DIMENSIONS: Length of the box - 250 - 600mm (every 50 mm)
Diameter of the box - 110/120/130/140/150/160 mm
Diameter of the inlet and inner pipe - 50/54/57/60/63,5/70/76 mm

The product is also available with an embossing inside to improve damping.
The embossing occurs from the 300 mm and longer versions.

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal passage silencer made of stainless steel.
Damper can length - 400 mm
The width / height of the muffler can - 220/130 mm
Length of ends - 250 mm
Tip diameter - 2x89 mm
Inlet pipe diameter - 2x50, 50, 63.5, 70, 76 mm
The product is also available in a version with an embossing inside the passage that improves damping.

DIMENSIONS: Length of the box - 650 - 950mm (every 50 mm)

Diameter of the box - 110/120/130/140/150/160 mm

Diameter of the inlet and inner pipe - 50/54/57/60/63,5/70/76 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal silencer based on aluminized construction of the box.

Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 2X50 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe Cupra Formentor 2.0 TSI with catalyst 
2.0 TSI 
2020-
310 bhp
AWD
Fits OPF versions

Casting material - stainless steel AISI 316L
Wall thickness - 3 mm

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Possible options for configuring the kit are listed below.

Downpipe Abarth 695 1.4T
1,4T 
162, 177 ps
2009-2017
FWD

Pipe diameter - 76 mm 
Diameter at the connection point with the turbo - 70 mm
Diameter at the point of connection with the rest of the system - 56 mm 

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe AUDI Q5 2.0 TDI
2.0 TDI
2012-2016
143, 150, 177, 190 km
FWD + Quattro
Pipe diameter - 63,5 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Satin stainless steel slanted exhaust tip without a clamp with a diffuser.

• Inner intake diameter - 63 mm
• Diameter of the tip - 89 m, 101 mm
• Total length of tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
• Tip length - 105 mm

The first photo shows the applied logo on the tip.

RM Motors polished stainless steel beveled oval tip, choice with or without clamp.

Inner intake diameter - 51 / 63.5 mm
Tip width - 100 mm
Tip height - 77 mm
Overall length - 140 mm
Tip length - 105 mm
Bevel angle - 19°

Universal silencer based on aluminized construction of the box.

Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 50 mm, 63,5 mm, 2x50 mm  

The product is not homologated and cannot be approved for use on public roads in the EU.

Catback Skoda Octavia III RS 2.0 TSI

2.0 TSI

2013-2016

220/230 bhp

FWD

Exhaust pipe diameter - 63.5 mm

It is also possible to purchase the downpipe itself or a complete exhaust system.

The product is not homologated and cannot be approved for use on public roads in the EU.

Front bumper with steel corners in black.

Fits:

• CF MOTO 520 2023+

Stainless steel pipe connector with a diameter of 50/63.5/76 mm 

Used to connect pipes of the same diameter in a straight section.
The tension springs used eliminate the welding process and make installation a lot easier.

Length of the connector with a diameter of 63.5/76 mm - 250 mm
Length of connector with a diameter of 50 mm - 260 mm

Downpipe AUDI A5 S5 / Cabriolet / Sportback / Coupe 3.0 TDI +heat shield

3.0 TDI
2016-2021
286 hp
Quattro

Pipe diameter - 76 mm

There is a choice of versions:
without silencer, with a silencer or with catalytic converter

In addition, you can choose a version with or without a heat shield:

The product is not homologated and cannot be approved for use on public roads in the EU.

RM Motors zip-up hoodie

•     80% ring-spun cotton; 20% polyester
•     simpler cut for a modern look
•     double-layer hood with a covered seam drawstring tunnel
•     covered seam on shoulders, cuffs, and hem
•     flat, wide ribbed cuffs with buttonholes
•     headphone access
•     fabric weight: 280 gsm

Available sizes: S-XL.

DIMENSIONS: Length of the box - 250 - 600mm (every 50 mm)
Diameter of the box - 110/120/130/140/150/160 mm
Diameter of the inlet and inner pipe - 50/54/57/60/63,5/70/76 mm

The product is also available with an embossing inside to improve damping.
The embossing occurs from the 300 mm and longer versions.

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal passage silencer made of stainless steel.
Damper can length - 400 mm
The width / height of the muffler can - 220/130 mm
Length of ends - 250 mm
Tip diameter - 2x89 mm
Inlet pipe diameter - 2x50, 50, 63.5, 70, 76 mm
The product is also available in a version with an embossing inside the passage that improves damping.

DIMENSIONS: Length of the box - 650 - 950mm (every 50 mm)

Diameter of the box - 110/120/130/140/150/160 mm

Diameter of the inlet and inner pipe - 50/54/57/60/63,5/70/76 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal silencer based on aluminized construction of the box.

Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 2X50 mm

The product is not homologated and cannot be approved for use on public roads in the EU.