Universal passage silencer made of stainless steel.

Damper can length - 400 mm
The width / height of the muffler can - 220/130 mm
Tip length - 250 mm
Tip diameter - 76 mm
Inlet pipe diameter - 50, 60, 63.5, 70, 76 mm
The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal passage silencer made of stainless steel.

Damper can length - 400 mm
The width / height of the muffler can - 220/130 mm
Tip length - 300 mm
Tip diameter - 63.5 mm
The diameter of the intake pipe - 50, 60 mm
The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal passage silencer made of stainless steel.

Silencer can length - 400 mm
The width / height of the muffler can - 220/130 mm
The diameter of the intake pipe - 63.5, 70, 76 mm
The diameter of exhaust tips - 2x76
The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal passage silencer made of stainless steel.

Damper can length - 400 mm
The width / height of the muffler can - 220/130 mm
Tip length - 200 mm
Tip diameter - 76 mm
Inlet pipe diameter - 50, 60, 63.5, 70, 76 mm
The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal passage silencer made of stainless steel.

Damper can length - 400 mm
The width / height of the muffler can - 220/130 mm
Tip length - 200 mm
Tip diameter - 89 mm
Inlet pipe diameter -  50, 60, 63.5, 70, 76 mm
The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal passage silencer made of stainless steel.

Damper can length - 400 mm
The width / height of the muffler can - 220/130 mm
Tip length - 200 mm
Tip diameter - 89 mm
Inlet pipe diameter - 50, 63.5, 70, 76 mm
The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal passage silencer made of stainless steel.

Inside the muffler, an X-PIPE is used to equalize pressures in the exhaust system

Can height / width - 130x220 mm
Inlet pipe length - 50 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

V-BAND Clamp

Diameter of the clamp - 2"- 4"

Exhalation valve (throttle) wirelessly controlled by a remote control - 63.5 mm

Enables control of exhaust gas flow and exhaust volume. 

Exhalation valve (throttle) wirelessly controlled by a remote control - 50 mm

Enables control of exhaust gas flow and exhaust volume. 

Exhalation valve (throttle) wirelessly controlled by a remote control - 76 mm

Enables control of exhaust gas flow and exhaust volume. 

VOLKSWAGEN Golf VI R End Silencer
2.0 TFSI
2009-2013
271 bhp
4Motion
Pipe diameter - 76 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

VOLKSWAGEN Golf VI R End Silencer
2.0 TFSI
2009-2013
271 bhp
4Motion
Pipe diameter - 63.5 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Volkswagen Passat III 1.8TSI with catalyst

1.8 TSI
2015-2018
180 bhp
FWD
Sedan, Combi 

Pipe diameter - 76 mm
Diameter of the pipe at the connection point with the center section - 60 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

It is possible to select the emission standard of the catalyst and the capacity:

Flange F91

Thickness - 10 mm


Flange connecting the downpipe to the turbine.

Fits the following models:
AUDI S6,S7,RS6,RS7 C7 4.0 TFSI 2012-2017.

Y-PIPE exhaust tee made of acid-proof steel.
Inlet diameter: 50, 60, 63.5, 70, 76 mm
Outlet 2x50 mm

The element can be used to join two exhaust pipes into one (V-type and Boxer engines), or to separate the exhaust into 2 mufflers.

Downpipe NISSAN GT-R 3.8 Twin-Turbo 2011-2016
The left and right initial parts fit the original exhaust.

NISSAN GT-R
3.8 Twin-Turbo
2011-2016
530, 550 bhp
AWD
Pipe diameter - 76 mm

The product is not homologated and cannot be approved for use on public roads in the EU.

Brass threaded end cap
Thread - M18
Stroke - 1.5 mm
Type of material - brass

Brass threaded end cap
Thread - M12
Stroke - 1.25 mm
Type of material - brass

Brass threaded end cap
Thread - M14
Stroke - 1.50 mm
Type of material - brass

Exhaust superflexible connector
Diameter - 40 mm
Material type - Stainless steel

exhaust flexible connector
Diameter - 45 mm
Type of the material - Stal nierdzewna

Exhaust superflexible connector
Diameter - 45 mm
Material type - Stainless steel

Exhaust flexible connector
Diameter - 50 mm
Material type - Stainless steel