EM004
Lowest price in the last 30 days
Muffler dimensions: Can height / width - 180x100 mm
The length of the silencer box - 250/300/350/400/450/500 mm
Inlet diameter - 50/60 / 63.5 / 70/76 mm
Outlet diameter - 2x50 mm
The product is also available in a version with an embossing inside the passage that improves damping.
The product is not homologated and cannot be approved for use on public roads in the EU.
Universal elliptical silencer
The interior of the silencer consists of:
Specific References
| Reference | Can length | Embossing | Inlet diameter | Price | Add to cart |
|---|---|---|---|---|---|
PROM.I30N/LIFT
Catback Hyundai i30N 2.0 T-GDi Facelift
2.0 T-GDi
2021-
280 bhp
FWD
Hatchback
The diameter of the pipe for connecting to the original flange - 76 mm.
The outlet diameter of the exhaust tailpipes - 114 mm.
The product is not homologated and cannot be approved for use on public roads in the EU.
220108
Downpipe AUDI A7 SPORTBACK 2.0 TFSI +heat shield
2.0 TFSI
2020-2021
245 km
Quattro
Pipe diameter - 76 mm
There is a choice of versions:
without silencer, with a silencer or with catalytic converter
In addition, you can choose a version with or without a heat shield:
The product is not homologated and cannot be approved for use on public roads in the EU.
E110
Universal passage silencer made of stainless steel.
Damper can length - 400 mm
The width / height of the muffler can - 220/130 mm
Length of ends - 250 mm
Tip diameter - 2x76 mm
Inlet pipe diameter - 2x50, 50, 60, 63.5, 70, 76 mm
The product is also available in a version with an embossing inside the passage that improves damping.
The product is not homologated and cannot be approved for use on public roads in the EU.
PROM.CATBACK-MINI
Catback MINI Cooper S F56 LCI JCW B48D
2022 -
2.0l
B48D
231 km
FWD
Fits OPF version
Exhaust pipe diameter - 63.5 mm 2,5" (on closed flap)
Exhaust pipe diameter - 76 mm / 3" (on open flap)
It is also possible to purchase the downpipe itself or a complete exhaust system.
The product is not homologated and cannot be approved for use on public roads in the EU.
PROM.112137+112138+112139
F152
F152 flange
Flange connecting the downpipe to the turbine.
Internal diameter - 155.3 mm
Fits the following models:
AUDI S4 B9, S5 8W6 with symbol 214111C
PROM.213520+213521
Downpipe Cupra Formentor 2.0 TSI
2.0 TSI
2021-2022
310 bhp
4Drive
Fits OPF versions
Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm
The product is not homologated and cannot be approved for use on public roads in the EU.
Possible options for configuring the kit are listed below.
KOZP/DP
RM Motors polished stainless steel beveled oval tip, choice with or without clamp.
Inner intake diameter - 51 / 63.5 mm
Tip width - 100 mm
Tip height - 77 mm
Overall length - 140 mm
Tip length - 105 mm
Bevel angle - 19°
KSCP/DS
Polished stainless steel oblique tip with welded diffuser, choice of with or without clamp.
Intake diameter inside - 50 / 63,5 / 76 mm
Diameter of the tip - 76 / 89 / 101 mm
Total length of the tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
Tip length - 105 mm
E012
A stainless steel silencer ideal for use with a throttle
Can height / width - 130x220 mm
PROM.220110
Downpipe Decat for AUDI A5 S5 / Cabriolet / Sportback / Coupe 3.0 TDI +EGR plug
3.0 TDI
AUDI A5 S5 / Cabriolet
2018-2021
AUDI A5 S5 / Sportback / Coupe
2017-2021
286 KM
Quattro
Pipe diameter - 76 mm
There is a choice of versions:
without silencer, with a silencer or with catalytic converter
In addition, you can choose a version with or without a heat shield:
The product is not homologated and cannot be approved for use on public roads in the EU.
112128
Downpipe BMW G20 G21
330i, 330e, 330i, 330e, 330eX, 530e, 530eX
2018--
255 bhp
The product is not homologated and cannot be approved for use on public roads in the EU.
RMG9
Banners are printed on one side using CMYK solvent duct technology. Printing is done in 1080 DPI resolution. The banner is welded without wrinkles all around to strengthen the edges (weld width 25-30 mm). The banner is machine welded with galvanized stainless steel eyelets. Coated banner - 510 g/m2. It is characterized by high quality white, and increased durability (1000x1000 fibers). Additional advantage is the matte finish of this banner - does not give light reflections.
The banner is sold separately, without a frame.
E209-90C
Universal passage silencer made of stainless steel.
Damper can length - 400 mm
The width / height of the muffler can - 220/130 mm
Tip length - 200 mm
Tip diameter - 89 mm
Inlet pipe diameter - 50, 63.5, 70, 76 mm
The product is also available in a version with an embossing inside the passage that improves damping.
The product is not homologated and cannot be approved for use on public roads in the EU.
601101C/E4/100
Downpipe Abarth 695 1.4T
EURO 4 emission standard
1,4T
162, 177 bhp
2009-2017
FWD
Pipe diameter - 76 mm
Diameter at the connection point with the turbo - 70 mm
Diameter at the point of connection with the rest of the system - 56 mm
Below it is possible to choose the appropriate catalyst capacity - 100 or 200 cpsi
The product is not homologated and cannot be approved for use on public roads in the EU.
Polski
36 rat x ~14 zł
