Downpipe set Volkswagen Golf VIII 2.0 TDI GTD +heat shield

2.0 TDI
2019-
200 hp

Pipe diameter - 76 mm
DPF OFF diameter - 63 mm

There is a choice of versions:
without silencer, with a silencer or with catalytic converter

In addition, you can choose a version with or without a heat shield:

The product is not homologated and cannot be approved for use on public roads in the EU.

A stainless steel silencer with a built-in damper
Can height / width - 130x220 mm
Valve type - Electric Inlet

Downpipe AUDI RS4 B9, RS5 B9
2,9 TFSI
2018-
450 bhp
Quattro

Inlet diameter - 114 mm 
Outlet diameter - 76 mm 

Possible options for configuring the kit are listed below.

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal passage silencer made of stainless steel.

Silencer can length - 400 mm
The width / height of the muffler can - 220/130 mm
The diameter of the intake pipe - 63.5, 70, 76 mm
The diameter of exhaust tips - 2x76
The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

The plow fits:

Can-Am

• Outlander 400 HO XT 2007-2010
• Outlander 400 XT 2011-2014
• Outlander 500 HO XT 2007-2010
• Outlander 500 HO XT-P 2010
• Outlander 500 XT 2011-2012
• Outlander 650 HO XT 2007-2010
• Outlander 650 XT 2011-2012
• Outlander 650 XT-P 2010-2011
• Outlander 800 HO XT 2007-2010
• Outlander 800R XT 2011
• Outlander 800R XT-P 2010-2011
• Outlander Max 800 HO XT 2007-2010
• Outlander Max 800R XT 2011
• Outlander Max 800R XT-P 2010-2012
  
  
  Assembly instructions for plows: YouTube - SQUDDE 
  

Universal silencer based on aluminized construction of the box.
Total length - 620 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 250 mm
Diameter of tips - 76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 50 mm

Catback - middle and end silencer TOYOTA YARIS GR 1.6
1,6
2020-
261 km
AWD
Pipe diameter - 76 mm

The kit does not include mounting screws and gaskets.

It is possible to buy a front part - downpipe TOYOTA YARIS GR

All possible options of configuring the downpipe can be found below.

The product is not homologated and cannot be approved for use on public roads in the EU.

Das Produkt besitzt keine Homologation und darf nicht auf öffentlichen Straßen in der EU verwendet werden.

Downpipe fits version originally equipped with catalytic converter with EURO 6 standard.
BMW G30 540d B57
2016 - 
340 bhp
Pipe diameter - 80 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Satin stainless steel slanted exhaust tip without a clamp with a diffuser.

• Inner intake diameter - 50, 63 mm
• Diameter of the tip - 76 mm 
• Total length of tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
• Tip length - 105 mm

The first photo shows the applied logo on the tip.

Downpipe Decat for AUDI A5 S5 / Cabriolet / Sportback / Coupe 3.0 TDI +EGR plug

3.0 TDI

AUDI A5 S5 / Cabriolet
2018-2021

AUDI A5 S5 / Sportback / Coupe
2017-2021

286 KM
Quattro

Pipe diameter - 76 mm

There is a choice of versions:
without silencer, with a silencer or with catalytic converter

In addition, you can choose a version with or without a heat shield:

The product is not homologated and cannot be approved for use on public roads in the EU.

Satin stainless steel exhaust tip without a clamp with a diffuser.

• Inner intake diameter - 76 mm
• Diameter of the tip - 101 mm 
• Total length of tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
• Tip length - 105 mm

The first photo shows the applied logo on the tip.

Universal passage silencer made of stainless steel.

Damper can length - 400 mm
The width / height of the muffler can - 220/130 mm
Length of ends - 220 mm
Tip diameter - 2x76 mm
Inlet pipe diameter - 2x50, 50, 60, 63.5, 70, 76 mm

The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe Cupra Formentor 2.0 TSI

2.0 TSI 
2021-2022
310 bhp
4Drive

Fits OPF versions

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Possible options for configuring the kit are listed below.

Muffler dimensions:

Can height / width - 180x100 mm
The length of the silencer box - 250/300/350/400/450/500 mm
Inlet diameter - 50/60 / 63.5 / 70/76 mm

The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

GPF delete Hyundai Tucson IV 

1.6 T-GDi 
2020-
150 bhp
FWD

Pipe diameter - 63.5 mm

The product is not homologated and cannot be approved for use on public roads in the EU.


Below you can choose a version with or without a silencer:

Catback Skoda Octavia III RS 2.0 TSI

2.0 TSI

2013-2016

220/230 bhp

FWD

Exhaust pipe diameter - 63.5 mm

It is also possible to purchase the downpipe itself or a complete exhaust system.

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe set Volkswagen Golf VIII 2.0 TDI GTD +heat shield

2.0 TDI
2019-
200 hp

Pipe diameter - 76 mm
DPF OFF diameter - 63 mm

There is a choice of versions:
without silencer, with a silencer or with catalytic converter

In addition, you can choose a version with or without a heat shield:

The product is not homologated and cannot be approved for use on public roads in the EU.

A stainless steel silencer with a built-in damper
Can height / width - 130x220 mm
Valve type - Electric Inlet

Downpipe AUDI RS4 B9, RS5 B9
2,9 TFSI
2018-
450 bhp
Quattro

Inlet diameter - 114 mm 
Outlet diameter - 76 mm 

Possible options for configuring the kit are listed below.

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal passage silencer made of stainless steel.

Silencer can length - 400 mm
The width / height of the muffler can - 220/130 mm
The diameter of the intake pipe - 63.5, 70, 76 mm
The diameter of exhaust tips - 2x76
The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

The plow fits:

Can-Am

• Outlander 400 HO XT 2007-2010
• Outlander 400 XT 2011-2014
• Outlander 500 HO XT 2007-2010
• Outlander 500 HO XT-P 2010
• Outlander 500 XT 2011-2012
• Outlander 650 HO XT 2007-2010
• Outlander 650 XT 2011-2012
• Outlander 650 XT-P 2010-2011
• Outlander 800 HO XT 2007-2010
• Outlander 800R XT 2011
• Outlander 800R XT-P 2010-2011
• Outlander Max 800 HO XT 2007-2010
• Outlander Max 800R XT 2011
• Outlander Max 800R XT-P 2010-2012
  
  
  Assembly instructions for plows: YouTube - SQUDDE