Mufflers

Catback - middle and end silencer TOYOTA YARIS GR 1.6
1,6
2020-
261 km
AWD
Pipe diameter - 76 mm

The kit does not include mounting screws and gaskets.

It is possible to buy a front part - downpipe TOYOTA YARIS GR

All possible options of configuring the downpipe can be found below.

The product is not homologated and cannot be approved for use on public roads in the EU.

Das Produkt besitzt keine Homologation und darf nicht auf öffentlichen Straßen in der EU verwendet werden.

Universal passage silencer made of stainless steel.

Damper can length - 400 mm
The width / height of the muffler can - 220/130 mm
Tip length - 250 mm
Tip diameter - 89 mm
Inlet pipe diameter - 50, 60, 63.5, 70, 76 mm
The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal passage silencer made of stainless steel.

Damper can length - 400 mm
The width / height of the muffler can - 220/130 mm
Tip length - 250 mm
Tip diameter - 76 mm
Inlet pipe diameter - 50, 60, 63.5, 70, 76 mm
The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal passage silencer made of stainless steel.

Can height / width – 130×220 mm
Damper can length – 250, 300, 350, 400, 450, 500 mm
Inlet diameter – 50, 60, 63.5, 70, 76, mm
Inlet pipe length – 50 mm
The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal passage silencer made of stainless steel.

Can height / width – 130×220 mm
Damper can length – 250, 300, 350, 400, 450, 500 mm
Inlet diameter – 50, 60, 63.5, 70, 76, mm
Inlet pipe length – 50 mm
The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Muffler dimensions:

Can height / width - 180x100 mm
The length of the silencer box - 250/300/350/400/450/500 mm
Inlet diameter - 50/60 / 63.5 / 70/76 mm

The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Muffler ready to weld in the place of the original one. Pipe diameter, dimensions of the muffler box and its length are selected in such a way so that the silencer assembly is as easy as possible.

A silencer with a straight-through construction, damped with stainless steel wool and a glass mat resistant to 800 degrees Celsius (glass mat made of full hair - we do not use scraps). Fully welded by welding robot, hand finished. Each element of the product is made using CNC technology. Crack-resistant embossed bottoms have been used.

Muffler dimensions:

Can length - 350 mm
Pipe diameter - 63.5 mm
Can diameter - 130 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Muffler RM MOTORS JEEP Cherokee XJ, 2.5 and 4.0 benz.

Below is a detailed list of models:

2.5 (EPE) 2469ccm 121KM / 89kW 1995 / 10-2001 / 09

2.5 SE (EPE) 2464ccm 118KM / 87kW 1996 / 10-1999 / 09

2.5 i 4x4 (EPE HX) 2469ccm 122KM / 90kW 1991 / 12-2001 / 09

4.0 i (MX) 3960ccm 184KM / 135kW 1999 / 02-2001 / 09

4.0 i (MX) 3964ccm 184KM / 135kW 1991 / 12-2001 / 09

4.0 i 4x4 (ERH) 3964ccm 178KM / 131kW 1995/01-2001/09

Muffler to be welded on in place of the original one. The diameter of the pipe, the dimensions of the muffler box and its length are selected so that the assembly of the silencer is as easy as possible.

Model: E002 / 60/450

The product is not homologated and cannot be approved for use on public roads in the EU.

Muffler to weld in the place of the original one. Pipe diameter, dimensions of the muffler box and its length are selected in such a way so that the silencer assembly is as easy as possible.

A silencer with a straight-through construction, damped with stainless steel wool and a glass mat resistant to 800 degrees Celsius (glass mat made of full hair - we do not use scraps). Fully welded by welding robot, hand finished. Each element of the product is made using CNC technology. Crack-resistant embossed bottoms have been used.

Muffler dimensions:
Can length - 350 mm
Pipe diameter - 63.5 mm
Can diameter - 130 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Muffler to weld in the place of the original one. Pipe diameter, dimensions of the muffler box and its length are selected in such a way so that the silencer assembly is as easy as possible.

A silencer with a straight-through construction, damped with stainless steel wool and a glass mat resistant to 800 degrees Celsius (glass mat made of full hair - we do not use scraps). Fully welded by welding robot, hand finished. Each element of the product is made using CNC technology. Crack-resistant embossed bottoms have been used.

Muffler dimensions:
Can length - 350 mm
Pipe diameter - 63.5 mm
Can dimensions - 130x220 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal passage silencer made of stainless steel.

Inside the muffler, an X-PIPE is used to equalize pressures in the exhaust system

Can height / width - 130x220 mm
Inlet pipe length - 50 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Muffler RM MOTORS JEEP Grand Cherokee WJ/WG 4.0 4.7

Below is a detailed list of models:

GRAND CHEROKEE II (WJ, WG)
4.0 4x4 (ERH) 3960ccm 190KM/140kW 1999/04-2005/09
4.7 V8 4x4 (EVA) 4701ccm 220KM/162kW 1999/04-2000/08
4.7 V8 4x4 (EVA) 4701ccm 223KM/164kW 1999/04-2005/09

Muffler to be welded in place of the original one. The diameter of the pipe, dimensions of the muffler box and its length were selected to make the installation of the muffler as easy as possible.
Model: E002/60/450

The product is not homologated and cannot be approved for use on public roads in the EU.

Sport straight through silencer made of acid-resistant steel
Can length - 300/400/480 mm
Can diameter - 88.9 mm
Inlet / passage diameter - 50/57/63.5 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Muffler RM MOTORS JEEP COMMANDER V8 5.7 2006-2010

COMMANDER (XK, XH)

5.7 HEMI 4x4 (EZH) 5654ccm 347KM / 255kW 2009 / 06-2010 / 12

5.7 V8 4x4 (EZB) 5654ccm 326HP / 240kW 2005 / 09-2010 / 12

Muffler to be welded on in the place of the original one. The diameter of the pipe, the dimensions of the muffler box and its length are selected in such a way so that the assembly of the silencer is as easy as possible.

Model: E002 / 60/450

The product is not homologated and cannot be approved for use on public roads in the EU.

A set of straight-through silencers made of acid-resistant steel with an integrated valve.
Can height / width - 130x220 mm

Stainless steel silencer with integrated damper 

Inlet/outlet diameter - 63,5 mm
Height x width length of the silencer box - 130x220 mm
Length of the silencer box - 300/400/500 mm

Check also other silencers from our offer.

Stainless steel embossed damper with integral damper 

Valve type - Vacuum
Pipe diameter - 63,5 mm, 76 mm
Height x width x length of the silencer box - 130x220x350 mm

Check also other silencers from our offer.

Stainless steel muffler with embossing with a built-in damper 
Pipe diameter - 63,5 mm. 76 mm
Valve type - vacuum
Height x width x length of the silencer box - 100x180x350 mm

Check also other silencers from our offer.

Stainless steel silencer with vacuum valve

Valve type - Vacuum
Diameter x length of silencer box - 120x350 mm

Check also other silencers from our offer.

Universal silencer based on aluminized construction of the box.

Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 50 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal silencer based on aluminized construction of the box.

Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 50 mm, 63,5 mm, 2x50 mm  

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal silencer based on aluminized construction of the box.

Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 50 mm, 63,5 mm, 2x50 mm  

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal silencer based on aluminized construction of the box.

Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 50 mm, 63,5 mm, 2x50 mm  

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal silencer based on aluminized construction of the box.

Total length - 580 mm
Length of the muffler box - 330 mm
Width/height of the muffler box - 210/120 mm
Length of tips - 200 mm
Diameter of tips - 76 mm
Diameter of the internal pipe - 50 mm
Diameter of the inlet - 50 mm, 63,5 mm, 2x50 mm  

The product is not homologated and cannot be approved for use on public roads in the EU.