RM MOTORS JEEP COMMANDER V8 5.7 2006-2010 Silencer

E002/60/450

592.00 zł
Tax included

View price history

Lowest price in the last 30 days

Shipping within 1-2 business days (in stock)

Muffler RM MOTORS JEEP COMMANDER V8 5.7 2006-2010

COMMANDER (XK, XH)

5.7 HEMI 4x4 (EZH) 5654ccm 347KM / 255kW 2009 / 06-2010 / 12

5.7 V8 4x4 (EZB) 5654ccm 326HP / 240kW 2005 / 09-2010 / 12

Muffler to be welded on in the place of the original one. The diameter of the pipe, the dimensions of the muffler box and its length are selected in such a way so that the assembly of the silencer is as easy as possible.

Model: E002 / 60/450

The product is not homologated and cannot be approved for use on public roads in the EU.

Quantity
Add to wishlist

Muffler dimensions:

Can length - 450 mm

Pipe diameter - 60 mm

Muffler box width / height - 130x220 mm

If you plan to modify your exhaust system to a greater extent, also increasing the diameter of the passage compared to the original, then we recommend ordering a model with an increased diameter of the passage

63.5 mm - model E002 / 63/450

70 mm - model E002 / 70/450

76 mm - model E002 / 76/450

However, if you want a more subdued sound, you can order the version with a silencing embossing, available at another auction, the EP002 / 60/450 model. Or similarly for the version with embossing, other flow diameters:

63.5 mm - model E002 / 63/450

70 mm - model EP002 / 70/450

76 mm - model EP002 / 76/450

One side of the muffler with offset through tube outlet.

The through-tube diameter is always the same both inside and outside the muffler. We do not use the tricks of upsetting and expanding the muffler nozzles, where from one muffler model several models with different pipe diameters are made, and in fact the diameter of the passage remains the same.

The other side of the muffler with the center entry of the through tube.

The silencer assembly side for the car as above - centrally inlet / outlet shifted.

In the case of universal use, the mounting side does not matter.

A silencer with a pass-through construction, damped with stainless steel wool and a glass mat resistant to 800 degrees Celsius (glass mat made of full hair - we do not use scraps). Fully welded by welding robot, hand finished. Each element of the product is made using CNC technology. Crack-resistant embossed bottoms have been used.

E002/60/450

8 other products in the same category:

End silencer CHEVROLET...
RM Motors

End silencer CHEVROLET Corvette 5.7 V8 to weld

E002/63/350

560.00 zł
Availability: 5 In Stock

Muffler to weld in the place of the original one. Pipe diameter, dimensions of the muffler box and its length are selected in such a way so that the silencer assembly is as easy as possible.

A silencer with a straight-through construction, damped with stainless steel wool and a glass mat resistant to 800 degrees Celsius (glass mat made of full hair - we do not use scraps). Fully welded by welding robot, hand finished. Each element of the product is made using CNC technology. Crack-resistant embossed bottoms have been used.

Muffler dimensions:
Can length - 350 mm
Pipe diameter - 63.5 mm
Can dimensions - 130x220 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

End silencer VOLKSWAGEN...
RM Motors

End silencer VOLKSWAGEN Golf V 3.2 to weld

E010/63/350

494.00 zł
Availability: Out of stock

Muffler to weld in the place of the original one. Pipe diameter, dimensions of the muffler box and its length are selected in such a way as so that the silencer assembly is as easy as possible.

A silencer with a straight-through construction, damped with stainless steel wool and a glass mat resistant to 800 degrees Celsius (glass mat made of full hair - we do not use scraps). Fully welded by welding robot, hand finished. Each element of the product is made using CNC technology. Crack-resistant embossed bottoms have been used.

Muffler dimensions:

Can length - 350 mm
Pipe diameter - 63.5 mm
Can dimensions - 130x220 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Middle Silencer DODGE...
RM Motors

Middle Silencer DODGE CHALLENGER V6 3.6 to weld

RM01/63/130/350

391.00 zł
Availability: 14 In Stock

Muffler ready to weld in the place of the original one. Pipe diameter, dimensions of the muffler box and its length are selected in such a way so that the silencer assembly is as easy as possible.

A silencer with a straight-through construction, damped with stainless steel wool and a glass mat resistant to 800 degrees Celsius (glass mat made of full hair - we do not use scraps). Fully welded by welding robot, hand finished. Each element of the product is made using CNC technology. Crack-resistant embossed bottoms have been used.

Muffler dimensions:

Can length - 350 mm
Pipe diameter - 63.5 mm
Can diameter - 130 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Muffler RM MOTORS JEEP...
RM Motors

Muffler RM MOTORS JEEP Grand Cherokee WJ/WG 4.0...

E002/60/450

592.00 zł
Availability: 4 In Stock

Muffler RM MOTORS JEEP Grand Cherokee WJ/WG 4.0 4.7

Below is a detailed list of models:

GRAND CHEROKEE II (WJ, WG)
4.0 4x4 (ERH) 3960ccm 190KM/140kW 1999/04-2005/09
4.7 V8 4x4 (EVA) 4701ccm 220KM/162kW 1999/04-2000/08
4.7 V8 4x4 (EVA) 4701ccm 223KM/164kW 1999/04-2005/09

Muffler to be welded in place of the original one. The diameter of the pipe, dimensions of the muffler box and its length were selected to make the installation of the muffler as easy as possible.
Model: E002/60/450

The product is not homologated and cannot be approved for use on public roads in the EU.

End silencer BMW E30 318i...
RM Motors

End silencer BMW E30 318i 1.8 to weld

RM01/50/150/450

430.00 zł
Availability: Out of stock

Muffler to weld in the place of the original one. Pipe diameter, dimensions of the muffler box and its length are selected in such a way as so that the silencer assembly is as easy as possible.

A silencer with a straight-through construction, damped with stainless steel wool and a glass mat resistant to 800 degrees Celsius (glass mat made of full hair - we do not use scraps). Fully welded by welding robot, hand finished. Each element of the product is made using CNC technology. Crack-resistant embossed bottoms have been used.

Muffler dimensions:
Can length - 450 mm
Pipe diameter - 50 mm
Can diameter - 150 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

End silencer NISSAN 350Z to...
RM Motors

End silencer NISSAN 350Z to weld

RM01/63/130/350

391.00 zł
Availability: 14 In Stock

Muffler to weld in the place of the original one. Pipe diameter, dimensions of the muffler box and its length are selected in such a way so that the silencer assembly is as easy as possible.

A silencer with a straight-through construction, damped with stainless steel wool and a glass mat resistant to 800 degrees Celsius (glass mat made of full hair - we do not use scraps). Fully welded by welding robot, hand finished. Each element of the product is made using CNC technology. Crack-resistant embossed bottoms have been used.

Muffler dimensions:
Can length - 350 mm
Pipe diameter - 63.5 mm
Can diameter - 130 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

RM MOTORS JEEP CHEROKEE XJ...
RM Motors

RM MOTORS JEEP CHEROKEE XJ 2.5/4.0 Muffler

E002/60/450

592.00 zł
Availability: 4 In Stock

Muffler RM MOTORS JEEP Cherokee XJ, 2.5 and 4.0 benz.

Below is a detailed list of models:

2.5 (EPE) 2469ccm 121KM / 89kW 1995 / 10-2001 / 09

2.5 SE (EPE) 2464ccm 118KM / 87kW 1996 / 10-1999 / 09

2.5 i 4x4 (EPE HX) 2469ccm 122KM / 90kW 1991 / 12-2001 / 09

4.0 i (MX) 3960ccm 184KM / 135kW 1999 / 02-2001 / 09

4.0 i (MX) 3964ccm 184KM / 135kW 1991 / 12-2001 / 09

4.0 i 4x4 (ERH) 3964ccm 178KM / 131kW 1995/01-2001/09

Muffler to be welded on in place of the original one. The diameter of the pipe, the dimensions of the muffler box and its length are selected so that the assembly of the silencer is as easy as possible.

Model: E002 / 60/450

The product is not homologated and cannot be approved for use on public roads in the EU.

End silencer BMW E39 M5 5.0...
RM Motors

End silencer BMW E39 M5 5.0 V8 2000-2003 to weld

EM002/63/350

393.00 zł
Availability: Out of stock

Muffler ready to weld in the place of the original one. Pipe diameter, dimensions of the muffler box and its length are selected in such a way so that the silencer assembly is as easy as possible.

A silencer with a straight-through construction, damped with stainless steel wool and a glass mat resistant to 800 degrees Celsius (glass mat made of full hair - we do not use scraps). Fully welded by welding robot, hand finished. Each element of the product is made using CNC technology. Crack-resistant embossed bottoms have been used.

Muffler dimensions:
Can length - 350 mm
Pipe diameter - 63.5 mm
Can dimensions - 100x180 mm

The product is not homologated and cannot be approved for use on public roads in the EU.