Downpipe Fiat Grande Punto 1.4T with catalytic converter
EURO 4 emission standard 
1,4T 
135 bhp
2012-2015
FWD

Pipe diameter - 76 mm 
Diameter at the connection point with the turbo - 70 mm
Diameter at the point of connection with the rest of the system - 56 mm 

The product is not homologated and cannot be approved for use on public roads in the EU.

Below it is possible to choose the appropriate catalyst capacity - 100 or 200 cpsi

Downpipe Cupra Ateca 2.0 TSI 4Drive with catalyst 

2.0 TSI 
2020-
310 bhp
AWD
Fits OPF versions

Casting material - stainless steel AISI 316L
Wall thickness - 3 mm

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Possible options for configuring the kit are listed below.

Downpipe AUDI A7 SPORTBACK
2.0 TFSI
2015-2016
252 bhp
Quattro
Pipe diameter - 76 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Satin stainless steel straight tip with welded diffuser, available with or without clamp.

Intake diameter inside - 50 / 63,5 / 76 mm
Diameter of the tip - 76 / 89 / 101 mm
Total length of the tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
Tip length - 105 mm

GPF delete Hyundai Tucson (TL, TLE)
1.6 T-GDi
2015-2020
177 bhp
AWD

Pipe diameter - 63.5 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Banners are printed on one side using CMYK solvent duct technology. Printing is done in 1080 DPI resolution. The banner is welded without wrinkles all around to strengthen the edges (weld width 25-30 mm). The banner is machine welded with galvanized stainless steel eyelets. Coated banner - 510 g/m2. It is characterized by high quality white, and increased durability (1000x1000 fibers). Additional advantage is the matte finish of this banner - does not give light reflections.
The banner is sold separately, without a frame.

RM Motors Cap 

Available sizes are listed below:

Universal silencer based on aluminized construction of the box.

Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 50 mm, 63,5 mm, 2x50 mm  

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe fits version originally equipped with catalytic converter with EURO 6 standard.
BMW G30 540d B57
2016 - 
340 bhp
Pipe diameter - 80 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe Fiat Grande Punto 1.4T
1,4T 
135 bhp
2012-2015
FWD

Pipe diameter - 76 mm 
Diameter at the connection point with the turbo - 70 mm
Diameter at the point of connection with the rest of the system - 56 mm 

The product is not homologated and cannot be approved for use on public roads in the EU.

RM Motors slanted oval tip in satin stainless steel with welded diffuser, choice with or without clamp.

Inner intake diameter - 51 / 63.5 mm
Tip width - 100 mm
Tip height - 77 mm
Overall length - 140 mm
Tip length - 105 mm
Bevel angle - 19°

Universal silencer based on aluminized construction of the box.

Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 50 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Stainless steel pipe connector with a diameter of 50/63.5/76 mm 

Used to connect pipes of the same diameter in a straight section.
The tension springs used eliminate the welding process and make installation a lot easier.

Length of the connector with a diameter of 63.5/76 mm - 250 mm
Length of connector with a diameter of 50 mm - 260 mm

Straight-through silencer with Vacuum Valve EV03
Box height/width - 130x220 mm
Valve type - Vacuum
Inlet/outlet diameter - 63,5 , 76 mm 

It is possible to select the appropriate tips:
For the silencer with a diameter of 63.5 mm - LINK
For silencer with a diameter of 76 mm - LINK

Stainless steel silencer with integrated damper 
Inlet/outlet diameter - 63,5 mm, 76 mm,
Height x width length of the silencer box - 130x220 mm
Length of the silencer box - 300/400/500 mm

Check also other silencers from our offer.

Downpipe AUDI A7 SPORTBACK 2.0 TFSI +heat shield

2.0 TFSI 
2020-2021
245 km
Quattro

Pipe diameter - 76 mm

There is a choice of versions:
without silencer, with a silencer or with catalytic converter

In addition, you can choose a version with or without a heat shield:

The product is not homologated and cannot be approved for use on public roads in the EU.