Polished stainless steel slant tip with perforated diffuser, choice of with or without clamp.

Intake diameter inside - 50 / 63,5 / 76 mm
Diameter of the tip - 76 / 89 / 101 mm 
Total length of the tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
Tip length - 105 mm

Complete exhaust system for Skoda Octavia III RS 2.0 TSI

2.0 TSI

2013-2016

220/230 bhp

FWD

Downpipe diameter - 76mm

Exhaust pipe diameter - 63.5 mm

It is also possible to purchase the downpipe itself or the catback system itself.

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal passage silencer made of stainless steel.

Can height / width - 130x220 mm
Damper can length - 250, 300, 350, 400, 450, 500 mm
Inlet diameter - 50, 60, 63.5, 70, 76, mm
Inlet pipe length - 50 mm
The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Catback MINI Cooper S F56 LCI JCW B48D
2022 -
2.0l 
B48D 
231 km
FWD
Fits OPF version


Exhaust pipe diameter - 63.5 mm 2,5" (on closed flap)
Exhaust pipe diameter - 76 mm / 3" (on open flap) 


It is also possible to purchase the downpipe itself or a complete exhaust system.

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal silencer based on aluminized construction of the box.

Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 50 mm, 63,5 mm, 2x50 mm  

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe BMW G02 X4 20iX, X4 30iX
B48
2018-2021
184 bhp
xDrive

Pipe diameter - 88.9 mm
Diameter of the tube at the point of connection with the center section - 80 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe Hyundai i20N with catalyst
1.6 T-GDi
2021-
204 bhp
FWD
Pipe diameter - 76 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Possible options for configuring the kit are listed below.

Satin stainless steel slanted exhaust tip without a clamp with a diffuser.

• Inner intake diameter - 76 mm
• Diameter of the tip - 89 mm 
• Total length of tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
• Tip length - 105 mm

The first photo shows the applied logo on the tip.

Complete RM Motors exhaust system for Seat Leon Cupra mk 3 (hatchback)
2.0 TSI
2013-
300 bhp
FWD

Pipe diameter - 76 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe AUDI A6 C8 Avant Quattro / S6 2.0 TFSI +heat shield

2.0 TFSI 
2019-2021
265 km
Quattro

Pipe diameter - 76 mm

There is a choice of versions:
without silencer, with a silencer or with catalytic converter

In addition, you can choose a version with or without a heat shield:

The product is not homologated and cannot be approved for use on public roads in the EU.

Satin stainless steel slanted exhaust tip without a clamp with a diffuser.

• Inner intake diameter - 50, 63 mm
• Diameter of the tip - 76 mm 
• Total length of tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
• Tip length - 105 mm

The first photo shows the applied logo on the tip.

Downpipe AUDI A8 S8 / Quattro 3.0 TDI +heat shield

3.0 TDI
AUDI A8 S8 D5
2018-2021

AUDI A8 S8 Quattro
2019-2021

286 HP

Pipe diameter - 76 mm

There is a choice of versions:
without silencer, with a silencer or with catalytic converter.

In addition, you can choose a version with or without a heat shield.

The product is not homologated and cannot be approved for use on public roads in the EU.

Polished stainless steel straight tip available with or without clamp.

Intake diameter inside - 50 / 63,5 / 76 mm
Diameter of the tip - 76  / 89 / 101 mm
Total length of the tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
Tip length - 105 mm

Downpipe Audi SQ2 2.0 TFSI with catalyst 

2.0 TSI 
2020-
310 bhp
AWD
Fits OPF versions

Casting material - stainless steel AISI 316L
Wall thickness - 3 mm

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

Possible options for configuring the kit are listed below.

The product is not homologated and cannot be approved for use on public roads in the EU.

Complete RM Motors exhaust system for Seat Leon Cupra 3 (hatchback)
2.0 TSI
2013-
300 bhp
FWD

Pipe diameter - 76 mm

The product is not homologated and cannot be approved for use on public roads in the EU.