RM01
Lowest price in the last 30 days
DIMENSIONS: Length of the box - 250 - 600 mm (every 50 mm) Diameter of the box - 110/120/130/140/150/160 mm Diameter of the inlet and inner pipe - 50/54/57/60/63,5/70/76 mm
The product is not homologated and cannot be approved for use on public roads in the EU.
Sport silencer with through-body design
- Made entirely of acid-resistant steel T304
- Fully welded, hand finished
- Fully manufactured in Poland
- 24 months warranty
The interior of the muffler consists of:
- Stainless steel perforated tubes
- Stainless steel wool resistant to 800 degrees Celsius
- Fire-resistant full-pile glass mat
- Stamped, crack-resistant bottom
RM01 silencers with a box diameter greater than 130 mm and a length of 400 mm are not returnable, and their production time may be extended.
Data sheet
Specific References
| Reference | Can length | Inlet diameter | Can diameter | Price | Add to cart |
|---|---|---|---|---|---|
PROM.SQ7
The plow fits:
PROM.213520+213521
Downpipe Volkswagen Tiguan II R 2.0 TSI
2.0 TSI
2021-
320 bhp
AWD
Fits OPF versions
Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm
The product is not homologated and cannot be approved for use on public roads in the EU.
Possible options for configuring the kit are listed below.
PROM.940101+940102
Downpipe Hyundai i20N
1.6 T-GDi
2021-
204 bhp
FWD
Pipe diameter - 76 mm
The product is not homologated and cannot be approved for use on public roads in the EU.
Possible options for configuring the kit are listed below.
PROM.SQ18
The plow fits:
Assembly instructions for plows: YouTube - SQUDDE
220108
Downpipe AUDI A4 Avant Quattro / S4 2.0 TFSI +heat shield
2.0 TFSI
2016-2021
245 km
Quattro
Pipe diameter - 76 mm
There is a choice of versions:
without silencer, with a silencer or with catalytic converter
In addition, you can choose a version with or without a heat shield:
The product is not homologated and cannot be approved for use on public roads in the EU.
E113
Universal passage silencer made of stainless steel.
Damper can length - 400 mm
The width / height of the muffler can - 220/130 mm
Tip length - 250 mm
Tip diameter - 89 mm
Inlet pipe diameter - 50, 60, 63.5, 70, 76 mm
The product is also available in a version with an embossing inside the passage that improves damping.
The product is not homologated and cannot be approved for use on public roads in the EU.
KPCP/DS
Straight end in polished stainless steel with welded diffuser, choice of with or without clamp.
Intake diameter inside - 50 / 63,5 / 76 mm
Diameter of the tip - 76 / 89 / 101 mm
Total length of the tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
Tip length - 105 mm
RMG/C/S/M
RM Motors Cap
Available sizes are listed below:
E002/60/450
Muffler RM MOTORS JEEP COMMANDER V8 5.7 2006-2010
COMMANDER (XK, XH)
5.7 HEMI 4x4 (EZH) 5654ccm 347KM / 255kW 2009 / 06-2010 / 12
5.7 V8 4x4 (EZB) 5654ccm 326HP / 240kW 2005 / 09-2010 / 12
Muffler to be welded on in the place of the original one. The diameter of the pipe, the dimensions of the muffler box and its length are selected in such a way so that the assembly of the silencer is as easy as possible.
Model: E002 / 60/450
The product is not homologated and cannot be approved for use on public roads in the EU.
RMG/M/S
Men's T-Shirt - RM Motors
Below you can see all available sizes:
REDU
57-76 mm stainless steel straight exhaust reduction for welding
Total length - 120 mm
Wall thickness - 1.5 mm
Outer diameters - 57 / 60 / 63 / 65 / 70 / 76
Below you can choose the appropriate reduction:
KPCS
Satin stainless steel straight tip available with or without clamp.
Intake diameter inside - 50 / 63,5 / 76 mm
Diameter of the tip - 76 / 89 / 101 mm
Total length of the tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
Tip length - 105 mm
PROM.220109+220110
Downpipe set for AUDI Q5 3.0 TDI +heat shield
3.0 TDI
2017-2021
286 hp
Pipe diameter - 76 mm
There is a choice of versions:
without silencer, with a silencer or with catalytic converter.
In addition, you can choose a version with or without a heat shield.
The product is not homologated and cannot be approved for use on public roads in the EU.
940103
GPF delete Hyundai i20N
1.6 T-GDi
2021-
204 bhp
FWD
Pipe diameter - 63.5 mm
The product is not homologated and cannot be approved for use on public roads in the EU.
E003
Universal passage silencer made of stainless steel.
Can height / width – 130×220 mm
Damper can length – 250, 300, 350, 400, 450, 500 mm
Inlet diameter – 50, 60, 63.5, 70, 76, mm
Inlet pipe length – 50 mm
The product is also available in a version with an embossing inside the passage that improves damping.
The product is not homologated and cannot be approved for use on public roads in the EU.
PROM.220110
Downpipe Decat for AUDI A7 Sportback 3.0 TDI +EGR plug
3.0 TDI
2020-2021
286 hp
Quattro
Pipe diameter - 76 mm
There is a choice of versions:
without silencer, with a silencer or with catalytic converter
In addition, you can choose a version with or without a heat shield:
The product is not homologated and cannot be approved for use on public roads in the EU.
Polski
Deutsch
36 rat x ~12 zł
