Universal passage silencer made of stainless steel.

Can height / width – 130×220 mm
Damper can length – 300, 350, 400, 450, 500 mm
Inlet diameter – 50, 60, 63.5, 70, 76, mm
Inlet pipe length – 50 mm
Outlet diameter – 2×50 mm
The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe AUDI A6 C7 2.0
2.0 TDI
2011-2014
177, 190 km
FWD + Quattro
Pipe diameter - 63,5 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Can Am Maverick X3
Downpipe diameter - 63.5 mm

Downpipe fits X3, X RC TURBO RR, X3 Turbo R X RS versions.

The product is not homologated and cannot be approved for use on public roads in the EU.

See below for configuration options: 

Downpipe AUDI A7 Sportback 3.0 TDI +heat shield

3.0 TDI
2020-2021
286 hp
Quattro

Pipe diameter - 76 mm

There is a choice of versions:
without silencer, with a silencer or with catalytic converter.

In addition, you can choose a version with or without a heat shield.

The product is not homologated and cannot be approved for use on public roads in the EU.

Polished stainless steel slant tip with perforated diffuser, choice of with or without clamp.

Intake diameter inside - 50 / 63,5 / 76 mm
Diameter of the tip - 76 / 89 / 101 mm 
Total length of the tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
Tip length - 105 mm

Banners are printed on one side using CMYK solvent duct technology. Printing is done in 1080 DPI resolution. The banner is welded without wrinkles all around to strengthen the edges (weld width 25-30 mm). The banner is machine welded with galvanized stainless steel eyelets. Coated banner - 510 g/m2. It is characterized by high quality white, and increased durability (1000x1000 fibers). Additional advantage is the matte finish of this banner - does not give light reflections.
The banner is sold separately, without a frame.

Downpipe Decat for AUDI A5 S5 / Cabriolet / Sportback / Coupe 3.0 TDI +EGR plug

3.0 TDI

AUDI A5 S5 / Cabriolet
2018-2021

AUDI A5 S5 / Sportback / Coupe
2017-2021

286 KM
Quattro

Pipe diameter - 76 mm

There is a choice of versions:
without silencer, with a silencer or with catalytic converter

In addition, you can choose a version with or without a heat shield:

The product is not homologated and cannot be approved for use on public roads in the EU.

DIMENSIONS: Length of the box - 650 - 950mm (every 50 mm)
Diameter of the box - 110/120/130/140/150/160 mm
Diameter of the inlet and inner pipe - 50/54/57/60/63,5/70/76 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal silencer based on aluminized construction of the box.
Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 50 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe AUDI A5 / S5 / Cabrio/ S5 Coupe / A5 Sportback +heat shield

2.0 TFSI 
2017-2021
245 km
Quattro

Pipe diameter - 76 mm

There is a choice of versions:
without silencer, with a silencer or with catalytic converter

In addition, you can choose a version with or without a heat shield:

The product is not homologated and cannot be approved for use on public roads in the EU.

GPF delete Hyundai Kona N

2.0 T-GDi 
2017-
250, 275 bhp
FWD

Pipe diameter - 76 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

There is a choice of versions:
without silencer or with a silencer.

Muffler dimensions:

Can height / width - 180x100 mm
The length of the silencer box - 250/300/350/400/450/500 mm
Inlet diameter - 50 / 60 / 63.5 / 70 mm

The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal passage silencer made of stainless steel.

Damper can length - 400 mm
The width / height of the muffler can - 220/130 mm
Tip length - 250 mm
Tip diameter - 89 mm
Inlet pipe diameter - 50, 60, 63.5, 70, 76 mm
The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal through-hole silencer made of acid-resistant steel.
Height/width of the box - 78x139 mm
Length of the silencer box - 380 mm
Inlet diameter - 60 mm
Outlet diameter - 2x40 mm
Length of inlet pipe - 40 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Satin stainless steel tip available with or without clamp.

Intake diameter inside - 50 / 63,5 / 76 mm
Diameter of the tip - 76 / 89 / 101 mm 
Total length of the tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
Tip length - 105 mm

Banners are printed on one side using CMYK solvent duct technology. Printing is done in 1080 DPI resolution. The banner is welded without wrinkles all around to strengthen the edges (weld width 25-30 mm). The banner is machine welded with galvanized stainless steel eyelets. Coated banner - 510 g/m2. It is characterized by high quality white, and increased durability (1000x1000 fibers). Additional advantage is the matte finish of this banner - does not give light reflections.
The banner is sold separately, without a frame.