Children's T-Shirt - RM Motors

• Material: 100% cotton 
• Weight: 320 gsm
• For height: 104, 116, 140, 152 cm
• Label: woven
• Color: black
• Garment marking method: thermal transfer

Muffler dimensions: Can height / width - 180x100 mm

The length of the silencer box - 250/300/350/400/450/500 mm
Inlet diameter - 50/60 / 63.5 / 70/76 mm
Outlet diameter - 2x50 mm

The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe Volkswagen Golf VIII R 2.0 TSI
2.0 TSI 
2020-
320 bhp
AWD
Fits OPF versions

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Possible options for configuring the kit are listed below.

RM Motors oval beveled tip in satin stainless steel, choice with or without clamp.

Inner intake diameter - 51 / 63.5 mm
Tip width - 100 mm
Tip height - 77 mm
Overall length - 140 mm
Tip length - 105 mm
Bevel angle - 19°

RM Motors Cap 

Available sizes are listed below:

RM Motors zip-up hoodie

•     80% ring-spun cotton; 20% polyester
•     simpler cut for a modern look
•     double-layer hood with a covered seam drawstring tunnel
•     covered seam on shoulders, cuffs, and hem
•     flat, wide ribbed cuffs with buttonholes
•     headphone access
•     fabric weight: 280 gsm

Available sizes: S-XL.

Wheel scrapers - Can-Am Maverick X3 XRS designed for wheel size - 14 or 15 inches.
The set includes two scrapers - one for each of the rear wheels.

Stainless steel pipe connector with a diameter of 50/63.5/76 mm 

Used to connect pipes of the same diameter in a straight section.
The tension springs used eliminate the welding process and make installation a lot easier.

Length of the connector with a diameter of 63.5/76 mm - 250 mm
Length of connector with a diameter of 50 mm - 260 mm

Downpipe BMW G30 520i, G30 530iX
B48
2.0l 
2017-2020
184 bhp
RWD

Średnica rury - 88,9 mm
Średnica rury w miejscu łączenia z sekcją środkową - 80 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe Cupra Ateca
2.0 TSI 
2021-2022
300 bhp
4Drive
Fits OPF versions

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Possible options for configuring the kit are listed below.

Straight-through transverse silencer with electric valve.

Height/width of the box - 130x220 mm
Length of the silencer box - 350 mm
Total length - 570 mm
Intake/outlet diameter - 76 mm 

Valve type - Electric
Side - Left / Right

It is possible to select the appropriate tips:
For 76 mm diameter muffler - LINK

Polished stainless steel slant tip with perforated diffuser, choice of with or without clamp.

Intake diameter inside - 50 / 63,5 / 76 mm
Diameter of the tip - 76 / 89 / 101 mm 
Total length of the tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
Tip length - 105 mm

Universal passage silencer made of stainless steel.

Can height / width - 130x220 mm
Damper can length - 250, 300, 350, 400, 450, 500 mm
Inlet diameter - 50, 60, 63.5, 70, 76, mm
Inlet pipe length - 50 mm

The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Alfa Romeo Mito downpipe with catalytic converter
EURO 4 emission standard 
1,4T 
135, 170 km
2009-2018 
FWD

Pipe diameter - 76 mm 
Diameter at the connection point with the turbo - 70 mm
Diameter at the point of connection with the rest of the system - 56 mm 

Below it is possible to choose the appropriate catalyst capacity - 100 or 200 cpsi

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal passage silencer made of stainless steel.

Damper can length - 400 mm
The width / height of the muffler can - 220/130 mm
Length of ends - 250 mm
Tip diameter - 2x76 mm
Inlet pipe diameter - 2x50, 50, 60, 63.5, 70, 76 mm

The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal passage silencer made of stainless steel.

Can height / width - 130x220 mm
Damper can length - 250, 300, 350, 400, 450, 500 mm
Inlet diameter - 50, 60, 63.5, 70, 76, mm
Inlet pipe length - 50 mm
The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Children's T-Shirt - RM Motors

• Material: 100% cotton 
• Weight: 320 gsm
• For height: 104, 116, 140, 152 cm
• Label: woven
• Color: black
• Garment marking method: thermal transfer

Muffler dimensions: Can height / width - 180x100 mm

The length of the silencer box - 250/300/350/400/450/500 mm
Inlet diameter - 50/60 / 63.5 / 70/76 mm
Outlet diameter - 2x50 mm

The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe Volkswagen Golf VIII R 2.0 TSI
2.0 TSI 
2020-
320 bhp
AWD
Fits OPF versions

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Possible options for configuring the kit are listed below.

RM Motors oval beveled tip in satin stainless steel, choice with or without clamp.

Inner intake diameter - 51 / 63.5 mm
Tip width - 100 mm
Tip height - 77 mm
Overall length - 140 mm
Tip length - 105 mm
Bevel angle - 19°

RM Motors Cap 

Available sizes are listed below: