PROM.OS16
Squdde Skid Plate Set for ODES 850/1000 Quad 2025
Made from 4 mm thick PA11 aluminum (ENAW-5754-H22), our skid plates provide comprehensive protection, shielding the control arms, joints, and the entire underside of your quad.
All shield components come with the appropriate bolts and clamps, which should not be mixed. The quantity of these fasteners depends on the number of holes. After properly positioning and fully mounting the skid plates to the frame, all bolts and nuts must be securely tightened.
PROM.BUM3/B
Fits:
EP300
A stainless steel silencer with a built-in damper
Can height / width - 130x220 mm
Valve type - Electric Inlet
KPZS/DK
Satin stainless steel straight tip with perforated diffuser available with or without clamp.
Intake diameter inside - 50 / 63,5 / 76 mm
Diameter of the tip - 76 / 89 / 101 mm
Total length - 140 mm
Tip length - 105 mm
EPCUTMA70
Exhaust valve Mercedes-Benz, Audi, BMW, Honda - 70 mm - 2.75"
RMG9
Banners are printed on one side using CMYK solvent duct technology. Printing is done in 1080 DPI resolution. The banner is welded without wrinkles all around to strengthen the edges (weld width 25-30 mm). The banner is machine welded with galvanized stainless steel eyelets. Coated banner - 510 g/m2. It is characterized by high quality white, and increased durability (1000x1000 fibers). Additional advantage is the matte finish of this banner - does not give light reflections.
The banner is sold separately, without a frame.
PROM.213520C/MS
Downpipe Cupra Ateca 2.0 TSI 4Drive with catalyst
2.0 TSI
2020-
310 bhp
AWD
Fits OPF versions
Casting material - stainless steel AISI 316L
Wall thickness - 3 mm
Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm
The product is not homologated and cannot be approved for use on public roads in the EU.
Possible options for configuring the kit are listed below.
940103
GPF delete Kia Sportage V
1.6 T-GDi
2021-
204 bhp
FWD
Pipe diameter - 63.5 mm
The product is not homologated and cannot be approved for use on public roads in the EU.
RM106/50
Universal silencer based on aluminized construction of the box.
Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 50 mm
The product is not homologated and cannot be approved for use on public roads in the EU.
PROM.EVP01/63/350/E
Stainless steel embossed damper with integral damper
Valve type - Electric
Pipe diameter - 63,5 mm, 76 mm
Height x width x length of the silencer box - 130x220x350 mm
Check also other silencers from our offer.
PROM.213520C/MS
Downpipe Volkswagen Golf VIII R with catalyst
2.0 TSI
2020-
310 bhp
AWD
Fits OPF versions
Casting material - stainless steel AISI 316L
Wall thickness - 3 mm
Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm
The product is not homologated and cannot be approved for use on public roads in the EU.
Possible options for configuring the kit are listed below.
PROM.216108+216109
2.0 TDI
2019-
200 hp
Pipe diameter - 76 mm
DPF OFF diameter - 63 mm
There is a choice of versions:
without silencer, with a silencer or with catalytic converter
In addition, you can choose a version with or without a heat shield:
The product is not homologated and cannot be approved for use on public roads in the EU.
ES006/40/300
Universal straight through silencer made of acid-resistant steel.
Height/width of the box - 78x139 mm
Length of the silencer box - 300 mm
Inlet diameter - 2x40 mm
Outlet diameter - 2x40 mm
Length of inlet pipe - 40 mm
The product is not homologated and cannot be approved for use on public roads in the EU.
PROM.SET5/RALLY
Catback - middle and end silencer TOYOTA YARIS GR 1.6
1,6
2020-
261 km
AWD
Pipe diameter - 76 mm
The kit does not include mounting screws and gaskets.
It is possible to buy a front part - downpipe TOYOTA YARIS GR
All possible options of configuring the downpipe can be found below.
The product is not homologated and cannot be approved for use on public roads in the EU.
Das Produkt besitzt keine Homologation und darf nicht auf öffentlichen Straßen in der EU verwendet werden.
PROM.213520+213521
Downpipe Volkswagen Arteon 2.0 TSI
2.0 TSI
2021-
310 bhp
AWD
Fits OPF versions
Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm
The product is not homologated and cannot be approved for use on public roads in the EU.
Possible options for configuring the kit are listed below.
EPCUTMA63
Exhaust valve Mercedes-Benz, Audi, BMW, Honda - 63.5 mm - 2.5"
Polski
36 rat x ~55 zł
