RM Motors zip-up hoodie

•     80% ring-spun cotton; 20% polyester
•     simpler cut for a modern look
•     double-layer hood with a covered seam drawstring tunnel
•     covered seam on shoulders, cuffs, and hem
•     flat, wide ribbed cuffs with buttonholes
•     headphone access
•     fabric weight: 280 gsm

Available sizes: S-XL.

Muffler dimensions: Can height / width - 180x100 mm

The length of the silencer box - 250/300/350/400/450/500 mm
Inlet diameter - 50/60 / 63.5 / 70/76 mm
Outlet diameter - 2x50 mm

The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe AUDI A6 C8 Avant Quattro / S6 2.0 TFSI +heat shield

2.0 TFSI 
2019-2021
265 km
Quattro

Pipe diameter - 76 mm

There is a choice of versions:
without silencer, with a silencer or with catalytic converter

In addition, you can choose a version with or without a heat shield:

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal silencer based on aluminized construction of the box.
Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 2x76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 50 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Plow fits Polaris 1000 S:

• 2023, 2020 Scrambler XP 1000 S
• 2022-2023, 2020 Sportsman XP 1000 S
• 2022 Scrambler XP 1000 S Limited Edition
• 2022 INTL Sportsman XP 1000 EPS
• 2021 Sportsman® XP 1000 S
• 2021 Scrambler® XP 1000 S
• 2021 INTL Sportsman® XP 1000 S EPS
• 2021 INTL Scrambler® XP 1000 S EPS
• 2021 INTL Scrambler® 1000 S EPS

Assembly instructions for plows:  YouTube - SQUDDE 

Universal passage silencer made of stainless steel.

Can height / width – 130×220 mm
Damper can length – 250, 300, 350, 400, 450, 500 mm
Inlet diameter – 50, 60, 63.5, 70, 76, mm
Inlet pipe length – 50 mm
The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

RM03 stainless steel sport through silencer

Length of the can - 450 mm

Diameter of the can - 125 mm

Diameter of intake/gully - 54 mm

Downpipe made for:

• Porsche Macan 2.0 TFSI
• Audi A4 (B8) 2.0 TFSI
• Audi Q5 (8RB) 2.0 TFSI

Men's T-shirt

Size is understated, we advise you to choose a larger size.

Polished stainless steel tip available with or without clamp.

Intake diameter inside - 50 / 63,5 / 76 mm
Diameter of the tip - 76 / 89 / 101 mm
Total length of the tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
Tip length - 105 mm

Universal chamber silencer with electric valve

Length of the silencer box - 300 mm

Intake diameter - 63.5 mm

Height/width of the box - 130x220 mm

Length of the outlet pipe - 140 mm

The silencer does not include the control panel in the set.

The muffler is fully operational and ready to use, comes with 24 months warranty.

Universal passage silencer made of stainless steel.

Can height / width – 130×220 mm
Damper can length – 300, 350, 400, 450, 500 mm
Inlet diameter – 50, 60, 63.5, 70, 76, mm
Inlet pipe length – 50 mm
Outlet diameter – 2×50 mm

The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe Cupra Formentor 2.0 TSI
2.0 TSI 
2020-
310 bhp
AWD
Fits OPF versions

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Possible options for configuring the kit are listed below.

BMW 2"/2.25"/2.5"/2.75"/3" exhaust throttle actuator
OE number: 18307851568

Universal silencer based on aluminized construction of the box.
Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 50 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Muffler dimensions:

Can height / width - 180x100 mm
The length of the silencer box - 250/300/350/400/450/500 mm
Inlet diameter - 50/60 / 63.5 / 70/76 mm

The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.