Universal silencer based on aluminized construction of the box.
Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 50 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

ODES Pathcross QUAD PLANE - SQUDDE

2021-

The plow fits capacities:
650 / 850 / 1000 

Plough assembly instructions: YouTube - SQUDDE 

Banners are printed on one side using CMYK solvent duct technology. Printing is done in 1080 DPI resolution. The banner is welded without wrinkles all around to strengthen the edges (weld width 25-30 mm). The banner is machine welded with galvanized stainless steel eyelets. Coated banner - 510 g/m2. It is characterized by high quality white, and increased durability (1000x1000 fibers). Additional advantage is the matte finish of this banner - does not give light reflections.
The banner is sold separately, without a frame.

Banners are printed on one side using CMYK solvent duct technology. Printing is done in 1080 DPI resolution. The banner is welded without wrinkles all around to strengthen the edges (weld width 25-30 mm). The banner is machine welded with galvanized stainless steel eyelets. Coated banner - 510 g/m2. It is characterized by high quality white, and increased durability (1000x1000 fibers). Additional advantage is the matte finish of this banner - does not give light reflections.
The banner is sold separately, without a frame.

Downpipe Fiat 500X 1.4T with catalytic converter
EURO 4 emission standard 
1,4T 
170 bhp
2015-2018
FWD

Pipe diameter - 76 mm 
Diameter at the connection point with the turbo - 70 mm
Diameter at the point of connection with the rest of the system - 56 mm 

The product is not homologated and cannot be approved for use on public roads in the EU.

Below it is possible to choose the appropriate catalyst capacity - 100 or 200 cpsi

Catback - Jeep Grand Cherokee V6 3.6L, V8 5.7L

2014-2021

V6 3.6L/V8 5.7L

286/352 bhp

Automatic

4x4

Exhaust pipe diameter - 63.5 mm 

Tip diameter - 63.5 mm inlet / 114 mm outlet

Below you can choose an end silencer with or without a valve and select the appropriate tips.

The product is not homologated and cannot be approved for use on public roads in the EU.

Stainless steel pipe connector with a diameter of 50/63.5/76 mm 

Used to connect pipes of the same diameter in a straight section.
The tension springs used eliminate the welding process and make installation a lot easier.

Length of the connector with a diameter of 63.5/76 mm - 250 mm
Length of connector with a diameter of 50 mm - 260 mm

Downpipe set Volkswagen Golf VIII 2.0 TDI GTD +heat shield

2.0 TDI
2019-
200 hp

Pipe diameter - 76 mm
DPF OFF diameter - 63 mm

There is a choice of versions:
without silencer, with a silencer or with catalytic converter

In addition, you can choose a version with or without a heat shield:

The product is not homologated and cannot be approved for use on public roads in the EU.

GPF delete Kia Sportage V

1.6 T-GDi
2021-
204 bhp
FWD

Pipe diameter - 63.5 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal passage silencer made of stainless steel.

Damper can length - 400 mm
The width / height of the muffler can - 220/130 mm
Length of ends - 250 mm
Tip diameter - 2x76 mm
Inlet pipe diameter - 2x50, 50, 60, 63.5, 70, 76 mm
The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal silencer based on aluminized construction of the box.

Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 2X50 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Polished stainless steel tip available with or without clamp.

Intake diameter inside - 50 / 63,5 / 76 mm
Diameter of the tip - 76 / 89 / 101 mm
Total length of the tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
Tip length - 105 mm

Straight-through silencer with Vacuum Valve EV03
Box height/width - 130x220 mm
Valve type - Vacuum
Inlet/outlet diameter - 63,5 , 76 mm 

It is possible to select the appropriate tips:
For the silencer with a diameter of 63.5 mm - LINK
For silencer with a diameter of 76 mm - LINK

Downpipe BMW G20 330e, 320iX, 330iX
B48
Plug-in hybrid
2018-2021
184, 258, 292 bhp
RWD

Średnica rury - 88,9 mm
Średnica rury w miejscu łączenia z sekcją środkową - 80 mm

Downpipe Lancia Delta 1.4T
1,4T 
120, 150 bhp
2008-2012 
FWD

Pipe diameter - 76 mm
Diameter at the connection point with the turbo - 70 mm
Diameter at the connection point with the downpipe - 56 mm 

The product is not homologated and cannot be approved for use on public roads in the EU.

Men's kangaroo sweatshirt

•     65% cotton, 35% polyester
•     straight cut with side seams
•     hood with lining with drawstring
•     inner back hem reinforced with a colorful strip from the outer material
•     kangaroo pocket
•     bottom hem and sleeve cuffs made of 2:2 rib knit with 5% elastane
•     combed inner side
•     Label: woven

Sizing is understated, we advise you to choose a larger size.

Universal silencer based on aluminized construction of the box.
Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 50 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

ODES Pathcross QUAD PLANE - SQUDDE

2021-

The plow fits capacities:
650 / 850 / 1000 

Plough assembly instructions: YouTube - SQUDDE 

Banners are printed on one side using CMYK solvent duct technology. Printing is done in 1080 DPI resolution. The banner is welded without wrinkles all around to strengthen the edges (weld width 25-30 mm). The banner is machine welded with galvanized stainless steel eyelets. Coated banner - 510 g/m2. It is characterized by high quality white, and increased durability (1000x1000 fibers). Additional advantage is the matte finish of this banner - does not give light reflections.
The banner is sold separately, without a frame.

Banners are printed on one side using CMYK solvent duct technology. Printing is done in 1080 DPI resolution. The banner is welded without wrinkles all around to strengthen the edges (weld width 25-30 mm). The banner is machine welded with galvanized stainless steel eyelets. Coated banner - 510 g/m2. It is characterized by high quality white, and increased durability (1000x1000 fibers). Additional advantage is the matte finish of this banner - does not give light reflections.
The banner is sold separately, without a frame.

Downpipe Fiat 500X 1.4T with catalytic converter
EURO 4 emission standard 
1,4T 
170 bhp
2015-2018
FWD

Pipe diameter - 76 mm 
Diameter at the connection point with the turbo - 70 mm
Diameter at the point of connection with the rest of the system - 56 mm 

The product is not homologated and cannot be approved for use on public roads in the EU.

Below it is possible to choose the appropriate catalyst capacity - 100 or 200 cpsi