Sport straight through silencer made of acid-resistant steel
Can length - 300/400/480 mm
Can diameter - 88.9 mm
Inlet / passage diameter - 50/57/63.5 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Men's T-shirt

Size is understated, we advise you to choose a larger size.

Downpipe Volkswagen Arteon 2.0 TSI with catalyst 

2.0 TSI 
2020-
310 bhp
AWD
Fits OPF versions

Casting material - stainless steel AISI 316L
Wall thickness - 3 mm

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Possible options for configuring the kit are listed below.

Downpipe Decat for AUDI A4 S4 / Avant Quattro / Avant 3.0 TDI

3.0 TDI
2016-2021
286 hp
Quattro

Pipe diameter - 76 mm

There is a choice of versions:
without silencer, with a silencer or with catalytic converter

In addition, you can choose a version with or without a heat shield:

The product is not homologated and cannot be approved for use on public roads in the EU.

KOMPLET 2 BAGAŻNIKÓW PRZÓD LONCIN XWOLF 1000 2025

Polished stainless steel straight tip available with or without clamp.

Intake diameter inside - 50 / 63,5 / 76 mm
Diameter of the tip - 76  / 89 / 101 mm
Total length of the tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
Tip length - 105 mm

KOMPLET 2 BAGAŻNIKÓW TYŁ ODES 850/1000 2025

Satin stainless steel slanted exhaust tip without a clamp with a diffuser of the flared diffuser.

• Inner intake diameter - 50 mm, 63 mm
• Diameter of the tip - 89 mm, 101 mm 
• Total length of tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
• Tip length - 105 mm

The first photo shows the applied logo on the tip.

Muffler dimensions:

Can height / width - 180x100 mm
The length of the silencer box - 250/300/350/400/450/500 mm
Inlet diameter - 50/60 / 63.5 / 70/76 mm

The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

A stainless steel silencer with a built-in damper
Can height / width - 130x220 mm
Valve type - Electric Inlet

Straight-through transverse silencer with electric valve.

Height/width of the box - 130x220 mm
Length of the silencer box - 350 mm
Total length - 570 mm
Intake/outlet diameter - 76 mm 

Valve type - Electric
Side - Left / Right

It is possible to select the appropriate tips:
For 76 mm diameter muffler - LINK

Downpipe SUBARU Impreza Mk3 2.5 WRX STI
2.5
2008-2014
300 bhp
AWD

The product is not homologated and cannot be approved for use on public roads in the EU.

Polished stainless steel slanted exhaust tip without a clamp with a diffuser.

• Inner intake diameter - 76 mm
• Diameter of the tip - 89 mm 
• Total length of tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
• Tip length - 105 mm

The first photo shows the applied logo on the tip.

Banners are printed on one side using CMYK solvent duct technology. Printing is done in 1080 DPI resolution. The banner is welded without wrinkles all around to strengthen the edges (weld width 25-30 mm). The banner is machine welded with galvanized stainless steel eyelets. Coated banner - 510 g/m2. It is characterized by high quality white, and increased durability (1000x1000 fibers). Additional advantage is the matte finish of this banner - does not give light reflections.
The banner is sold separately, without a frame.

Downpipe BMW G31 520i, 530i, 530iX
B48
2.0l
2017-2020
184, 252 bhp
RWD, xDrive

Pipe diameter - 88.9 mm
Pipe diameter at the connection to the center section - 80 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Das Produkt besitzt keine Homologation und darf nicht auf öffentlichen Straßen in der EU verwendet werden.