Men's kangaroo sweatshirt

•     65% cotton, 35% polyester
•     straight cut with side seams
•     hood with lining with drawstring
•     inner back hem reinforced with a colorful strip from the outer material
•     kangaroo pocket
•     bottom hem and sleeve cuffs made of 2:2 rib knit with 5% elastane
•     combed inner side
•     Label: woven

Sizing is understated, we advise you to choose a larger size.

Downpipe set for AUDI A8 S8 / Quattro 3.0 TDI +heat shield

3.0 TDI
AUDI A8 S8 D5
2018-2021

AUDI A8 S8 Quattro
2019-2021

286 hp

Pipe diameter - 76 mm

There is a choice of versions:
without silencer, with a silencer or with catalytic converter.

In addition, you can choose a version with or without a heat shield.

The product is not homologated and cannot be approved for use on public roads in the EU.

Satin stainless steel slanted exhaust tip without a clamp with a diffuser.

• Inner intake diameter - 63, 76 mm
• Diameter of the tip - 89, 101 mm 
• Total length of tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
• Tip length - 105 mm

The first photo shows the applied logo on the tip.

Round through silencer

Diameter of silencer - 130 mm
Silencer length - 300 mm
Exhaust tip diameter - 89 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe BMW G30 520i, G30 530iX
B48
2.0l 
2017-2020
184 bhp
RWD

Średnica rury - 88,9 mm
Średnica rury w miejscu łączenia z sekcją środkową - 80 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

GPF delete Hyundai i30N

2.0 T-GDi 
2017-
250, 275 bhp
FWD

(GPF delete also fits after lifting version from 2021)

Pipe diameter - 76 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

There is a choice of versions:
without silencer or with a silencer.

Downpipe Audi SQ2
2.0 TFSI 
2021-
300 bhp
AWD
Fits OPF versions

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

Possible options for configuring the kit are listed below.

The product is not homologated and cannot be approved for use on public roads in the EU.

Satin stainless steel slanted exhaust tip without a clamp with a diffuser.

• Inner intake diameter - 76 mm
• Diameter of the tip - 89 mm 
• Total length of tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
• Tip length - 105 mm

The first photo shows the applied logo on the tip.

Downpipe Fiat 500X 1.4T with catalytic converter
EURO 4 emission standard 
1,4T 
170 bhp
2015-2018
FWD

Pipe diameter - 76 mm 
Diameter at the connection point with the turbo - 70 mm
Diameter at the point of connection with the rest of the system - 56 mm 

The product is not homologated and cannot be approved for use on public roads in the EU.

Below it is possible to choose the appropriate catalyst capacity - 100 or 200 cpsi

Banners are printed on one side using CMYK solvent duct technology. Printing is done in 1080 DPI resolution. The banner is welded without wrinkles all around to strengthen the edges (weld width 25-30 mm). The banner is machine welded with galvanized stainless steel eyelets. Coated banner - 510 g/m2. It is characterized by high quality white, and increased durability (1000x1000 fibers). Additional advantage is the matte finish of this banner - does not give light reflections.
The banner is sold separately, without a frame.

Downpipe Hyundai i20N with catalyst
1.6 T-GDi
2021-
204 bhp
FWD
Pipe diameter - 76 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Possible options for configuring the kit are listed below.

Universal silencer based on aluminized construction of the box.
Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 2X50 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal passage silencer made of stainless steel.

Damper can length - 400 mm
The width / height of the muffler can - 220/130 mm
Tip length - 200 mm
Tip diameter - 89 mm
Inlet pipe diameter - 50, 63.5, 70, 76 mm
The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal silencer based on aluminized construction of the box.

Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 63 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Satin stainless steel straight tip with perforated diffuser available with or without clamp.

Intake diameter inside - 50 / 63,5 / 76 mm
Diameter of the tip - 76 / 89 / 101 mm
Total length - 140 mm
Tip length - 105 mm

Satin stainless steel slanted exhaust tip without a clamp with a diffuser.

• Inner intake diameter - 63 mm
• Diameter of the tip - 89 mm 
• Total length of tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
• Tip length - 105 mm

The first photo shows the applied logo on the tip.