Satin stainless steel straight tip with welded diffuser, available with or without clamp.

Intake diameter inside - 50 / 63,5 / 76 mm
Diameter of the tip - 76 / 89 / 101 mm
Total length of the tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
Tip length - 105 mm

Downpipe Cupra Formentor 2.0 TSI

2.0 TSI 
2021-2022
310 bhp
4Drive

Fits OPF versions

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Possible options for configuring the kit are listed below.

Complete RM Motors exhaust system for Seat Leon Cupra 3 (hatchback)
2.0 TSI
2013-
300 bhp
FWD

Pipe diameter - 76 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe BMW F15 N57N, N57Z

Downpipe suitable for vehicle equipped with a EURO 6 catalyst with SCR module (AdBlue).

x5
30dx, 40dx
2012-2017
258, 313 bhp

Pipe diameter - 76 mm
Pipe diameter at the point of the connection with a middle section - 70 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal passage silencer made of stainless steel.
Damper can length - 400 mm
The width / height of the muffler can - 220/130 mm
Length of ends - 150 mm
Tip diameter - 2x63.5 mm
Inlet pipe diameter - 2x50, 50, 63.5, 70, 76 mm
The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal silencer based on aluminized construction of the box.

Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 50 mm, 63,5 mm, 2x50 mm  

The product is not homologated and cannot be approved for use on public roads in the EU.

Catback Hyundai i20N 1.6 T-GDi

1.6 T-GDi
2021-
204 bhp
FWD

Pipe diameter - 63,5 mm

It is also possible to purchase the downpipe or the GPF delete by itself.

Below you can choose the suitable exhaust tips:

The product is not homologated and cannot be approved for use on public roads in the EU.

The plow fits:

• CFMoto 520L 2016-2022
• Goes Terrox 500

Assembly instructions for plows: YouTube - SQUDDE 

Universal passage silencer made of stainless steel.

Can height / width - 130x220 mm
Damper can length - 250, 300, 350, 400, 450, 500 mm
Inlet diameter - 50, 60, 63.5, 70, 76, mm
Inlet pipe length - 50 mm
The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe set for AUDI A4 S4 / Avant Quattro / Avant 3.0 TDI +heat shield

3.0 TDI
2016-2021
286 hp
Quattro

Pipe diameter - 76 mm

There is a choice of versions:
without silencer, with a silencer or with catalytic converter.

In addition, you can choose a version with or without a heat shield.

The product is not homologated and cannot be approved for use on public roads in the EU.

Complete RM Motors exhaust system for Seat Leon Cupra mk 3 (hatchback)
2.0 TSI
2013-
300 bhp
FWD

Pipe diameter - 76 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Men's T-Shirt - RM Motors

• Material: 100% cotton
• Weight: 320 gsm
• Sizes: S, M, L, XL, XXL
• Label: woven
• Color: black
• Garment marking method: thermal transfer

Below you can see all available sizes:

Satin stainless steel slanted exhaust tip without a clamp with a diffuser.

• Inner intake diameter - 63 mm
• Diameter of the tip - 89 m, 101 mm
• Total length of tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
• Tip length - 105 mm

The first photo shows the applied logo on the tip.

Stainless steel muffler

Muffler dimensions:
Width/height of silencer box - 220/130 mm
Length of the muffler box - 400/500 mm
Inlet diameter - 63.5 / 76 mm
Outlet diameter - 2x50 / 2x63.5 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal passage silencer made of stainless steel.

Damper can length - 400 mm
The width / height of the muffler can - 220/130 mm
Tip length - 200 mm
Tip diameter - 89 mm
Inlet pipe diameter - 50, 63.5, 70, 76 mm
The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.