Universal passage silencer made of stainless steel.

Can height / width – 130×220 mm
Damper can length – 250, 300, 350, 400, 450, 500 mm
Inlet diameter – 50, 60, 63.5, 70, 76, mm
Inlet pipe length – 50 mm
The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

CF MOTO CFORCE FRONT BUMPER WITH BLACK CORNERS MADE OUT OF STEEL

Fits:

• CF MOTO CFORCE 850
• CF MOTO CFORCE 1000

Chamber Silencer with Electric Valve EV05
Box height/width - 130x220 mm
Valve type - Electric

Length of the muffler box - 300 mm / 350 mm
Intake/exhaust diameter - 63.5 mm or 76 mm

It is possible to select the appropriate tips for the silencer - LINK

Straight-through transverse silencer with electric valve.

Height/width of the box - 130x220 mm
Length of the silencer box - 350 mm
Total length - 570 mm
Intake/outlet diameter - 76 mm 

Valve type - Electric
Side - Left / Right

It is possible to select the appropriate tips:
For 76 mm diameter muffler - LINK

Universal passage silencer made of stainless steel.

Damper can length - 400 mm
The width / height of the muffler can - 220/130 mm
Tip length - 250 mm
Tip diameter - 76 mm
Inlet pipe diameter - 50, 60, 63.5, 70, 76 mm
The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe Volkswagen Tiguan II R 2.0 TSI
2.0 TSI 
2021-
320 bhp
AWD
Fits OPF versions

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Possible options for configuring the kit are listed below.

Universal silencer based on aluminized construction of the box.

Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 2x50 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Stainless steel pipe connector with a diameter of 50/63.5/76 mm 

Used to connect pipes of the same diameter in a straight section.
The tension springs used eliminate the welding process and make installation a lot easier.

Length of the connector with a diameter of 63.5/76 mm - 250 mm
Length of connector with a diameter of 50 mm - 260 mm

GPF delete Hyundai i30N

2.0 T-GDi 
2017-
250, 275 bhp
FWD

(GPF delete also fits after lifting version from 2021)

Pipe diameter - 76 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

There is a choice of versions:
without silencer or with a silencer.

Universal silencer based on aluminized construction of the box.

Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 2x76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 50 mm, 63,5 mm, 2x50 mm  

The product is not homologated and cannot be approved for use on public roads in the EU.

GPF delete Kia Sportage IV

1.6 T-GDi
2018-2022
177 bhp
AWD/FWD

Pipe diameter - 63.5 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Satin stainless steel slanted exhaust tip without a clamp with a diffuser.

• Inner intake diameter - 63 mm
• Diameter of the tip - 89 mm 
• Total length of tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
• Tip length - 105 mm

The first photo shows the applied logo on the tip.

Muffler dimensions:

Can height / width - 180x100 mm
The length of the silencer box - 250/300/350/400/450/500 mm
Inlet diameter - 50 / 60 / 63.5 / 70 mm

The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Fits:

• CF MOTO CFORCE 850/1000 - production year 2024

Downpipe Jeep Renegade 1.4T 
1,4T 
170 bhp
2015-2018
FWD

Pipe diameter - 76 mm
Diameter at the connection point with the turbo - 70 mm
Diameter at the connection point with the downpipe - 56 mm 

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe AUDI Q5 3.0 TDI +heat shield

3.0 TDI
2017-2021
286 hp

Pipe diameter - 76 mm

There is a choice of versions:
without silencer, with a silencer or with catalytic converter

In addition, you can choose a version with or without a heat shield:

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal passage silencer made of stainless steel.

Can height / width – 130×220 mm
Damper can length – 250, 300, 350, 400, 450, 500 mm
Inlet diameter – 50, 60, 63.5, 70, 76, mm
Inlet pipe length – 50 mm
The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

CF MOTO CFORCE FRONT BUMPER WITH BLACK CORNERS MADE OUT OF STEEL

Fits:

• CF MOTO CFORCE 850
• CF MOTO CFORCE 1000

Chamber Silencer with Electric Valve EV05
Box height/width - 130x220 mm
Valve type - Electric

Length of the muffler box - 300 mm / 350 mm
Intake/exhaust diameter - 63.5 mm or 76 mm

It is possible to select the appropriate tips for the silencer - LINK

Straight-through transverse silencer with electric valve.

Height/width of the box - 130x220 mm
Length of the silencer box - 350 mm
Total length - 570 mm
Intake/outlet diameter - 76 mm 

Valve type - Electric
Side - Left / Right

It is possible to select the appropriate tips:
For 76 mm diameter muffler - LINK

Universal passage silencer made of stainless steel.

Damper can length - 400 mm
The width / height of the muffler can - 220/130 mm
Tip length - 250 mm
Tip diameter - 76 mm
Inlet pipe diameter - 50, 60, 63.5, 70, 76 mm
The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.