E102
Lowest price in the last 30 days
Universal passage silencer made of stainless steel.
Damper can length - 400 mm
The width / height of the muffler can - 220/130 mm
Length of ends - 250 mm
Tip diameter - 2x76 mm
Inlet pipe diameter - 2x50, 50, 60, 63.5, 70, 76 mm
The product is also available in a version with an embossing inside the passage that improves damping.
The product is not homologated and cannot be approved for use on public roads in the EU.
Universal elliptical silencer
- Made entirely of acid resistant steel T304
- Fully welded, hand finished
- Fully manufactured in Poland
- 24 months warranty
The interior of the silencer consists of:
- Stainless steel perforated tube
- Stainless steel wool resistant to 800 degrees Celsius
- Fire resistant glass mat with full hair
- Stamped bottom plate resistant to cracking
Data sheet
Specific References
| Reference | Embossing | Inlet diameter | Price | Add to cart |
|---|---|---|---|---|
PROM.I30N/CATBACK
Catback Hyundai i30N
2.0 T-GDi
2017-2020
250, 275 ps
FWD
The diameter of the pipe for connecting to the original flange - 76 mm.
The outlet diameter of the exhaust tailpipes - 114 mm.
The product is not homologated and cannot be approved for use on public roads in the EU.
E006
Universal passage silencer made of stainless steel.
Can height / width - 130x220 mm
Damper can length - 250, 300, 350, 400, 450, 500 mm
Inlet diameter - 50, 60, 63.5, 70, 76, mm
Inlet pipe length - 50 mm
The product is also available in a version with an embossing inside the passage that improves damping.
The product is not homologated and cannot be approved for use on public roads in the EU.
PROM.220109+220110
Downpipe set for AUDI Q5 3.0 TDI +heat shield
3.0 TDI
2017-2021
286 hp
Pipe diameter - 76 mm
There is a choice of versions:
without silencer, with a silencer or with catalytic converter.
In addition, you can choose a version with or without a heat shield.
The product is not homologated and cannot be approved for use on public roads in the EU.
W/912995
Downpipe made for:
RM217/50
Universal silencer based on aluminized construction of the box.
Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 2x76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 50 mm, 63,5 mm, 2x50 mm
The product is not homologated and cannot be approved for use on public roads in the EU.
PROM.213520C/MS
Downpipe Audi S3 8Y 2.0 TFSI with catalyst
2.0 TFSI
2020-
310 bhp
AWD
Fits OPF versions
Casting material - stainless steel AISI 316L
Wall thickness - 3 mm
Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm
Possible options for configuring the kit are listed below.
The product is not homologated and cannot be approved for use on public roads in the EU.
KOZS
RM Motors oval beveled tip in satin stainless steel, choice with or without clamp.
Inner intake diameter - 51 / 63.5 mm
Tip width - 100 mm
Tip height - 77 mm
Overall length - 140 mm
Tip length - 105 mm
Bevel angle - 19°
PROM.CAYENNE
Downpipe Porsche Cayenne Turbo / Cayenne Turbo S / Cayenne S
V8
3.6l / 4.0 / 4.8l petrol
2015-
400, 500, 520, 550 bhp
4x4
Pipe diameter - 63.5 mm
Diameter of the pipe at the connection with the middle section - 65 mm
TO INSTALL ON A PORSCHE CAYENNE S, USE A 65MM/60MM ADAPTER
Downpipe replaces the second factory catalytic converter existing in the exhaust system (GPF).
The product is not homologated and cannot be approved for use on public roads in the EU.
PROM.213520C/MS
Downpipe Volkswagen Arteon 2.0 TSI with catalyst
2.0 TSI
2020-
310 bhp
AWD
Fits OPF versions
Casting material - stainless steel AISI 316L
Wall thickness - 3 mm
Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm
The product is not homologated and cannot be approved for use on public roads in the EU.
Possible options for configuring the kit are listed below.
RMG7
Banners are printed on one side using CMYK solvent duct technology. Printing is done in 1080 DPI resolution. The banner is welded without wrinkles all around to strengthen the edges (weld width 25-30 mm). The banner is machine welded with galvanized stainless steel eyelets. Coated banner - 510 g/m2. It is characterized by high quality white, and increased durability (1000x1000 fibers). Additional advantage is the matte finish of this banner - does not give light reflections.
The banner is sold separately, without a frame.
KOZS/DP
RM Motors slanted oval tip in satin stainless steel with perforated diffuser
Inner intake diameter - 51 / 63.5 mm
Tip width - 100 mm
Tip height - 77 mm
Overall length - 140 mm
Tip length - 105 mm
Bevel angle - 19°
W/SL/KSZS76/50
Satin stainless steel slanted exhaust tip without a clamp with a diffuser.
The first photo shows the applied logo on the tip.
RM213
Universal silencer based on aluminized construction of the box.
Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 2x76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 50 mm, 63,5 mm, 2x50 mm
The product is not homologated and cannot be approved for use on public roads in the EU.
W/E300/KOMORA
Universal chamber silencer with electric valve
Length of the silencer box - 300 mm
Intake diameter - 63.5 mm
Height/width of the box - 130x220 mm
Length of the outlet pipe - 140 mm
The silencer does not include the control panel in the set.
The muffler is fully operational and ready to use, comes with 24 months warranty.
940103
GPF delete Hyundai i20N
1.6 T-GDi
2021-
204 bhp
FWD
Pipe diameter - 63.5 mm
The product is not homologated and cannot be approved for use on public roads in the EU.
Polski
Deutsch
