Downpipe Skoda Superb 2.0 TSI with catalyst 

2.0 TSI 
2020-
310 bhp
AWD
Fits OPF versions

Casting material - stainless steel AISI 316L
Wall thickness - 3 mm

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Possible options for configuring the kit are listed below.

Banners are printed on one side using CMYK solvent duct technology. Printing is done in 1080 DPI resolution. The banner is welded without wrinkles all around to strengthen the edges (weld width 25-30 mm). The banner is machine welded with galvanized stainless steel eyelets. Coated banner - 510 g/m2. It is characterized by high quality white, and increased durability (1000x1000 fibers). Additional advantage is the matte finish of this banner - does not give light reflections.
The banner is sold separately, without a frame.

RM Motors zip-up hoodie

•     80% ring-spun cotton; 20% polyester
•     simpler cut for a modern look
•     double-layer hood with a covered seam drawstring tunnel
•     covered seam on shoulders, cuffs, and hem
•     flat, wide ribbed cuffs with buttonholes
•     headphone access
•     fabric weight: 280 gsm

Available sizes: S-XL.

Satin stainless steel slanted exhaust tip without a clamp with a diffuser.

• Inner intake diameter - 63 mm
• Diameter of the tip - 89 m, 101 mm
• Total length of tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
• Tip length - 105 mm

The first photo shows the applied logo on the tip.

DIMENSIONS: Length of the box - 250 - 600mm (every 50 mm)
Diameter of the box - 110/120/130/140/150/160 mm
Diameter of the inlet and inner pipe - 50/54/57/60/63,5/70/76 mm

The product is also available with an embossing inside to improve damping.
The embossing occurs from the 300 mm and longer versions.

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal silencer based on aluminized construction of the box.

Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 50 mm, 63,5 mm, 2x50 mm  

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal through-hole muffler made of acid-resistant steel with embossing.
Silencer has a visible deformation, fully operational and ready to use, comes with 24 months warranty.

Height/width of the box - 130x220 mm
Length of the silencer can - 300 mm
Diameter of the intake - 63.5 mm
Length of intake pipe - 50 mm

Downpipe BMW G20 330e, 320iX, 330iX
B48
Plug-in hybrid
2018-2021
184, 258, 292 bhp
RWD

Średnica rury - 88,9 mm
Średnica rury w miejscu łączenia z sekcją środkową - 80 mm

Downpipe BMW X6 F16 M50d
2014-2019
381 bhp

Pipe diameter - 88,9 mm

Downpipe fits version originally equipped with catalytic converter with EURO 6 standard.

The product is not homologated and cannot be approved for use on public roads in the EU

Mazda MX5 (ND)
2014-2019
Convertible/Coupe
1.5, 2.0l
131, 132, 160, 184 bhp
RWD

Pipe diameter - 63.5 mm

It is possible to choose a muffler with or without an electric valve.

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe Abarth 695 1.4T
1,4T 
162, 177 ps
2009-2017
FWD

Pipe diameter - 76 mm 
Diameter at the connection point with the turbo - 70 mm
Diameter at the point of connection with the rest of the system - 56 mm 

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal passage silencer made of stainless steel.

Silencer can length - 400 mm
The width / height of the muffler can - 220/130 mm
The diameter of the intake pipe - 63.5, 70, 76 mm
The diameter of exhaust tips - 2x76
The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Muffler ready to weld in the place of the original one. Pipe diameter, dimensions of the muffler box and its length are selected in such a way so that the silencer assembly is as easy as possible.

A silencer with a straight-through construction, damped with stainless steel wool and a glass mat resistant to 800 degrees Celsius (glass mat made of full hair - we do not use scraps). Fully welded by welding robot, hand finished. Each element of the product is made using CNC technology. Crack-resistant embossed bottoms have been used.

Muffler dimensions:

Can length - 350 mm
Pipe diameter - 63.5 mm
Can diameter - 130 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal silencer based on aluminized construction of the box.
Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 63,5 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal passage silencer made of stainless steel.

Can height / width – 130×220 mm
Damper can length – 300, 350, 400, 450, 500 mm
Inlet diameter – 50, 60, 63.5, 70, 76, mm
Inlet pipe length – 50 mm
Outlet diameter – 2×50 mm

The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal silencer based on aluminized construction of the box.

Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 50 mm, 63,5 mm, 2x50 mm  

The product is not homologated and cannot be approved for use on public roads in the EU.