Downpipe BMW G30 520i, G30 530iX
B48
2.0l 
2017-2020
184 bhp
RWD

Średnica rury - 88,9 mm
Średnica rury w miejscu łączenia z sekcją środkową - 80 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe Cupra Formentor 2.0 TSI with catalyst 
2.0 TSI 
2020-
310 bhp
AWD
Fits OPF versions

Casting material - stainless steel AISI 316L
Wall thickness - 3 mm

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Possible options for configuring the kit are listed below.

Downpipe Volkswagen Arteon 2.0 TSI
2.0 TSI 
2021-
310 bhp
AWD
Fits OPF versions

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Possible options for configuring the kit are listed below.

Catback - middle and end silencer TOYOTA YARIS GR 1.6
1,6
2020-
261 km
AWD
Pipe diameter - 76 mm

The kit does not include mounting screws and gaskets.

It is possible to buy a front part - downpipe TOYOTA YARIS GR

All possible options of configuring the downpipe can be found below.

The product is not homologated and cannot be approved for use on public roads in the EU.

Das Produkt besitzt keine Homologation und darf nicht auf öffentlichen Straßen in der EU verwendet werden.

Banners are printed on one side using CMYK solvent duct technology. Printing is done in 1080 DPI resolution. The banner is welded without wrinkles all around to strengthen the edges (weld width 25-30 mm). The banner is machine welded with galvanized stainless steel eyelets. Coated banner - 510 g/m2. It is characterized by high quality white, and increased durability (1000x1000 fibers). Additional advantage is the matte finish of this banner - does not give light reflections.
The banner is sold separately, without a frame.

WOMEN'S T-Shirt - RM Motors

• Material: 97% cotton, 3% polyester.
• Weight: 190/195 g/m²
• Sizes: S, M, L, XL
• Label: woven
• Color: black
• Garment marking method: thermal transfer

Below you can see all available sizes:

Universal silencer based on aluminized construction of the box.
Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 63 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe Decat for AUDI A4 S4 / Avant Quattro / Avant 3.0 TDI

3.0 TDI
2016-2021
286 hp
Quattro

Pipe diameter - 76 mm

There is a choice of versions:
without silencer, with a silencer or with catalytic converter

In addition, you can choose a version with or without a heat shield:

The product is not homologated and cannot be approved for use on public roads in the EU.

Polished stainless steel oblique tip with welded diffuser, choice of with or without clamp.

Intake diameter inside - 50 / 63,5 / 76 mm
Diameter of the tip -  76 / 89 / 101 mm 
Total length of the tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
Tip length - 105 mm

RM Motors slanted oval tip in satin stainless steel with perforated diffuser

Inner intake diameter - 51 / 63.5 mm
Tip width - 100 mm
Tip height - 77 mm
Overall length - 140 mm
Tip length - 105 mm
Bevel angle - 19°

Satin stainless steel tip available with or without clamp.

Intake diameter inside - 50 / 63,5 / 76 mm
Diameter of the tip - 76 / 89 / 101 mm 
Total length of the tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
Tip length - 105 mm

Universal silencer based on aluminized construction of the box.

Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 50 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe Cupra Ateca
2.0 TSI 
2021-2022
300 bhp
4Drive
Fits OPF versions

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Possible options for configuring the kit are listed below.

Universal silencer based on aluminized construction of the box.
Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 50 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe set for AUDI A4 S4 / Avant Quattro / Avant 3.0 TDI +heat shield

3.0 TDI
2016-2021
286 hp
Quattro

Pipe diameter - 76 mm

There is a choice of versions:
without silencer, with a silencer or with catalytic converter.

In addition, you can choose a version with or without a heat shield.

The product is not homologated and cannot be approved for use on public roads in the EU.

Front bumper with steel corners in black.

Fits:

• CF MOTO 520 2023+

Downpipe BMW G30 520i, G30 530iX
B48
2.0l 
2017-2020
184 bhp
RWD

Średnica rury - 88,9 mm
Średnica rury w miejscu łączenia z sekcją środkową - 80 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe Cupra Formentor 2.0 TSI with catalyst 
2.0 TSI 
2020-
310 bhp
AWD
Fits OPF versions

Casting material - stainless steel AISI 316L
Wall thickness - 3 mm

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Possible options for configuring the kit are listed below.

Downpipe Volkswagen Arteon 2.0 TSI
2.0 TSI 
2021-
310 bhp
AWD
Fits OPF versions

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Possible options for configuring the kit are listed below.

Catback - middle and end silencer TOYOTA YARIS GR 1.6
1,6
2020-
261 km
AWD
Pipe diameter - 76 mm

The kit does not include mounting screws and gaskets.

It is possible to buy a front part - downpipe TOYOTA YARIS GR

All possible options of configuring the downpipe can be found below.

The product is not homologated and cannot be approved for use on public roads in the EU.

Das Produkt besitzt keine Homologation und darf nicht auf öffentlichen Straßen in der EU verwendet werden.

Banners are printed on one side using CMYK solvent duct technology. Printing is done in 1080 DPI resolution. The banner is welded without wrinkles all around to strengthen the edges (weld width 25-30 mm). The banner is machine welded with galvanized stainless steel eyelets. Coated banner - 510 g/m2. It is characterized by high quality white, and increased durability (1000x1000 fibers). Additional advantage is the matte finish of this banner - does not give light reflections.
The banner is sold separately, without a frame.