Downpipe Cupra Leon ST (Sportstourer) 2.0 TSI with catalyst 

2.0 TSI 
2020-
310 bhp
AWD
Fits OPF versions

Casting material - stainless steel AISI 316L
Wall thickness - 3 mm

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Possible options for configuring the kit are listed below.

Downpipe set for AUDI A7 Sportback 3.0 TDI +heat shield

3.0 TDI
2020-2021
286 hp
Quattro

Pipe diameter - 76 mm

There is a choice of versions:
without silencer, with a silencer or with catalytic converter.

In addition, you can choose a version with or without a heat shield.

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal passage silencer made of stainless steel.

Damper can length - 400 mm
The width / height of the muffler can - 220/130 mm
Tip length - 250 mm
Tip diameter - 89 mm
Inlet pipe diameter - 50, 60, 63.5, 70, 76 mm
The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Satin stainless steel beveled end available with or without clamp.

Intake diameter inside - 50 / 63,5 / 76 mm
Diameter of the tip - 76 / 89 / 101 mm
Total length - 140 mm
Tip length - 105 mm

RM Motors polished stainless steel slanted oval tip with welded diffuser, choice with or without clamp.

Inner intake diameter - 51 / 63.5 mm
Tip width - 100 mm
Tip height - 77 mm
Overall length - 140 mm
Tip length - 105 mm
Bevel angle - 19°

Downpipe AUDI Q5 2.0 TDI
2.0 TDI
2012-2016
143, 150, 177, 190 km
FWD + Quattro
Pipe diameter - 63,5 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal silencer based on aluminized construction of the box.
Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 63 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe Volkswagen Arteon 2.0 TSI
2.0 TSI 
2021-
310 bhp
AWD
Fits OPF versions

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Possible options for configuring the kit are listed below.

Round through silencer

Diameter of silencer - 130 mm
Silencer length - 300 mm
Exhaust tip diameter - 89 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Muffler dimensions: Can height / width - 180x100 mm

The length of the silencer box - 250/300/350/400/450/500 mm
Inlet diameter - 50/60 / 63.5 / 70/76 mm
Outlet diameter - 2x50 mm

The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

The plow fits:

• Can-Am Outlander 1000
• Outlander 6x6 (2013-2016)
• Outlander 6x6 XU+/PRO+/DPS
• Outlander DPS/MAX/
• Outlander 6x6 (2017-2018)
• Outlander 6x6 MAX (2017-2018)
• Outlander G2 (-2016)
• Outlander G2 650/850/1000 (2017-2018)
• Outlander G2 650/850/1000 (2019+)
• Outlander G2 650/850/1000 MAX (2017-2018)
• Outlander G2 650/850/1000 MAX (2019+)
• Outlander G2 MAX (-2016)
• Outlander X MR 1000 (2017-2018)
• Outlander X MR 1000 (2019+)
• Outlander X MR 650/800/850 (-2016)
• Outlander X MR 650/850 (2017-2018)
  
• Outlander 650/800/850/1000 (2012-2023)
  
• Outlander DPS/MAX DPS/ MAX XT/MAX XT-P/ MAX LIMITED
  650/800/850/1000 (2012-2023)

Assembly instructions for plows - YouTube - SQUDDE 

A stainless steel silencer with a built-in damper
Can height / width - 130x220 mm
Valve type - Electric Inlet

Wheel scrapers - Can-Am Maverick X3 XRS designed for wheel size - 14 or 15 inches.
The set includes two scrapers - one for each of the rear wheels.

Stainless steel silencer with integrated damper 
Inlet/outlet diameter - 63,5 mm, 76 mm,
Height x width length of the silencer box - 130x220 mm
Length of the silencer box - 300/400/500 mm

Check also other silencers from our offer.

Fits:

• CF MOTO CFORCE 625 (2020-2024)

Universal passage silencer made of stainless steel.

Can height / width - 130x220 mm
Damper can length - 250, 300, 350, 400, 450, 500 mm
Inlet diameter - 50, 60, 63.5, 70, 76, mm
Inlet pipe length - 50 mm
The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe Cupra Leon ST (Sportstourer) 2.0 TSI with catalyst 

2.0 TSI 
2020-
310 bhp
AWD
Fits OPF versions

Casting material - stainless steel AISI 316L
Wall thickness - 3 mm

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Possible options for configuring the kit are listed below.

Downpipe set for AUDI A7 Sportback 3.0 TDI +heat shield

3.0 TDI
2020-2021
286 hp
Quattro

Pipe diameter - 76 mm

There is a choice of versions:
without silencer, with a silencer or with catalytic converter.

In addition, you can choose a version with or without a heat shield.

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal passage silencer made of stainless steel.

Damper can length - 400 mm
The width / height of the muffler can - 220/130 mm
Tip length - 250 mm
Tip diameter - 89 mm
Inlet pipe diameter - 50, 60, 63.5, 70, 76 mm
The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Satin stainless steel beveled end available with or without clamp.

Intake diameter inside - 50 / 63,5 / 76 mm
Diameter of the tip - 76 / 89 / 101 mm
Total length - 140 mm
Tip length - 105 mm

RM Motors polished stainless steel slanted oval tip with welded diffuser, choice with or without clamp.

Inner intake diameter - 51 / 63.5 mm
Tip width - 100 mm
Tip height - 77 mm
Overall length - 140 mm
Tip length - 105 mm
Bevel angle - 19°