Muffler dimensions:

Can height / width - 180x100 mm
The length of the silencer box - 250/300/350/400/450/500 mm
Inlet diameter - 50/60 / 63.5 / 70/76 mm

The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe Lancia Delta 1.4T with catalytic converter
EURO 4 emission standard 
1,4T 
120, 150 bhp
2008-2012 
FWD

Pipe diameter - 76 mm 
Diameter at the connection point with the turbo - 70 mm
Diameter at the point of connection with the rest of the system - 56 mm 

The product is not homologated and cannot be approved for use on public roads in the EU

Below it is possible to choose the appropriate catalyst capacity - 100 or 200 cpsi

Banners are printed on one side using CMYK solvent duct technology. Printing is done in 1080 DPI resolution. The banner is welded without wrinkles all around to strengthen the edges (weld width 25-30 mm). The banner is machine welded with galvanized stainless steel eyelets. Coated banner - 510 g/m2. It is characterized by high quality white, and increased durability (1000x1000 fibers). Additional advantage is the matte finish of this banner - does not give light reflections.
The banner is sold separately, without a frame.

Downpipe Cupra Ateca
2.0 TSI 
2021-2022
300 bhp
4Drive
Fits OPF versions

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Possible options for configuring the kit are listed below.

Universal passage silencer made of stainless steel.

Can height / width – 130×220 mm
Damper can length – 300, 350, 400, 450, 500 mm
Inlet diameter – 50, 60, 63.5, 70, 76, mm
Inlet pipe length – 50 mm
Outlet diameter – 2×50 mm

The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Catback - middle and end silencer TOYOTA YARIS GR 1.6
1,6
2020-
261 km
AWD
Pipe diameter - 76 mm

The kit does not include mounting screws and gaskets.

It is possible to buy a front part - downpipe TOYOTA YARIS GR

All possible options of configuring the downpipe can be found below.

The product is not homologated and cannot be approved for use on public roads in the EU.

Das Produkt besitzt keine Homologation und darf nicht auf öffentlichen Straßen in der EU verwendet werden.

Universal silencer based on aluminized construction of the box.
Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 50 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe Skoda Karoq with catalyst 

2.0 TSI 
2022-2023
190 bhp
AWD
Fits OPF versions

Casting material - stainless steel AISI 316L
Wall thickness - 3 mm

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Possible options for configuring the kit are listed below.

Universal silencer based on aluminized construction of the box.

Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 50 mm, 63,5 mm, 2x50 mm  

The product is not homologated and cannot be approved for use on public roads in the EU.

Straight-through transverse silencer with electric valve.

Height/width of the box - 130x220 mm
Length of the silencer box - 350 mm
Total length - 570 mm
Intake/outlet diameter - 76 mm 

Valve type - Electric
Side - Left / Right

It is possible to select the appropriate tips:
For 76 mm diameter muffler - LINK

Downpipe set for AUDI A8 S8 / Quattro 3.0 TDI +heat shield

3.0 TDI
AUDI A8 S8 D5
2018-2021

AUDI A8 S8 Quattro
2019-2021

286 hp

Pipe diameter - 76 mm

There is a choice of versions:
without silencer, with a silencer or with catalytic converter.

In addition, you can choose a version with or without a heat shield.

The product is not homologated and cannot be approved for use on public roads in the EU.

Catback Hyundai i30N

2.0 T-GDi
2017-2020
250, 275 ps
FWD

The diameter of the pipe for connecting to the original flange - 76 mm.
The outlet diameter of the exhaust tailpipes - 114 mm.

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal passage silencer made of stainless steel.

Damper can length - 400 mm
The width / height of the muffler can - 220/130 mm
Length of ends - 250 mm
Tip diameter - 2x76 mm
Inlet pipe diameter - 2x50, 50, 60, 63.5, 70, 76 mm
The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Set of straight-through silencers with electric valve EV03
Box height/width - 130x220 mm
Valve type - Electric
Inlet/outlet diameter - 63,5 , 76 mm 

It is possible to select the appropriate tips:
For the silencer with a diameter of 63.5 mm - LINK
For silencer with a diameter of 76 mm - LINK

Downpipe Volkswagen Golf VIII R 2.0 TSI
2.0 TSI 
2020-
320 bhp
AWD
Fits OPF versions

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Possible options for configuring the kit are listed below.

Downpipe Cupra Ateca 2.0 TSI 4Drive with catalyst 

2.0 TSI 
2020-
310 bhp
AWD
Fits OPF versions

Casting material - stainless steel AISI 316L
Wall thickness - 3 mm

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Possible options for configuring the kit are listed below.

Muffler dimensions:

Can height / width - 180x100 mm
The length of the silencer box - 250/300/350/400/450/500 mm
Inlet diameter - 50/60 / 63.5 / 70/76 mm

The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe Lancia Delta 1.4T with catalytic converter
EURO 4 emission standard 
1,4T 
120, 150 bhp
2008-2012 
FWD

Pipe diameter - 76 mm 
Diameter at the connection point with the turbo - 70 mm
Diameter at the point of connection with the rest of the system - 56 mm 

The product is not homologated and cannot be approved for use on public roads in the EU

Below it is possible to choose the appropriate catalyst capacity - 100 or 200 cpsi

Banners are printed on one side using CMYK solvent duct technology. Printing is done in 1080 DPI resolution. The banner is welded without wrinkles all around to strengthen the edges (weld width 25-30 mm). The banner is machine welded with galvanized stainless steel eyelets. Coated banner - 510 g/m2. It is characterized by high quality white, and increased durability (1000x1000 fibers). Additional advantage is the matte finish of this banner - does not give light reflections.
The banner is sold separately, without a frame.

Downpipe Cupra Ateca
2.0 TSI 
2021-2022
300 bhp
4Drive
Fits OPF versions

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Possible options for configuring the kit are listed below.

Universal passage silencer made of stainless steel.

Can height / width – 130×220 mm
Damper can length – 300, 350, 400, 450, 500 mm
Inlet diameter – 50, 60, 63.5, 70, 76, mm
Inlet pipe length – 50 mm
Outlet diameter – 2×50 mm

The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.