E104
Lowest price in the last 30 days
Universal passage silencer made of stainless steel.
Damper can length - 400 mm
The width / height of the muffler can - 220/130 mm
Length of ends - 150 mm
Tip diameter - 2x76mm
Inlet pipe diameter - 2x50, 50, 60, 63.5, 70, 76 mm
The product is also available in a version with an embossing inside the passage that improves damping.
The product is not homologated and cannot be approved for use on public roads in the EU.
Universal elliptical silencer
- Made entirely of acid resistant steel T304
- Fully welded, hand finished
- Fully manufactured in Poland
- 24 months warranty
The interior of the silencer consists of:
- Stainless steel perforated tube
- Stainless steel wool resistant to 800 degrees Celsius
- Fire resistant glass mat with full hair
- Stamped bottom plate resistant to cracking
Data sheet
Specific References
| Reference | Embossing | Inlet diameter | Price | Add to cart |
|---|---|---|---|---|
W/C/KSCS89/63DCS
Satin stainless steel slanted exhaust tip without a clamp with a diffuser.
The first photo shows the applied logo on the tip.
E209-90C
Universal passage silencer made of stainless steel.
Damper can length - 400 mm
The width / height of the muffler can - 220/130 mm
Tip length - 200 mm
Tip diameter - 89 mm
Inlet pipe diameter - 50, 63.5, 70, 76 mm
The product is also available in a version with an embossing inside the passage that improves damping.
The product is not homologated and cannot be approved for use on public roads in the EU.
PROM.220110
Downpipe Decat for AUDI A4 S4 / Avant Quattro / Avant 3.0 TDI
3.0 TDI
2016-2021
286 hp
Quattro
Pipe diameter - 76 mm
There is a choice of versions:
without silencer, with a silencer or with catalytic converter
In addition, you can choose a version with or without a heat shield:
The product is not homologated and cannot be approved for use on public roads in the EU.
912994S
2014-2024
258HP
Pipe diameter: 76mm
The product is not homologated and cannot be approved for use on public roads in the EU.
E005
Can height / width – 130×220 mm
Damper can length – 300, 350, 400, 450, 500 mm
Inlet diameter – 50, 60, 63.5, 70, 76, mm
Inlet pipe length – 50 mm
Outlet diameter – 2×50 mm
The product is also available in a version with an embossing inside the passage that improves damping.
The product is not homologated and cannot be approved for use on public roads in the EU.
PROM.SKR/14
Wheel scrapers - Can-Am Maverick X3 XRS designed for wheel size - 14 or 15 inches.
The set includes two scrapers - one for each of the rear wheels.
KPCS
Satin stainless steel straight tip available with or without clamp.
Intake diameter inside - 50 / 63,5 / 76 mm
Diameter of the tip - 76 / 89 / 101 mm
Total length of the tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
Tip length - 105 mm
PROM.I30N
Downpipe Hyundai i30N
choice of version with or without center silencer
2.0 T-GDi
2017-2021
250, 275 bhp
FWD
Pipe diameter from the turbo - 88.9 mm, with a downpipe diameter of 76 mm
Pipe diameter in the second component - 76 mm
The price of the downpipe includes: decat including v-band, flexible connector, GPF delete.
The product is not homologated and cannot be approved for use on public roads in the EU.
Possible options for configuring the kit can be found below:
PROM.I30N/LIFT
Catback Hyundai i30N 2.0 T-GDi Facelift
2.0 T-GDi
2021-
280 bhp
FWD
Hatchback
The diameter of the pipe for connecting to the original flange - 76 mm.
The outlet diameter of the exhaust tailpipes - 114 mm.
The product is not homologated and cannot be approved for use on public roads in the EU.
KOZS
RM Motors oval beveled tip in satin stainless steel, choice with or without clamp.
Inner intake diameter - 51 / 63.5 mm
Tip width - 100 mm
Tip height - 77 mm
Overall length - 140 mm
Tip length - 105 mm
Bevel angle - 19°
E101
Universal passage silencer made of stainless steel.
Damper can length - 400 mm
The width / height of the muffler can - 220/130 mm
Length of ends - 220 mm
Tip diameter - 2x76 mm
Inlet pipe diameter - 2x50, 50, 60, 63.5, 70, 76 mm
The product is also available in a version with an embossing inside the passage that improves damping.
The product is not homologated and cannot be approved for use on public roads in the EU.
RM110
Universal silencer based on aluminized construction of the box.
Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 50 mm, 63,5 mm, 2x50 mm
The product is not homologated and cannot be approved for use on public roads in the EU.
KSZP
Polished stainless steel tip available with or without clamp.
Intake diameter inside - 50 / 63,5 / 76 mm
Diameter of the tip - 76 / 89 / 101 mm
Total length of the tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
Tip length - 105 mm
E004
Can height / width – 130×220 mm
Damper can length – 300, 350, 400, 450, 500 mm
Inlet diameter – 50, 60, 63.5, 70, 76, mm
Inlet pipe length – 50 mm
Outlet diameter – 2×50 mm
The product is also available in a version with an embossing inside the passage that improves damping.
The product is not homologated and cannot be approved for use on public roads in the EU.
VOUCHER
Not sure what to choose for a gift? Having trouble choosing among the many options available?
Not sure if your choice will appeal to the recipient? No need to worry, we have the perfect solution for you.
Choose our gift card. It's a simple yet elegant way to make a unique gift.
Each card has a unique number and can be redeemed only once.
940109
GPF delete Hyundai i30N
2.0 T-GDi
2017-
250, 275 bhp
FWD
(GPF delete also fits after lifting version from 2021)
Pipe diameter - 76 mm
The product is not homologated and cannot be approved for use on public roads in the EU.
There is a choice of versions:
without silencer or with a silencer.
Polski
36 rat x ~29 zł
