Downpipe set for AUDI A4 S4 / Avant Quattro / Avant 3.0 TDI +heat shield

3.0 TDI
2016-2021
286 hp
Quattro

Pipe diameter - 76 mm

There is a choice of versions:
without silencer, with a silencer or with catalytic converter.

In addition, you can choose a version with or without a heat shield.

The product is not homologated and cannot be approved for use on public roads in the EU.

Stainless steel muffler

Muffler dimensions:
Width/height of silencer box - 220/130 mm
Length of the muffler box - 400/500 mm
Inlet diameter - 63.5 / 76 mm
Outlet diameter - 2x50 / 2x63.5 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Stainless steel pipe connector with a diameter of 50/63.5/76 mm 

Used to connect pipes of the same diameter in a straight section.
The tension springs used eliminate the welding process and make installation a lot easier.

Length of the connector with a diameter of 63.5/76 mm - 250 mm
Length of connector with a diameter of 50 mm - 260 mm

Porsche Macan S 3.0 TDI downpipe with silencer.

2014-2024

258HP

Pipe diameter: 76mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe SUBARU Impreza Mk3 2.5 WRX STI
2.5
2008-2014
300 bhp
AWD

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe Abarth 695 1.4T
EURO 4 emission standard 
1,4T 
162, 177 bhp
2009-2017
FWD

Pipe diameter - 76 mm 
Diameter at the connection point with the turbo - 70 mm
Diameter at the point of connection with the rest of the system - 56 mm 

Below it is possible to choose the appropriate catalyst capacity - 100 or 200 cpsi

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe BMW G01 X3 20i, 20iX, 30iX
B48
2.0l 
2017-2021
184 bhp
xDrive

Pipe diameter - 88.9 mm
Pipe diameter at the connection point with the center section - 80 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

A stainless steel silencer with a built-in damper
Can height / width - 130x220 mm
Valve type - Electric Inlet

Downpipe Cupra Formentor 2.0 TSI with catalyst 
2.0 TSI 
2020-
310 bhp
AWD
Fits OPF versions

Casting material - stainless steel AISI 316L
Wall thickness - 3 mm

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Possible options for configuring the kit are listed below.

Polished stainless steel tip available with or without clamp.

Intake diameter inside - 50 / 63,5 / 76 mm
Diameter of the tip - 76  / 89 / 101 mm
Total length of the tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
Tip length - 105 mm

Downpipe Hyundai i30N 
choice of version with or without center silencer

2.0 T-GDi
2017-2021
250, 275 bhp
FWD

Pipe diameter from the turbo - 88.9 mm, with a downpipe diameter of 76 mm
Pipe diameter in the second component - 76 mm

The price of the downpipe includes: decat including v-band, flexible connector, GPF delete.

The product is not homologated and cannot be approved for use on public roads in the EU.

Possible options for configuring the kit can be found below:

Polished stainless steel slant tip with perforated diffuser, choice of with or without clamp.

Intake diameter inside - 50 / 63,5 / 76 mm
Diameter of the tip - 76 / 89 / 101 mm 
Total length of the tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
Tip length - 105 mm