Main Page

Universal silencer based on aluminized construction of the box.
Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 2x76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 50 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe AUDI A4, A5 B8
2.0 TDI
2012-2015
120, 136, 143, 150, 163, 177, 190 bhp
FWD + Quattro
Pipe diameter - 63,5 mm

Downpipe AUDI A6 C7 2.0
2.0 TDI
2011-2014
177, 190 km
FWD + Quattro
Pipe diameter - 63,5 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe AUDI Q5 2.0 TDI
2.0 TDI
2012-2016
143, 150, 177, 190 km
FWD + Quattro
Pipe diameter - 63,5 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Brass threaded end cap
Thread - M12
Stroke - 1.25 mm
Type of material - brass

Mazda MX5 (ND)
2014-2019
Convertible/Coupe
1.5, 2.0l
131, 132, 160, 184 bhp
RWD

Pipe diameter - 63.5 mm

It is possible to choose a muffler with or without an electric valve.

The product is not homologated and cannot be approved for use on public roads in the EU.

Complete exhaust system for Skoda Octavia III RS 2.0 TSI

2.0 TSI

2013-2016

220/230 bhp

FWD

Downpipe diameter - 76mm

Exhaust pipe diameter - 63.5 mm

It is also possible to purchase the downpipe itself or the catback system itself.

The product is not homologated and cannot be approved for use on public roads in the EU.

Catback Skoda Octavia III RS 2.0 TSI

2.0 TSI

2013-2016

220/230 bhp

FWD

Exhaust pipe diameter - 63.5 mm

It is also possible to purchase the downpipe itself or a complete exhaust system.

The product is not homologated and cannot be approved for use on public roads in the EU.

Set of straight-through silencers with Vacuum Valve EV03
Box height/width - 130x220 mm
Valve type - Vacuum
Inlet/outlet diameter - 63,5 , 76 mm 

It is possible to select the appropriate tips:
For the silencer with a diameter of 63.5 mm - LINK
For silencer with a diameter of 76 mm - LINK

Downpipe BMW F10 LCI, F11 LCI, F07 GT LCI 
530dx, 535dx
N57N, N57Z
2012-2017 245, 258, 299, 313 bhp
xDrive
Downpipe suitable for vehicle equipped with a EURO 6 catalyst with SCR module (AdBlue).
Pipe diameter – 76 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Stainless steel pipe connector with a diameter of 50/63.5/76 mm 

Used to connect pipes of the same diameter in a straight section.
The tension springs used eliminate the welding process and make installation a lot easier.

Length of the connector with a diameter of 63.5/76 mm - 250 mm
Length of connector with a diameter of 50 mm - 260 mm

Downpipe Audi S3 8Y
2.0 TFSI 
2020-
310 bhp
AWD
Fits OPF versions

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

Possible options for configuring the kit are listed below.

The product is not homologated and cannot be approved for use on public roads in the EU.

Wheel scrapers - Can-Am Maverick X3 XRS designed for wheel size - 14 or 15 inches.
The set includes two scrapers - one for each of the rear wheels.

Silencer to exhaust tip.
Outlet diameter 89 mm (3,5")
Inlet diameter - 35 mm

Y-PIPE exhaust tee made of acid-proof steel.
Inlet diameter: 50, 60, 63.5, 70, 76 mm
Outlet 2x50 mm

The element can be used to join two exhaust pipes into one (V-type and Boxer engines), or to separate the exhaust into 2 mufflers.

RM Motors polished stainless steel beveled oval tip, choice with or without clamp.

Inner intake diameter - 51 / 63.5 mm
Tip width - 100 mm
Tip height - 77 mm
Overall length - 140 mm
Tip length - 105 mm
Bevel angle - 19°

Catback - Jeep Grand Cherokee V6 3.6L, V8 5.7L

2014-2021

V6 3.6L/V8 5.7L

286/352 bhp

Automatic

4x4

Exhaust pipe diameter - 63.5 mm 

Tip diameter - 63.5 mm inlet / 114 mm outlet

Below you can choose an end silencer with or without a valve and select the appropriate tips.

The product is not homologated and cannot be approved for use on public roads in the EU.

RM Motors polished stainless steel beveled oval tip, choice with or without clamp.

Inner intake diameter - 51 / 63.5 mm
Tip width - 100 mm
Tip height - 77 mm
Overall length - 140 mm
Tip length - 105 mm
Bevel angle - 19°

Downpipe AUDI A4 B7
1.9, 2.0 TDI
PD
2005-2008
115, 140 bhp
FWD + Quattro
Pipe diameter - 63,5 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe AUDI A6 C6
1.9, 2.0 TDI
2005-2008
136, 140, 170 bhp
FWD + Quattro
Pipe diameter - 63,5 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal straight-through silencer made of acid-resistant steel.
Height/width of the box - 70x139 mm
Length of the silencer box - 300 mm
Intake diameter - 60 mm
Length of intake pipe - 40 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Set of chamber silencers with electric valve EV05
Box height/width - 130x220 mm
Valve type - Electric

Length of the silencer box - 300 mm / 350 mm
Intake/exhaust diameter - 63.5 mm or 76 mm

It is possible to select the appropriate tips:
For the silencer - LINK

Catback AUDI S3 8Y Sedan
2020 -
2.0 TFSI
310 bhp
AWD

Pipe diameter - 76 mm
Exhaust tips with outer diameter - 101 mm

It is also possible to purchase the downpipe alone or a complete system.

Possible options for selecting the appropriate tip are listed below.

The product is not homologated and cannot be approved for use on public roads in the EU.