Banners are printed on one side using CMYK solvent duct technology. Printing is done in 1080 DPI resolution. The banner is welded without wrinkles all around to strengthen the edges (weld width 25-30 mm). The banner is machine welded with galvanized stainless steel eyelets. Coated banner - 510 g/m2. It is characterized by high quality white, and increased durability (1000x1000 fibers). Additional advantage is the matte finish of this banner - does not give light reflections.
The banner is sold separately, without a frame.

Universal passage silencer made of stainless steel.

Can height / width – 130×220 mm
Damper can length – 250, 300, 350, 400, 450, 500 mm
Inlet diameter – 50, 60, 63.5, 70, 76, mm
Inlet pipe length – 50 mm
The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe Audi SQ2 2.0 TFSI with catalyst 

2.0 TSI 
2020-
310 bhp
AWD
Fits OPF versions

Casting material - stainless steel AISI 316L
Wall thickness - 3 mm

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

Possible options for configuring the kit are listed below.

The product is not homologated and cannot be approved for use on public roads in the EU.

Satin stainless steel slanted exhaust tip without a clamp with a diffuser.

• Inner intake diameter - 50mm, 63 mm, 76 mm
• Diameter of the tip - 76 mm, 89 mm
• Total length of tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
• Tip length - 105 mm

The first photo shows the applied logo on the tip.

Downpipe Cupra Ateca
2.0 TSI 
2021-2022
300 bhp
4Drive
Fits OPF versions

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Possible options for configuring the kit are listed below.

Universal silencer based on aluminized construction of the box.

Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 50 mm, 63,5 mm, 2x50 mm  

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe AUDI A5 S5 / Cabriolet / Sportback / Coupe 3.0 TDI +heat shield

3.0 TDI

AUDI A5 S5 / Cabriolet
2018-2021

AUDI A5 S5 / Sportback / Coupe
2017-2021

286 hp
Quattro

Pipe diameter - 76 mm

There is a choice of versions:
without silencer, with a silencer or with catalytic converter.

In addition, you can choose a version with or without a heat shield.

The product is not homologated and cannot be approved for use on public roads in the EU.

Porsche Macan S 3.0 TDI downpipe with catalytic converter.

2014-2024

258HP

Pipe diameter: 76mm

The product is available with three catalytic converter variants:

• MS - a motorsport catalytic converter with a 100cpsi flow rate, FIA homologated
• OBD - a catalytic converter with a 200cpsi flow rate, compliant with emission standards for OBD
• EURO 6 - a catalytic converter with a 200cpsi flow rate, compliant with Euro 6 emission standards

The product is not homologated and cannot be approved for use on public roads in the EU.

Fits:

• CF MOTO CFORCE 850/1000 - production year 2024

Downpipe TOYOTA Yaris GR 1.6
1,6
2020-2023
261 km
AWD
Downpipe diameter - 76 mm

The kit does not include mounting screws and gaskets.

NOT COMPATIBLE WITH THE POST-LIFT VERSION.

It is possible to buy another part of the system - CATBACK TOYOTA YARIS GR

The product is not homologated and cannot be approved for use on public roads in the EU.

All possible downpipe configuration options can be found below.

Downpipe Abarth 500 / 595 1.4T with catalytic converter
EURO 4 emission standard 
1,4T 
164, 177 bhp
2013-2016 
FWD

Pipe diameter - 76 mm 
Diameter at the connection point with the turbo - 70 mm
Diameter at the point of connection with the rest of the system - 56 mm 

Below it is possible to choose the appropriate catalyst capacity - 100 or 200 cpsi

The product is not homologated and cannot be approved for use on public roads in the EU.

Muffler dimensions:

Can height / width - 180x100 mm
The length of the silencer box - 250/300/350/400/450/500 mm
Inlet diameter - 50 / 60 / 63.5 / 70 mm

The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe Volkswagen Golf VIII R with catalyst 

2.0 TSI 
2020-
310 bhp
AWD
Fits OPF versions

Casting material - stainless steel AISI 316L
Wall thickness - 3 mm

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Possible options for configuring the kit are listed below.

Complete exhaust system for Skoda Octavia III RS 2.0 TSI

2.0 TSI

2013-2016

220/230 bhp

FWD

Downpipe diameter - 76mm

Exhaust pipe diameter - 63.5 mm

It is also possible to purchase the downpipe itself or the catback system itself.

The product is not homologated and cannot be approved for use on public roads in the EU.

GPF delete Hyundai Tucson IV 

1.6 T-GDi 
2020-
150 bhp
FWD

Pipe diameter - 63.5 mm

The product is not homologated and cannot be approved for use on public roads in the EU.


Below you can choose a version with or without a silencer:

Polished stainless steel tip available with or without clamp.

Intake diameter inside - 50 / 63,5 / 76 mm
Diameter of the tip - 76  / 89 / 101 mm
Total length of the tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
Tip length - 105 mm