Downpipe Skoda Superb
2.0 TSI 
2020-
280 bhp
AWD
Fits OPF versions

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Possible options for configuring the kit are listed below.

Downpipe AUDI RS4 B9, RS5 B9
2,9 TFSI
2018-
450 bhp
Quattro

Inlet diameter - 114 mm 
Outlet diameter - 76 mm 

Possible options for configuring the kit are listed below.

The product is not homologated and cannot be approved for use on public roads in the EU.

The plow fits:

• CFMoto 520L 2016-2022

Assembly instructions for plows: YouTube - SQUDDE 

Downpipe Volkswagen Tiguan II R 2.0 TSI with catalyst 

2.0 TSI 
2020-
310 bhp
AWD
Fits OPF versions

Casting material - stainless steel AISI 316L
Wall thickness - 3 mm

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Possible options for configuring the kit are listed below.

Universal passage silencer made of stainless steel.

Damper can length - 400 mm
The width / height of the muffler can - 220/130 mm
Length of ends - 250 mm
Tip diameter - 2x76 mm
Inlet pipe diameter - 2x50, 50, 60, 63.5, 70, 76 mm

The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

The plow fits:

• LINHAI 550L
  
  Assembly instructions for plows: YouTube - SQUDDE 
  

Catback - Jeep Grand Cherokee V6 3.6L, V8 5.7L

2014-2021

V6 3.6L/V8 5.7L

286/352 bhp

Automatic

4x4

Exhaust pipe diameter - 63.5 mm 

Tip diameter - 63.5 mm inlet / 114 mm outlet

Below you can choose an end silencer with or without a valve and select the appropriate tips.

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal silencer based on aluminized construction of the box.
Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 50 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Set of straight-through silencers with electric valve EV03
Box height/width - 130x220 mm
Valve type - Electric
Inlet/outlet diameter - 63,5 , 76 mm 

It is possible to select the appropriate tips:
For the silencer with a diameter of 63.5 mm - LINK
For silencer with a diameter of 76 mm - LINK

Universal straight-through silencer made of acid-resistant steel.
Height/width of the box - 70x139 mm
Length of the silencer box - 300 mm
Intake diameter - 60 mm
Length of intake pipe - 40 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Polished stainless steel tip available with or without clamp.

Intake diameter inside - 50 / 63,5 / 76 mm
Diameter of the tip - 76  / 89 / 101 mm
Total length of the tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
Tip length - 105 mm

Satin stainless steel slanted exhaust tip without a clamp with a diffuser.

• Inner intake diameter - 50 mm
• Diameter of the tip - 76 mm 
• Total length of tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
• Tip length - 105 mm

The first photo shows the applied logo on the tip.

Downpipe SUBARU Impreza Mk3 2.5 WRX STI
2.5
2008-2014
300 bhp
AWD

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal silencer based on aluminized construction of the box.

Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 50 mm, 63,5 mm, 2x50 mm  

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal silencer based on aluminized construction of the box.
Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 2x76 mm
Diameter of the inlet - 50 mm, 2x50 mm, 63 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Banners are printed on one side using CMYK solvent duct technology. Printing is done in 1080 DPI resolution. The banner is welded without wrinkles all around to strengthen the edges (weld width 25-30 mm). The banner is machine welded with galvanized stainless steel eyelets. Coated banner - 510 g/m2. It is characterized by high quality white, and increased durability (1000x1000 fibers). Additional advantage is the matte finish of this banner - does not give light reflections.
The banner is sold separately, without a frame.