Satin stainless steel slanted exhaust tip without a clamp with a diffuser.

• Inner intake diameter - 76 mm
• Diameter of the tip - 89 mm 
• Total length of tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
• Tip length - 105 mm

The first photo shows the applied logo on the tip.

Universal passage silencer made of stainless steel.
Damper can length - 400 mm
The width / height of the muffler can - 220/130 mm
Length of ends - 150 mm
Tip diameter - 2x63.5 mm
Inlet pipe diameter - 2x50, 50, 63.5, 70, 76 mm
The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe made for:

• Porsche Macan 2.0 TFSI
• Audi A4 (B8) 2.0 TFSI
• Audi Q5 (8RB) 2.0 TFSI

Catback Hyundai i30N

2.0 T-GDi
2017-2020
250, 275 ps
FWD

The diameter of the pipe for connecting to the original flange - 76 mm.
The outlet diameter of the exhaust tailpipes - 114 mm.

The product is not homologated and cannot be approved for use on public roads in the EU.

Can Am Maverick X3
Downpipe diameter - 63.5 mm

Downpipe fits X3, X RC TURBO RR, X3 Turbo R X RS versions.

The product is not homologated and cannot be approved for use on public roads in the EU.

See below for configuration options: 

Banners are printed on one side using CMYK solvent duct technology. Printing is done in 1080 DPI resolution. The banner is welded without wrinkles all around to strengthen the edges (weld width 25-30 mm). The banner is machine welded with galvanized stainless steel eyelets. Coated banner - 510 g/m2. It is characterized by high quality white, and increased durability (1000x1000 fibers). Additional advantage is the matte finish of this banner - does not give light reflections.
The banner is sold separately, without a frame.

The plow fits:

• CFMoto CForce 2019+
• CForce 800 XC
• CForce 850 XC
• CForce 1000 Overland 2021+

Assembly instructions for plows:  YouTube - SQUDDE 

Downpipe BMW G31 520i, 530i, 530iX
B48
2.0l
2017-2020
184, 252 bhp
RWD, xDrive

Pipe diameter - 88.9 mm
Pipe diameter at the connection to the center section - 80 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Das Produkt besitzt keine Homologation und darf nicht auf öffentlichen Straßen in der EU verwendet werden.

Downpipe set for AUDI A4 S4 / Avant Quattro / Avant 3.0 TDI +heat shield

3.0 TDI
2016-2021
286 hp
Quattro

Pipe diameter - 76 mm

There is a choice of versions:
without silencer, with a silencer or with catalytic converter.

In addition, you can choose a version with or without a heat shield.

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal silencer based on aluminized construction of the box.

Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 2x76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 50 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe Porsche Cayenne Turbo / Cayenne Turbo S / Cayenne S
V8
3.6l / 4.0 / 4.8l petrol
2015-
400, 500, 520, 550 bhp
4x4

Pipe diameter - 63.5 mm
Diameter of the pipe at the connection with the middle section - 65 mm

TO INSTALL ON A PORSCHE CAYENNE S, USE A 65MM/60MM ADAPTER

Downpipe replaces the second factory catalytic converter existing in the exhaust system (GPF).

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal silencer based on aluminized construction of the box.

Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 2x76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 50 mm, 63,5 mm, 2x50 mm  

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe AUDI A4 Avant Quattro / S4 2.0 TFSI +heat shield

2.0 TFSI 
2016-2021
245 km
Quattro

Pipe diameter - 76 mm

There is a choice of versions:
without silencer, with a silencer or with catalytic converter

In addition, you can choose a version with or without a heat shield:

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe Decat for AUDI A4 S4 / Avant Quattro / Avant 3.0 TDI

3.0 TDI
2016-2021
286 hp
Quattro

Pipe diameter - 76 mm

There is a choice of versions:
without silencer, with a silencer or with catalytic converter

In addition, you can choose a version with or without a heat shield:

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal silencer based on aluminized construction of the box.
Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 2X50 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe Cupra Ateca 2.0 TSI 4Drive with catalyst 

2.0 TSI 
2020-
310 bhp
AWD
Fits OPF versions

Casting material - stainless steel AISI 316L
Wall thickness - 3 mm

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Possible options for configuring the kit are listed below.

Satin stainless steel slanted exhaust tip without a clamp with a diffuser.

• Inner intake diameter - 76 mm
• Diameter of the tip - 89 mm 
• Total length of tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
• Tip length - 105 mm

The first photo shows the applied logo on the tip.

Universal passage silencer made of stainless steel.
Damper can length - 400 mm
The width / height of the muffler can - 220/130 mm
Length of ends - 150 mm
Tip diameter - 2x63.5 mm
Inlet pipe diameter - 2x50, 50, 63.5, 70, 76 mm
The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe made for:

• Porsche Macan 2.0 TFSI
• Audi A4 (B8) 2.0 TFSI
• Audi Q5 (8RB) 2.0 TFSI

Catback Hyundai i30N

2.0 T-GDi
2017-2020
250, 275 ps
FWD

The diameter of the pipe for connecting to the original flange - 76 mm.
The outlet diameter of the exhaust tailpipes - 114 mm.

The product is not homologated and cannot be approved for use on public roads in the EU.

Can Am Maverick X3
Downpipe diameter - 63.5 mm

Downpipe fits X3, X RC TURBO RR, X3 Turbo R X RS versions.

The product is not homologated and cannot be approved for use on public roads in the EU.

See below for configuration options: