Downpipe AUDI A7 SPORTBACK 2.0 TFSI +heat shield

2.0 TFSI 
2020-2021
245 km
Quattro

Pipe diameter - 76 mm

There is a choice of versions:
without silencer, with a silencer or with catalytic converter

In addition, you can choose a version with or without a heat shield:

The product is not homologated and cannot be approved for use on public roads in the EU.

Satin stainless steel straight tip with perforated diffuser available with or without clamp.

Intake diameter inside - 50 / 63,5 / 76 mm
Diameter of the tip - 76 / 89 / 101 mm 
Total length - 140 mm
Tip length - 105 mm

Downpipe Decat for AUDI A7 Sportback 3.0 TDI +EGR plug

3.0 TDI
2020-2021
286 hp
Quattro

Pipe diameter - 76 mm

There is a choice of versions:
without silencer, with a silencer or with catalytic converter

In addition, you can choose a version with or without a heat shield:

The product is not homologated and cannot be approved for use on public roads in the EU.

Complete RM Motors exhaust system for Volskwagen Golf VII 7 GTI
2.0 TSI
2013-2019
220, 230, 265 bhp
FWD

Downpipe diameter - 76mm
Exhaust pipe diameter - 63.5 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe set for AUDI Q5 3.0 TDI +heat shield

3.0 TDI
2017-2021
286 hp

Pipe diameter - 76 mm

There is a choice of versions:
without silencer, with a silencer or with catalytic converter.

In addition, you can choose a version with or without a heat shield.

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe Cupra Formentor 2.0 TSI

2.0 TSI 
2021-2022
310 bhp
4Drive

Fits OPF versions

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Possible options for configuring the kit are listed below.

Catback - Jeep Grand Cherokee V6 3.6L, V8 5.7L

2014-2021

V6 3.6L/V8 5.7L

286/352 bhp

Automatic

4x4

Exhaust pipe diameter - 63.5 mm 

Tip diameter - 63.5 mm inlet / 114 mm outlet

Below you can choose an end silencer with or without a valve and select the appropriate tips.

The product is not homologated and cannot be approved for use on public roads in the EU.

The plow fits:

• CF MOTO 850/1000 - G3 production year 2024+ 

Assembly instructions for plows: YouTube - SQUDDE

Universal passage silencer made of stainless steel.

Damper can length - 400 mm
The width / height of the muffler can - 220/130 mm
Tip length - 200 mm
Tip diameter - 89 mm
Inlet pipe diameter - 50, 63.5, 70, 76 mm
The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Satin stainless steel slanted exhaust tip without a clamp with a diffuser.

• Inner intake diameter - 63, 76 mm
• Diameter of the tip - 89, 101 mm 
• Total length of tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
• Tip length - 105 mm

The first photo shows the applied logo on the tip.

Universal passage silencer made of stainless steel.
Damper can length - 400 mm
The width / height of the muffler can - 220/130 mm
Length of ends - 250 mm
Tip diameter - 2x89 mm
Inlet pipe diameter - 2x50, 50, 63.5, 70, 76 mm
The product is also available in a version with an embossing inside the passage that improves damping.

Mazda MX5 (ND)
2014-2019
Convertible/Coupe
1.5, 2.0l
131, 132, 160, 184 bhp
RWD

Conical through silencer made of acid-resistant steel
Can length -  240 mm
Diameter of the can - 110 mm
Diameter of inlet/outlet - 63,5 mm

Universal passage silencer made of stainless steel.

Can height / width - 130x220 mm
Damper can length - 250, 300, 350, 400, 450, 500 mm
Inlet diameter - 50, 60, 63.5, 70, 76, mm
Inlet pipe length - 50 mm
The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Front bumper with steel corners in red.

Fits:

• CF MOTO 520 2023+

Satin stainless steel tip available with or without clamp.

Intake diameter inside - 50 / 63,5 / 76 mm
Diameter of the tip - 76 / 89 / 101 mm 
Total length of the tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
Tip length - 105 mm

Downpipe AUDI A7 SPORTBACK 2.0 TFSI +heat shield

2.0 TFSI 
2020-2021
245 km
Quattro

Pipe diameter - 76 mm

There is a choice of versions:
without silencer, with a silencer or with catalytic converter

In addition, you can choose a version with or without a heat shield:

The product is not homologated and cannot be approved for use on public roads in the EU.

Satin stainless steel straight tip with perforated diffuser available with or without clamp.

Intake diameter inside - 50 / 63,5 / 76 mm
Diameter of the tip - 76 / 89 / 101 mm 
Total length - 140 mm
Tip length - 105 mm

Downpipe Decat for AUDI A7 Sportback 3.0 TDI +EGR plug

3.0 TDI
2020-2021
286 hp
Quattro

Pipe diameter - 76 mm

There is a choice of versions:
without silencer, with a silencer or with catalytic converter

In addition, you can choose a version with or without a heat shield:

The product is not homologated and cannot be approved for use on public roads in the EU.

Complete RM Motors exhaust system for Volskwagen Golf VII 7 GTI
2.0 TSI
2013-2019
220, 230, 265 bhp
FWD

Downpipe diameter - 76mm
Exhaust pipe diameter - 63.5 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe set for AUDI Q5 3.0 TDI +heat shield

3.0 TDI
2017-2021
286 hp

Pipe diameter - 76 mm

There is a choice of versions:
without silencer, with a silencer or with catalytic converter.

In addition, you can choose a version with or without a heat shield.

The product is not homologated and cannot be approved for use on public roads in the EU.