Stainless steel pipe connector with a diameter of 50/63.5/76 mm 

Used to connect pipes of the same diameter in a straight section.
The tension springs used eliminate the welding process and make installation a lot easier.

Length of the connector with a diameter of 63.5/76 mm - 250 mm
Length of connector with a diameter of 50 mm - 260 mm

Catback - Jeep Grand Cherokee V6 3.6L, V8 5.7L

2014-2021

V6 3.6L/V8 5.7L

286/352 bhp

Automatic

4x4

Exhaust pipe diameter - 63.5 mm 

Tip diameter - 63.5 mm inlet / 114 mm outlet

Below you can choose an end silencer with or without a valve and select the appropriate tips.

The product is not homologated and cannot be approved for use on public roads in the EU.

The plow fits:

• CFMoto 520L 2016-2022
• Goes Terrox 500

Assembly instructions for plows: YouTube - SQUDDE 

Can Am Maverick X3 Turbo sports exhaust with silencer
Downpipe fits X3, X RC TURBO RR, X3 Turbo R X RS versions.

2017-

Pipe diameter - 63.5 mm

The silencer mount has been designed with extreme care to provide maximum comfort and functionality for Can Am Maverick users.
With this solution, it is possible to easily mount the spare wheel at the rear of the vehicle, which is a great advantage in case of a breakdown while driving.

The product is not homologated and cannot be approved for use on public roads in the EU.

Satin stainless steel slanted exhaust tip without a clamp with a diffuser.

• Inner intake diameter - 63, 76 mm
• Diameter of the tip - 89, 101 mm 
• Total length of tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
• Tip length - 105 mm

The first photo shows the applied logo on the tip.

Downpipe Skoda Superb
2.0 TSI 
2020-
280 bhp
AWD
Fits OPF versions

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Possible options for configuring the kit are listed below.

RM Motors polished stainless steel beveled oval tip, choice with or without clamp.

Inner intake diameter - 51 / 63.5 mm
Tip width - 100 mm
Tip height - 77 mm
Overall length - 140 mm
Tip length - 105 mm
Bevel angle - 19°

Universal silencer based on aluminized construction of the box.

Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 63 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal passage silencer made of stainless steel.

Damper can length - 400 mm
The width / height of the muffler can - 220/130 mm
Tip length - 200 mm
Tip diameter - 89 mm
Inlet pipe diameter - 50, 63.5, 70, 76 mm
The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

GPF delete Hyundai i20N

1.6 T-GDi
2021-
204 bhp
FWD

Pipe diameter - 63.5 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe AUDI A4 S4 / Avant Quattro / Avant 3.0 TDI +heat shield

3.0 TDI
2016-2021
286 hp
Quattro

Pipe diameter - 76 mm

There is a choice of versions:
without silencer, with a silencer or with catalytic converter.

In addition, you can choose a version with or without a heat shield.

The product is not homologated and cannot be approved for use on public roads in the EU.

Satin stainless steel slanted exhaust tip without a clamp with a diffuser.

• Inner intake diameter - 63 mm
• Diameter of the tip - 89 m, 101 mm
• Total length of tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
• Tip length - 105 mm

The first photo shows the applied logo on the tip.

Fits:

• CF MOTO CFORCE 625 (2020-2024)

Stainless steel silencer with integrated damper 
Inlet/outlet diameter - 63,5 mm, 76 mm,
Height x width length of the silencer box - 130x220 mm
Length of the silencer box - 300/400/500 mm

Check also other silencers from our offer.

Downpipe Abarth 500 / 595 1.4T with catalytic converter
EURO 4 emission standard 
1,4T 
164, 177 bhp
2013-2016 
FWD

Pipe diameter - 76 mm 
Diameter at the connection point with the turbo - 70 mm
Diameter at the point of connection with the rest of the system - 56 mm 

Below it is possible to choose the appropriate catalyst capacity - 100 or 200 cpsi

The product is not homologated and cannot be approved for use on public roads in the EU.

Fits:

• CF MOTO CFORCE 850/1000 - production year 2024

Stainless steel pipe connector with a diameter of 50/63.5/76 mm 

Used to connect pipes of the same diameter in a straight section.
The tension springs used eliminate the welding process and make installation a lot easier.

Length of the connector with a diameter of 63.5/76 mm - 250 mm
Length of connector with a diameter of 50 mm - 260 mm

Catback - Jeep Grand Cherokee V6 3.6L, V8 5.7L

2014-2021

V6 3.6L/V8 5.7L

286/352 bhp

Automatic

4x4

Exhaust pipe diameter - 63.5 mm 

Tip diameter - 63.5 mm inlet / 114 mm outlet

Below you can choose an end silencer with or without a valve and select the appropriate tips.

The product is not homologated and cannot be approved for use on public roads in the EU.

The plow fits:

• CFMoto 520L 2016-2022
• Goes Terrox 500

Assembly instructions for plows: YouTube - SQUDDE 

Can Am Maverick X3 Turbo sports exhaust with silencer
Downpipe fits X3, X RC TURBO RR, X3 Turbo R X RS versions.

2017-

Pipe diameter - 63.5 mm

The silencer mount has been designed with extreme care to provide maximum comfort and functionality for Can Am Maverick users.
With this solution, it is possible to easily mount the spare wheel at the rear of the vehicle, which is a great advantage in case of a breakdown while driving.

The product is not homologated and cannot be approved for use on public roads in the EU.

Satin stainless steel slanted exhaust tip without a clamp with a diffuser.

• Inner intake diameter - 63, 76 mm
• Diameter of the tip - 89, 101 mm 
• Total length of tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
• Tip length - 105 mm

The first photo shows the applied logo on the tip.