Active filters

Catback - middle and end silencer TOYOTA YARIS...

PROM.SET5/RALLY

3,753.00 zł
Availability: 2 In Stock

Catback - middle and end silencer TOYOTA YARIS GR 1.6
1,6
2020-
261 km
AWD
Pipe diameter - 76 mm

The kit does not include mounting screws and gaskets.



It is possible to buy a front part - downpipe TOYOTA YARIS GR

All possible options of configuring the downpipe can be found below.

The product is not homologated and cannot be approved for use on public roads in the EU.

Das Produkt besitzt keine Homologation und darf nicht auf öffentlichen Straßen in der EU verwendet werden.

Universal E113 elliptical silencer

E113

719.00 zł
Availability: Out of stock

Universal passage silencer made of stainless steel.

Damper can length - 400 mm
The width / height of the muffler can - 220/130 mm
Tip length - 250 mm
Tip diameter - 89 mm
Inlet pipe diameter - 50, 60, 63.5, 70, 76 mm
The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal E204G elliptical silencer

E204G

610.00 zł
Availability: 1 In Stock

Universal passage silencer made of stainless steel.

Damper can length - 400 mm
The width / height of the muffler can - 220/130 mm
Tip length - 300 mm
Tip diameter - 63.5 mm
The diameter of the intake pipe - 50, 60 mm
The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal E105 elliptical silencer

E105

841.00 zł
Availability: 1 In Stock

Universal passage silencer made of stainless steel.

Damper can length - 400 mm
The width / height of the muffler can - 220/130 mm
Length of ends - 250 mm
Tip diameter - 2x76 mm
Inlet pipe diameter - 2x50, 50, 60, 63.5, 70, 76 mm
The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal E002 elliptical silencer

E002

508.00 zł
Availability: 1 In Stock

Universal passage silencer made of stainless steel.

Can height / width – 130×220 mm
Damper can length – 250, 300, 350, 400, 450, 500 mm
Inlet diameter – 50, 60, 63.5, 70, 76, mm
Inlet pipe length – 50 mm
The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal E003 elliptical silencer

E003

511.00 zł
Availability: 1 In Stock

Universal passage silencer made of stainless steel.

Can height / width – 130×220 mm
Damper can length – 250, 300, 350, 400, 450, 500 mm
Inlet diameter – 50, 60, 63.5, 70, 76, mm
Inlet pipe length – 50 mm
The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

EM001 elliptical silencer

EM001

376.00 zł
Availability: Out of stock

Muffler dimensions:

Can height / width - 180x100 mm
The length of the silencer box - 250/300/350/400/450/500 mm
Inlet diameter - 50/60 / 63.5 / 70/76 mm

The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Middle Silencer DODGE CHALLENGER V6 3.6 to weld

RM01/63/130/350

391.00 zł
Availability: 12 In Stock

Muffler ready to weld in the place of the original one. Pipe diameter, dimensions of the muffler box and its length are selected in such a way so that the silencer assembly is as easy as possible.

A silencer with a straight-through construction, damped with stainless steel wool and a glass mat resistant to 800 degrees Celsius (glass mat made of full hair - we do not use scraps). Fully welded by welding robot, hand finished. Each element of the product is made using CNC technology. Crack-resistant embossed bottoms have been used.

Muffler dimensions:

Can length - 350 mm
Pipe diameter - 63.5 mm
Can diameter - 130 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

RM MOTORS JEEP CHEROKEE XJ 2.5/4.0 Muffler

E002/60/450

592.00 zł
Availability: 2 In Stock

Muffler RM MOTORS JEEP Cherokee XJ, 2.5 and 4.0 benz.

Below is a detailed list of models:

2.5 (EPE) 2469ccm 121KM / 89kW 1995 / 10-2001 / 09

2.5 SE (EPE) 2464ccm 118KM / 87kW 1996 / 10-1999 / 09

2.5 i 4x4 (EPE HX) 2469ccm 122KM / 90kW 1991 / 12-2001 / 09

4.0 i (MX) 3960ccm 184KM / 135kW 1999 / 02-2001 / 09

4.0 i (MX) 3964ccm 184KM / 135kW 1991 / 12-2001 / 09

4.0 i 4x4 (ERH) 3964ccm 178KM / 131kW 1995/01-2001/09

Muffler to be welded on in place of the original one. The diameter of the pipe, the dimensions of the muffler box and its length are selected so that the assembly of the silencer is as easy as possible.

Model: E002 / 60/450

The product is not homologated and cannot be approved for use on public roads in the EU.

End silencer NISSAN 350Z to weld

RM01/63/130/350

391.00 zł
Availability: 12 In Stock

Muffler to weld in the place of the original one. Pipe diameter, dimensions of the muffler box and its length are selected in such a way so that the silencer assembly is as easy as possible.

A silencer with a straight-through construction, damped with stainless steel wool and a glass mat resistant to 800 degrees Celsius (glass mat made of full hair - we do not use scraps). Fully welded by welding robot, hand finished. Each element of the product is made using CNC technology. Crack-resistant embossed bottoms have been used.

Muffler dimensions:
Can length - 350 mm
Pipe diameter - 63.5 mm
Can diameter - 130 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

End silencer CHEVROLET Corvette 5.7 V8 to weld

E002/63/350

560.00 zł
Availability: 4 In Stock

Muffler to weld in the place of the original one. Pipe diameter, dimensions of the muffler box and its length are selected in such a way so that the silencer assembly is as easy as possible.

A silencer with a straight-through construction, damped with stainless steel wool and a glass mat resistant to 800 degrees Celsius (glass mat made of full hair - we do not use scraps). Fully welded by welding robot, hand finished. Each element of the product is made using CNC technology. Crack-resistant embossed bottoms have been used.

Muffler dimensions:
Can length - 350 mm
Pipe diameter - 63.5 mm
Can dimensions - 130x220 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Muffler RM MOTORS JEEP Grand Cherokee WJ/WG 4.0...

E002/60/450

592.00 zł
Availability: 2 In Stock

Muffler RM MOTORS JEEP Grand Cherokee WJ/WG 4.0 4.7

Below is a detailed list of models:

GRAND CHEROKEE II (WJ, WG)
4.0 4x4 (ERH) 3960ccm 190KM/140kW 1999/04-2005/09
4.7 V8 4x4 (EVA) 4701ccm 220KM/162kW 1999/04-2000/08
4.7 V8 4x4 (EVA) 4701ccm 223KM/164kW 1999/04-2005/09

Muffler to be welded in place of the original one. The diameter of the pipe, dimensions of the muffler box and its length were selected to make the installation of the muffler as easy as possible.
Model: E002/60/450

The product is not homologated and cannot be approved for use on public roads in the EU.

RM MOTORS JEEP COMMANDER V8 5.7 2006-2010 Silencer

E002/60/450

592.00 zł
Availability: 2 In Stock

Muffler RM MOTORS JEEP COMMANDER V8 5.7 2006-2010

COMMANDER (XK, XH)

5.7 HEMI 4x4 (EZH) 5654ccm 347KM / 255kW 2009 / 06-2010 / 12

5.7 V8 4x4 (EZB) 5654ccm 326HP / 240kW 2005 / 09-2010 / 12

Muffler to be welded on in the place of the original one. The diameter of the pipe, the dimensions of the muffler box and its length are selected in such a way so that the assembly of the silencer is as easy as possible.

Model: E002 / 60/450

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal elliptical silencer E008

E008/63/350

536.00 zł
Availability: 7 In Stock

Universal silencer made of acid-resistant steel
Inlet and outlet diameter - 63.5 mm
Height x width x length of the silencer box - 130x220x350 mm


The product is also available in a version with an embossing inside the passage that improves damping.

Check also other silencers from our offer.

The product is not homologated and cannot be approved for use on public roads in the EU.

Sports silencer RM104 with satin tip KSCS76/76DS

RM104/50

394.00 zł
Availability: 1 In Stock

Universal silencer based on aluminized construction of the box.

Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 50 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Sports silencer RM110 with polished tip KSCP76/76

RM110

342.00 zł
Availability: 17 In Stock

Universal silencer based on aluminized construction of the box.

Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 50 mm, 63,5 mm, 2x50 mm  

The product is not homologated and cannot be approved for use on public roads in the EU.

Sports silencer RM111 with polished tip KSZP76/76

RM111

346.00 zł
Availability: 3 In Stock

Universal silencer based on aluminized construction of the box.

Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 50 mm, 63,5 mm, 2x50 mm  

The product is not homologated and cannot be approved for use on public roads in the EU.