Downpipe AUDI A5 S5 / Cabriolet / Sportback / Coupe 3.0 TDI +heat shield

3.0 TDI
2016-2021
286 hp
Quattro

Pipe diameter - 76 mm

There is a choice of versions:
without silencer, with a silencer or with catalytic converter

In addition, you can choose a version with or without a heat shield:

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal passage silencer made of stainless steel.

Can height / width – 130×220 mm
Damper can length – 300, 350, 400, 450, 500 mm
Inlet diameter – 50, 60, 63.5, 70, 76, mm
Inlet pipe length – 50 mm
Outlet diameter – 2×50 mm
The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe AUDI A4 Avant Quattro / S4 2.0 TFSI +heat shield

2.0 TFSI 
2016-2021
245 km
Quattro

Pipe diameter - 76 mm

There is a choice of versions:
without silencer, with a silencer or with catalytic converter

In addition, you can choose a version with or without a heat shield:

The product is not homologated and cannot be approved for use on public roads in the EU.

Muffler dimensions: Can height / width - 180x100 mm

The length of the silencer box - 250/300/350/400/450/500 mm
Inlet diameter - 50/60 / 63.5 / 70/76 mm
Outlet diameter - 2x50 mm

The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal muffler made of aluminized steel

One tip has a slight convexity, this does not affect the warranty and the life of the product.

Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 2x76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 50 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Catback Skoda Octavia III RS 2.0 TSI

2.0 TSI

2013-2016

220/230 bhp

FWD

Exhaust pipe diameter - 63.5 mm

It is also possible to purchase the downpipe itself or a complete exhaust system.

The product is not homologated and cannot be approved for use on public roads in the EU.

Complete exhaust system for Skoda Octavia III RS 2.0 TSI

2.0 TSI

2013-2016

220/230 bhp

FWD

Downpipe diameter - 76mm

Exhaust pipe diameter - 63.5 mm

It is also possible to purchase the downpipe itself or the catback system itself.

The product is not homologated and cannot be approved for use on public roads in the EU.

Mazda MX5 (ND)
2014-2019
Convertible/Coupe
1.5, 2.0l
131, 132, 160, 184 bhp
RWD

Pipe diameter - 63.5 mm

It is possible to choose a muffler with or without an electric valve.

The product is not homologated and cannot be approved for use on public roads in the EU.

Set of straight-through silencers with electric valve EV03
Box height/width - 130x220 mm
Valve type - Electric
Inlet/outlet diameter - 63,5 , 76 mm 

It is possible to select the appropriate tips:
For the silencer with a diameter of 63.5 mm - LINK
For silencer with a diameter of 76 mm - LINK

Downpipe Cupra Ateca 2.0 TSI 4Drive with catalyst 

2.0 TSI 
2020-
310 bhp
AWD
Fits OPF versions

Casting material - stainless steel AISI 316L
Wall thickness - 3 mm

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Possible options for configuring the kit are listed below.

Universal silencer based on aluminized construction of the box.

Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 2x76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 50 mm, 63,5 mm, 2x50 mm  

The product is not homologated and cannot be approved for use on public roads in the EU.

The plow fits:

• LINHAI 550L
  
  Assembly instructions for plows: YouTube - SQUDDE 
  

Universal passage silencer made of stainless steel.

Can height / width – 130×220 mm
Damper can length – 250, 300, 350, 400, 450, 500 mm
Inlet diameter – 50, 60, 63.5, 70, 76, mm
Inlet pipe length – 50 mm
The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Satin stainless steel slanted exhaust tip without a clamp with a diffuser.

• Inner intake diameter - 50, 63 mm
• Diameter of the tip - 76 mm 
• Total length of tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
• Tip length - 105 mm

The first photo shows the applied logo on the tip.

Downpipe TOYOTA Yaris GR 1.6
1,6
2020-
261 km
AWD
Downpipe diameter - 76 mm

The kit does not include mounting screws and gaskets.

It is possible to buy another part of the system - CATBACK TOYOTA YARIS GR

The product is not homologated and cannot be approved for use on public roads in the EU.

All possible downpipe configuration options can be found below.

RM Motors polished stainless steel beveled oval tip, choice with or without clamp.

Inner intake diameter - 51 / 63.5 mm
Tip width - 100 mm
Tip height - 77 mm
Overall length - 140 mm
Tip length - 105 mm
Bevel angle - 19°