Downpipe Volkswagen Arteon 2.0 TSI with catalyst 

2.0 TSI 
2020-
310 bhp
AWD
Fits OPF versions

Casting material - stainless steel AISI 316L
Wall thickness - 3 mm

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Possible options for configuring the kit are listed below.

Downpipe Fiat Grande Punto 1.4T with catalytic converter
EURO 4 emission standard 
1,4T 
135 bhp
2012-2015
FWD

Pipe diameter - 76 mm 
Diameter at the connection point with the turbo - 70 mm
Diameter at the point of connection with the rest of the system - 56 mm 

The product is not homologated and cannot be approved for use on public roads in the EU.

Below it is possible to choose the appropriate catalyst capacity - 100 or 200 cpsi

Round through silencer
Diameter of silencer - 150 mm
Silencer length - 350 mm
Tip length - 150 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe set Volkswagen Golf VIII 2.0 TDI GTD +heat shield

2.0 TDI
2019-
200 hp

Pipe diameter - 76 mm
DPF OFF diameter - 63 mm

There is a choice of versions:
without silencer, with a silencer or with catalytic converter

In addition, you can choose a version with or without a heat shield:

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal passage silencer made of stainless steel.

Can height / width – 130×220 mm
Damper can length – 300, 350, 400, 450, 500 mm
Inlet diameter – 50, 60, 63.5, 70, 76, mm
Inlet pipe length – 50 mm
Outlet diameter – 2×50 mm

The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal passage silencer made of stainless steel.
Damper can length - 400 mm
The width / height of the muffler can - 220/130 mm
Length of ends - 250 mm
Tip diameter - 2x89 mm
Inlet pipe diameter - 2x50, 50, 63.5, 70, 76 mm
The product is also available in a version with an embossing inside the passage that improves damping.

Polished stainless steel tip available with or without clamp.

Intake diameter inside - 50 / 63,5 / 76 mm
Diameter of the tip - 76 / 89 / 101 mm
Total length of the tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
Tip length - 105 mm

Satin stainless steel slanted exhaust tip without a clamp with a diffuser.

• Inner intake diameter - 50mm, 63 mm, 76 mm
• Diameter of the tip - 89 mm 
• Total length of tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
• Tip length - 105 mm

The first photo shows the applied logo on the tip.

Downpipe Cupra Leon ST (Sportstourer) 2.0 TSI with catalyst 

2.0 TSI 
2020-
310 bhp
AWD
Fits OPF versions

Casting material - stainless steel AISI 316L
Wall thickness - 3 mm

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Possible options for configuring the kit are listed below.

Satin stainless steel slanted exhaust tip without a clamp with a diffuser.

• Inner intake diameter - 76 mm
• Diameter of the tip - 89 mm 
• Total length of tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
• Tip length - 105 mm

The first photo shows the applied logo on the tip.

Downpipe Lancia Delta 1.4T
1,4T 
120, 150 bhp
2008-2012 
FWD

Pipe diameter - 76 mm
Diameter at the connection point with the turbo - 70 mm
Diameter at the connection point with the downpipe - 56 mm 

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe AUDI A7 SPORTBACK
2.0 TFSI
2015-2016
252 bhp
Quattro
Pipe diameter - 76 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Conical through silencer made of acid-resistant steel
Can length -  240 mm
Diameter of the can - 110 mm
Diameter of inlet/outlet - 63,5 mm

Downpipe Jeep Renegade 1.4T 
1,4T 
170 bhp
2015-2018
FWD

Pipe diameter - 76 mm
Diameter at the connection point with the turbo - 70 mm
Diameter at the connection point with the downpipe - 56 mm 

The product is not homologated and cannot be approved for use on public roads in the EU.

Satin stainless steel slanted exhaust tip without a clamp with a diffuser.

• Inner intake diameter - 63 mm
• Diameter of the tip - 89 mm 
• Total length of tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
• Tip length - 105 mm

The first photo shows the applied logo on the tip.