options for configuring the kit are listed below.

Downpipe Decat for AUDI A6 S6 / Avant / Sportback / Avant Quattro 3.0 TDI +EGR plug

3.0 TDI
2016-2021
286 hp
Quattro

Pipe diameter - 76 mm

There is a choice of versions:
without silencer, with a silencer or with catalytic converter

In addition, you can choose a version with or without a heat shield:

The product is not homologated and cannot be approved for use on public roads in the EU.

Polished stainless steel tip with diffuser, choice of with or without clamp.

Intake diameter inside - 50 / 63,5 / 76 mm
Diameter of the tip - 76 / 89 / 101 mm
Total length of the tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
Tip length - 105 mm

Downpipe Cupra Formentor 2.0 TSI
2.0 TSI 
2020-
310 bhp
AWD
Fits OPF versions

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Possible options for configuring the kit are listed below.