Banners are printed on one side using CMYK solvent duct technology. Printing is done in 1080 DPI resolution. The banner is welded without wrinkles all around to strengthen the edges (weld width 25-30 mm). The banner is machine welded with galvanized stainless steel eyelets. Coated banner - 510 g/m2. It is characterized by high quality white, and increased durability (1000x1000 fibers). Additional advantage is the matte finish of this banner - does not give light reflections.
The banner is sold separately, without a frame.

Downpipe BMW G30 520i, G30 530iX
B48
2.0l 
2017-2020
184 bhp
RWD

Średnica rury - 88,9 mm
Średnica rury w miejscu łączenia z sekcją środkową - 80 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe Decat for AUDI A6 S6 / Avant / Sportback / Avant Quattro 3.0 TDI +EGR plug

3.0 TDI
2016-2021
286 hp
Quattro

Pipe diameter - 76 mm

There is a choice of versions:
without silencer, with a silencer or with catalytic converter

In addition, you can choose a version with or without a heat shield:

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal passage silencer made of stainless steel.

Can height / width – 130×220 mm
Damper can length – 250, 300, 350, 400, 450, 500 mm
Inlet diameter – 50, 60, 63.5, 70, 76, mm
Inlet pipe length – 50 mm
The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Exhaust valve Mercedes-Benz, Audi, BMW, Honda - 63.5 mm - 2.5" 

Set of straight-through silencers with Vacuum Valve EV03
Box height/width - 130x220 mm
Valve type - Vacuum
Inlet/outlet diameter - 63,5 , 76 mm 

It is possible to select the appropriate tips:
For the silencer with a diameter of 63.5 mm - LINK
For silencer with a diameter of 76 mm - LINK

Satin stainless steel slanted exhaust tip without a clamp with a diffuser.

• Inner intake diameter - 63 mm
• Diameter of the tip - 89 mm 
• Total length of tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
• Tip length - 105 mm

The first photo shows the applied logo on the tip.

Satin stainless steel slanted exhaust tip without a clamp with a diffuser.

• Inner intake diameter - 76 mm
• Diameter of the tip - 89 mm 
• Total length of tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
• Tip length - 105 mm

The first photo shows the applied logo on the tip.

Downpipe Volkswagen Golf VIII R 2.0 TSI
2.0 TSI 
2020-
320 bhp
AWD
Fits OPF versions

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Possible options for configuring the kit are listed below.

Universal passage silencer made of stainless steel.

Damper can length - 400 mm
The width / height of the muffler can - 220/130 mm
Tip length - 250 mm
Tip diameter - 89 mm
Inlet pipe diameter - 50, 60, 63.5, 70, 76 mm
The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Polished stainless steel tip available with or without clamp.

Intake diameter inside - 50 / 63,5 / 76 mm
Diameter of the tip - 76  / 89 / 101 mm
Total length of the tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
Tip length - 105 mm

Downpipe AUDI A7 SPORTBACK
2.0 TFSI
2015-2016
252 bhp
Quattro
Pipe diameter - 76 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Complete RM Motors exhaust system for Volskwagen Golf VII 7 GTI

2.0 TSI

2013-2019

220/230/265 bhp

FWD

Downpipe diameter - 76 mm

Exhaust pipe diameter - 63.5 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

GPF delete Kia Sportage V

1.6 T-GDi
2021-
204 bhp
FWD

Pipe diameter - 63.5 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Wheel scrapers - Can-Am Maverick X3 XRS designed for wheel size - 14 or 15 inches.
The set includes two scrapers - one for each of the rear wheels.