Downpipe AUDI A6 C7
2.0 TFSI
2014-2018
180, 252 bhp
FWD + Quattro
Pipe diameter - 76 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal passage silencer made of stainless steel.
Damper can length - 400 mm
The width / height of the muffler can - 220/130 mm
Length of ends - 150 mm
Tip diameter - 2x63.5 mm
Inlet pipe diameter - 2x50, 50, 63.5, 70, 76 mm
The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe BMW X5 F15 M50d
2013-2018
381 bhp

Pipe diameter - 88,9 mm

Downpipe fits version originally equipped with catalytic converter with EURO 6 standard.

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe Cupra Ateca
2.0 TSI 
2021-2022
300 bhp
4Drive
Fits OPF versions

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Possible options for configuring the kit are listed below.

Downpipe set Volkswagen Golf VIII 2.0 TDI GTD +heat shield

2.0 TDI
2019-
200 hp

Pipe diameter - 76 mm

In addition, you can choose a version with or without a heat shield.

The product is not homologated and cannot be approved for use on public roads in the EU.

RM Motors slanted oval tip in satin stainless steel with welded diffuser, choice with or without clamp.

Inner intake diameter - 51 / 63.5 mm
Tip width - 100 mm
Tip height - 77 mm
Overall length - 140 mm
Tip length - 105 mm
Bevel angle - 19°

Downpipe BMW G31 520i, 530i, 530iX
B48
2.0l
2017-2020
184, 252 bhp
RWD, xDrive

Pipe diameter - 88.9 mm
Pipe diameter at the connection to the center section - 80 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Das Produkt besitzt keine Homologation und darf nicht auf öffentlichen Straßen in der EU verwendet werden.

Downpipe AUDI A6 S6 / Avant / Sportback / Avant Quattro 3.0 TDI +heat shield

3.0 TDI

2019-2021

286 hp
Quattro

Pipe diameter - 76 mm

There is a choice of versions:
without silencer, with a silencer or with catalytic converter.

In addition, you can choose a version with or without a heat shield.

The product is not homologated and cannot be approved for use on public roads in the EU.

Satin stainless steel slanted exhaust tip without a clamp with a diffuser.

• Inner intake diameter - 63 mm
• Diameter of the tip - 89 mm 
• Total length of tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
• Tip length - 105 mm

The first photo shows the applied logo on the tip.

Downpipe fits the original version with catalytic converter with EURO 6 standard.

3.0 l
S58B
2024-
375 km

Pipe diameter - 76 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Men's kangaroo sweatshirt

•     65% cotton, 35% polyester
•     straight cut with side seams
•     hood with lining with drawstring
•     inner back hem reinforced with a colorful strip from the outer material
•     kangaroo pocket
•     bottom hem and sleeve cuffs made of 2:2 rib knit with 5% elastane
•     combed inner side
•     Label: woven

Sizing is understated, we advise you to choose a larger size.

Downpipe Hyundai Veloster N / Kona N 

2.0 T-GDi
2019-
250, 275 bhp
FWD

Pipe diameter from the turbo - 88.9 mm, with a downpipe diameter of 76 mm
Pipe diameter in the second component - 76 mm

The price of the downpipe includes: decat including v-band, flexible connector, GPF delete.

The product is not homologated and cannot be approved for use on public roads in the EU.

Possible options for configuring the kit can be found below:

Universal silencer based on aluminized construction of the box.

Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 63 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal silencer based on aluminized construction of the box.
Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 2x76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 50 mm, 63,5 mm, 2x50 mm  

The product is not homologated and cannot be approved for use on public roads in the EU.