KOMPLET 2 BAGAŻNIKÓW TYŁ LONCIN XWOLF 1000 2025

Satin stainless steel slanted exhaust tip without a clamp with a diffuser.

• Inner intake diameter - 63 mm
• Diameter of the tip - 89 m, 101 mm
• Total length of tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
• Tip length - 105 mm

The first photo shows the applied logo on the tip.

Catback MINI Cooper S F56 LCI JCW B48D
2022 -
2.0l 
B48D 
231 km
FWD
Fits OPF version


Exhaust pipe diameter - 63.5 mm 2,5" (on closed flap)
Exhaust pipe diameter - 76 mm / 3" (on open flap) 


It is also possible to purchase the downpipe itself or a complete exhaust system.

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe AUDI A6 C8 Avant Quattro / S6 2.0 TFSI +heat shield

2.0 TFSI 
2019-2021
265 km
Quattro

Pipe diameter - 76 mm

There is a choice of versions:
without silencer, with a silencer or with catalytic converter

In addition, you can choose a version with or without a heat shield:

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe Cupra Ateca
2.0 TSI 
2021-2022
300 bhp
4Drive
Fits OPF versions

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Possible options for configuring the kit are listed below.

Polished stainless steel tip available with or without clamp.

Intake diameter inside - 50 / 63,5 / 76 mm
Diameter of the tip - 76  / 89 / 101 mm
Total length of the tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
Tip length - 105 mm

Universal silencer based on aluminized construction of the box.

Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 50 mm, 63,5 mm, 2x50 mm  

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal silencer based on aluminized construction of the box.

Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 2X50 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe Decat for AUDI A4 S4 / Avant Quattro / Avant 3.0 TDI

3.0 TDI
2016-2021
286 hp
Quattro

Pipe diameter - 76 mm

There is a choice of versions:
without silencer, with a silencer or with catalytic converter

In addition, you can choose a version with or without a heat shield:

The product is not homologated and cannot be approved for use on public roads in the EU.

Banners are printed on one side using CMYK solvent duct technology. Printing is done in 1080 DPI resolution. The banner is welded without wrinkles all around to strengthen the edges (weld width 25-30 mm). The banner is machine welded with galvanized stainless steel eyelets. Coated banner - 510 g/m2. It is characterized by high quality white, and increased durability (1000x1000 fibers). Additional advantage is the matte finish of this banner - does not give light reflections.
The banner is sold separately, without a frame.

Satin stainless steel slanted exhaust tip without a clamp with a diffuser of the flared diffuser.

• Inner intake diameter - 50 mm, 63 mm
• Diameter of the tip - 89 mm, 101 mm 
• Total length of tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
• Tip length - 105 mm

The first photo shows the applied logo on the tip.

Satin stainless steel slanted exhaust tip without a clamp with a diffuser.

• Inner intake diameter - 63 mm
• Diameter of the tip - 89 mm 
• Total length of tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
• Tip length - 105 mm

The first photo shows the applied logo on the tip.

Downpipe AUDI A7 SPORTBACK
2.0 TFSI
2015-2016
252 bhp
Quattro
Pipe diameter - 76 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe Audi SQ2 2.0 TFSI with catalyst 

2.0 TSI 
2020-
310 bhp
AWD
Fits OPF versions

Casting material - stainless steel AISI 316L
Wall thickness - 3 mm

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

Possible options for configuring the kit are listed below.

The product is not homologated and cannot be approved for use on public roads in the EU.