Downpipe Cupra Ateca 2.0 TSI 4Drive with catalyst 

2.0 TSI 
2020-
310 bhp
AWD
Fits OPF versions

Casting material - stainless steel AISI 316L
Wall thickness - 3 mm

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Possible options for configuring the kit are listed below.

Universal passage silencer made of stainless steel.

Damper can length - 400 mm
The width / height of the muffler can - 220/130 mm
Tip length - 250 mm
Tip diameter - 89 mm
Inlet pipe diameter - 50, 60, 63.5, 70, 76 mm
The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Muffler RM MOTORS JEEP COMMANDER V8 5.7 2006-2010

COMMANDER (XK, XH)

5.7 HEMI 4x4 (EZH) 5654ccm 347KM / 255kW 2009 / 06-2010 / 12

5.7 V8 4x4 (EZB) 5654ccm 326HP / 240kW 2005 / 09-2010 / 12

Muffler to be welded on in the place of the original one. The diameter of the pipe, the dimensions of the muffler box and its length are selected in such a way so that the assembly of the silencer is as easy as possible.

Model: E002 / 60/450

The product is not homologated and cannot be approved for use on public roads in the EU.

Wheel scrapers - Can-Am Maverick X3 XRS designed for wheel size - 14 or 15 inches.
The set includes two scrapers - one for each of the rear wheels.

The plow fits:

• TGB BLADE LTX 600 2021- 
• TGB BLADE LTX 1000 2023- 

Assembly instructions for plows:  YouTube - SQUDDE 

Plow fits Polaris 850/1000 Sportsman XP:

The full list can be found below:

Assembly instructions for plows: YouTube - SQUDDE 

Stainless steel pipe connector with a diameter of 50/63.5/76 mm 

Used to connect pipes of the same diameter in a straight section.
The tension springs used eliminate the welding process and make installation a lot easier.

Length of the connector with a diameter of 63.5/76 mm - 250 mm
Length of connector with a diameter of 50 mm - 260 mm

Downpipe Audi S3 8Y
2.0 TFSI 
2020-
310 bhp
AWD
Fits OPF versions

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

Possible options for configuring the kit are listed below.

The product is not homologated and cannot be approved for use on public roads in the EU.

Muffler dimensions:

Can height / width - 180x100 mm
The length of the silencer box - 250/300/350/400/450/500 mm
Inlet diameter - 50 / 60 / 63.5 / 70 mm

The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Exhaust valve Mercedes-Benz, Audi, BMW, Honda - 70 mm - 2.75"

Universal passage silencer made of stainless steel.

Can height / width - 130x220 mm
Damper can length - 250, 300, 350, 400, 450, 500 mm
Inlet diameter - 50, 60, 63.5, 70, 76, mm
Inlet pipe length - 50 mm
The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe Skoda Karoq
2.0 TSI 
2022-2023
190 km
AWD
Fits OPF versions

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Possible options for configuring the kit are listed below.

The plow fits:

• LONCIN XWOLF 700 2022+

Assembly instructions for plows: YouTube - SQUDDE

Universal muffler made of aluminized steel

One tip has a slight convexity, this does not affect the warranty and the life of the product.

Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 2x76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 50 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

The plow fits:

• CFMoto CForce 2019+
• CForce 800 XC
• CForce 850 XC
• CForce 1000 Overland 2021+

Assembly instructions for plows:  YouTube - SQUDDE 

Downpipe Decat for AUDI A4 S4 / Avant Quattro / Avant 3.0 TDI

3.0 TDI
2016-2021
286 hp
Quattro

Pipe diameter - 76 mm

There is a choice of versions:
without silencer, with a silencer or with catalytic converter

In addition, you can choose a version with or without a heat shield:

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe Cupra Ateca 2.0 TSI 4Drive with catalyst 

2.0 TSI 
2020-
310 bhp
AWD
Fits OPF versions

Casting material - stainless steel AISI 316L
Wall thickness - 3 mm

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Possible options for configuring the kit are listed below.

Universal passage silencer made of stainless steel.

Damper can length - 400 mm
The width / height of the muffler can - 220/130 mm
Tip length - 250 mm
Tip diameter - 89 mm
Inlet pipe diameter - 50, 60, 63.5, 70, 76 mm
The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Muffler RM MOTORS JEEP COMMANDER V8 5.7 2006-2010

COMMANDER (XK, XH)

5.7 HEMI 4x4 (EZH) 5654ccm 347KM / 255kW 2009 / 06-2010 / 12

5.7 V8 4x4 (EZB) 5654ccm 326HP / 240kW 2005 / 09-2010 / 12

Muffler to be welded on in the place of the original one. The diameter of the pipe, the dimensions of the muffler box and its length are selected in such a way so that the assembly of the silencer is as easy as possible.

Model: E002 / 60/450

The product is not homologated and cannot be approved for use on public roads in the EU.

Wheel scrapers - Can-Am Maverick X3 XRS designed for wheel size - 14 or 15 inches.
The set includes two scrapers - one for each of the rear wheels.

The plow fits:

• TGB BLADE LTX 600 2021- 
• TGB BLADE LTX 1000 2023- 

Assembly instructions for plows:  YouTube - SQUDDE