The plow fits:

• CFMoto CForce 2019+
• CForce 800 XC
• CForce 850 XC
• CForce 1000 Overland 2021+

Assembly instructions for plows:  YouTube - SQUDDE 

Banners are printed on one side using CMYK solvent duct technology. Printing is done in 1080 DPI resolution. The banner is welded without wrinkles all around to strengthen the edges (weld width 25-30 mm). The banner is machine welded with galvanized stainless steel eyelets. Coated banner - 510 g/m2. It is characterized by high quality white, and increased durability (1000x1000 fibers). Additional advantage is the matte finish of this banner - does not give light reflections.
The banner is sold separately, without a frame.

Polished stainless steel tip with diffuser, choice of with or without clamp.

Intake diameter inside - 50 / 63,5 / 76 mm
Diameter of the tip - 76 / 89 / 101 mm
Total length of the tips - Ø76 / Ø89 - 140 mm, Ø101 - 155 mm
Tip length - 105 mm

Universal silencer based on aluminized construction of the box.

Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 2x76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 50 mm, 63,5 mm, 2x50 mm

The product is not homologated and cannot be approved for use on public roads in the EU. 

Downpipe Cupra Leon ST (Sportstourer) 2.0 TSI with catalyst 

2.0 TSI 
2020-
310 bhp
AWD
Fits OPF versions

Casting material - stainless steel AISI 316L
Wall thickness - 3 mm

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Possible options for configuring the kit are listed below.

Alfa Romeo Mito downpipe with catalytic converter
EURO 4 emission standard 
1,4T 
135, 170 km
2009-2018 
FWD

Pipe diameter - 76 mm 
Diameter at the connection point with the turbo - 70 mm
Diameter at the point of connection with the rest of the system - 56 mm 

Below it is possible to choose the appropriate catalyst capacity - 100 or 200 cpsi

The product is not homologated and cannot be approved for use on public roads in the EU.

Men's kangaroo sweatshirt

•     65% cotton, 35% polyester
•     straight cut with side seams
•     hood with lining with drawstring
•     inner back hem reinforced with a colorful strip from the outer material
•     kangaroo pocket
•     bottom hem and sleeve cuffs made of 2:2 rib knit with 5% elastane
•     combed inner side
•     Label: woven

Sizing is understated, we advise you to choose a larger size.

DIMENSIONS: Length of the box - 650 - 950mm (every 50 mm)

Diameter of the box - 110/120/130/140/150/160 mm

Diameter of the inlet and inner pipe - 50/54/57/60/63,5/70/76 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Downpipe Fiat 500X 1.4T
1,4T 
170 bhp
2015-2018
FWD

Pipe diameter - 76 mm
Diameter at the connection point with the turbo - 70 mm
Diameter at the connection point with the downpipe - 56 mm 

The product is not homologated and cannot be approved for use on public roads in the EU.

A stainless steel silencer with a built-in damper
Can height / width - 130x220 mm
Valve type - Electric Inlet

Downpipe Hyundai i20N 
1.6 T-GDi
2021-
204 bhp
FWD
Pipe diameter - 76 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Possible options for configuring the kit are listed below.

Downpipe Audi SQ2 2.0 TFSI with catalyst 

2.0 TSI 
2020-
310 bhp
AWD
Fits OPF versions

Casting material - stainless steel AISI 316L
Wall thickness - 3 mm

Pipe Diameter - 89 mm
Diameter at the connection point with V-Band - 76 mm
Diameter at the connection point with the center section - 65 mm

Possible options for configuring the kit are listed below.

The product is not homologated and cannot be approved for use on public roads in the EU.

Muffler RM MOTORS JEEP Grand Cherokee WJ/WG 4.0 4.7

Below is a detailed list of models:

GRAND CHEROKEE II (WJ, WG)
4.0 4x4 (ERH) 3960ccm 190KM/140kW 1999/04-2005/09
4.7 V8 4x4 (EVA) 4701ccm 220KM/162kW 1999/04-2000/08
4.7 V8 4x4 (EVA) 4701ccm 223KM/164kW 1999/04-2005/09

Muffler to be welded in place of the original one. The diameter of the pipe, dimensions of the muffler box and its length were selected to make the installation of the muffler as easy as possible.
Model: E002/60/450

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal silencer based on aluminized construction of the box.

Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 50 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Complete RM Motors exhaust system for Seat Leon Cupra mk 3 (hatchback)
2.0 TSI
2013-
300 bhp
FWD

Pipe diameter - 76 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal passage silencer made of stainless steel.

Damper can length - 400 mm
The width / height of the muffler can - 220/130 mm
Tip length - 300 mm
Tip diameter - 63.5 mm
The diameter of the intake pipe - 50, 60 mm
The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.