Downpipe Cupra Formentor 2.0 TSI

2.0 TSI 
2021-2022
310 bhp
4Drive

Fits OPF versions

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Possible options for configuring the kit are listed below.

Downpipe AUDI A6 C7 2.0
2.0 TDI
2011-2014
177, 190 km
FWD + Quattro
Pipe diameter - 63,5 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe TOYOTA Yaris GR 1.6
1,6
2020-2023
261 km
AWD
Downpipe diameter - 76 mm

The kit does not include mounting screws and gaskets.

NOT COMPATIBLE WITH THE POST-LIFT VERSION.

It is possible to buy another part of the system - CATBACK TOYOTA YARIS GR

The product is not homologated and cannot be approved for use on public roads in the EU.

All possible downpipe configuration options can be found below.

Downpipe Volkswagen Arteon 2.0 TSI with catalyst 

2.0 TSI 
2020-
310 bhp
AWD
Fits OPF versions

Casting material - stainless steel AISI 316L
Wall thickness - 3 mm

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Possible options for configuring the kit are listed below.

RM Motors polished stainless steel slanted oval tip with welded diffuser, choice with or without clamp.

Inner intake diameter - 51 / 63.5 mm
Tip width - 100 mm
Tip height - 77 mm
Overall length - 140 mm
Tip length - 105 mm
Bevel angle - 19°

Universal passage silencer made of stainless steel.
Damper can length - 400 mm
The width / height of the muffler can - 220/130 mm
Length of ends - 150 mm
Tip diameter - 2x63.5 mm
Inlet pipe diameter - 2x50, 50, 63.5, 70, 76 mm
The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Catback MINI Cooper S F56 LCI JCW B48D
2022 -
2.0l 
B48D 
231 km
FWD
Fits OPF version


Exhaust pipe diameter - 63.5 mm 2,5" (on closed flap)
Exhaust pipe diameter - 76 mm / 3" (on open flap) 


It is also possible to purchase the downpipe itself or a complete exhaust system.

The product is not homologated and cannot be approved for use on public roads in the EU.

Muffler RM MOTORS JEEP COMMANDER V8 5.7 2006-2010

COMMANDER (XK, XH)

5.7 HEMI 4x4 (EZH) 5654ccm 347KM / 255kW 2009 / 06-2010 / 12

5.7 V8 4x4 (EZB) 5654ccm 326HP / 240kW 2005 / 09-2010 / 12

Muffler to be welded on in the place of the original one. The diameter of the pipe, the dimensions of the muffler box and its length are selected in such a way so that the assembly of the silencer is as easy as possible.

Model: E002 / 60/450

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe AUDI Q5 2.0 TDI
2.0 TDI
2012-2016
143, 150, 177, 190 km
FWD + Quattro
Pipe diameter - 63,5 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Polished stainless steel tip available with or without clamp.

Intake diameter inside - 50 / 63,5 / 76 mm
Diameter of the tip - 76 / 89 / 101 mm
Total length of the tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
Tip length - 105 mm

Downpipe Cupra Leon ST (Sportstourer) 2.0 TSI with catalyst 

2.0 TSI 
2020-
310 bhp
AWD
Fits OPF versions

Casting material - stainless steel AISI 316L
Wall thickness - 3 mm

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Possible options for configuring the kit are listed below.

Polished stainless steel tip available with or without clamp.

Intake diameter inside - 50 / 63,5 / 76 mm
Diameter of the tip - 76  / 89 / 101 mm
Total length of the tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
Tip length - 105 mm

Downpipe AUDI A4 Avant Quattro / S4 2.0 TFSI +heat shield

2.0 TFSI 
2016-2021
245 km
Quattro

Pipe diameter - 76 mm

There is a choice of versions:
without silencer, with a silencer or with catalytic converter

In addition, you can choose a version with or without a heat shield:

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe BMW G20 G21

330i, 330e, 330i, 330e, 330eX, 530e, 530eX

2018--
255 bhp

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal passage silencer made of stainless steel.

Damper can length - 400 mm
The width / height of the muffler can - 220/130 mm
Tip length - 250 mm
Tip diameter - 89 mm
Inlet pipe diameter - 50, 60, 63.5, 70, 76 mm
The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Muffler to weld in the place of the original one. Pipe diameter, dimensions of the muffler box and its length are selected in such a way as so that the silencer assembly is as easy as possible.

A silencer with a straight-through construction, damped with stainless steel wool and a glass mat resistant to 800 degrees Celsius (glass mat made of full hair - we do not use scraps). Fully welded by welding robot, hand finished. Each element of the product is made using CNC technology. Crack-resistant embossed bottoms have been used.

Muffler dimensions:
Can length - 450 mm
Pipe diameter - 50 mm
Can diameter - 150 mm

The product is not homologated and cannot be approved for use on public roads in the EU.